diff --git a/build/exe/.cvsignore b/build/exe/.cvsignore
deleted file mode 100644
index 2b7b47f72be..00000000000
--- a/build/exe/.cvsignore
+++ /dev/null
@@ -1,2 +0,0 @@
-*.db
-dolibarr*.exe
diff --git a/build/exe/doliwamp/config.inc.php.install b/build/exe/doliwamp/config.inc.php.install
new file mode 100644
index 00000000000..a37052dac4c
--- /dev/null
+++ b/build/exe/doliwamp/config.inc.php.install
@@ -0,0 +1,822 @@
+<?php
+
+/* !!! DO NOT EDIT THIS FILE, EDIT config.inc.php INSTEAD !!! */
+
+/* $Id$ */
+// vim: expandtab sw=4 ts=4 sts=4:
+
+/**
+ * phpMyAdmin default configuration, you can copy values from here to your
+ * config.inc.php
+ *
+ * All directives are explained in Documentation.html
+ */
+
+
+/**
+ * Your phpMyAdmin URL.
+ *
+ * Complete the variable below with the full url ie
+ *    http://www.your_web.net/path_to_your_phpMyAdmin_directory/
+ *
+ * It must contain characters that are valid for a URL, and the path is
+ * case sensitive on some Web servers, for example Unix-based servers.
+ *
+ * In most cases you can leave this variable empty, as the correct value
+ * will be detected automatically. However, we recommend that you do
+ * test to see that the auto-detection code works in your system. A good
+ * test is to browse a table, then edit a row and save it.  There will be
+ * an error message if phpMyAdmin cannot auto-detect the correct value.
+ */
+$cfg['PmaAbsoluteUri'] = '';
+
+/**
+ * Disable the default warning that is displayed on the DB Details Structure page if
+ * any of the required Tables for the relationfeatures could not be found
+ */
+$cfg['PmaNoRelation_DisableWarning']  = FALSE;
+
+/**
+ * The 'cookie' auth_type uses blowfish algorithm to encrypt the password. If
+ * at least one server configuration uses 'cookie' auth_type, enter here a
+ * passphrase that will be used by blowfish. The maximum length seems to be 46
+ * characters.
+ */
+$cfg['blowfish_secret'] = '';
+
+/**
+ * Server(s) configuration
+ */
+$i = 0;
+// The $cfg['Servers'] array starts with $cfg['Servers'][1].  Do not use
+// $cfg['Servers'][0]. You can disable a server config entry by setting host
+// to ''. If you want more than one server, just copy following section
+// (including $i incrementation) serveral times. There is no need to define
+// full server array, just define values you need to change.
+$i++;
+$cfg['Servers'][$i]['host']          = 'localhost'; // MySQL hostname or IP address
+$cfg['Servers'][$i]['port']          = '3307';      // MySQL port - leave blank for default port
+$cfg['Servers'][$i]['socket']        = '';          // Path to the socket - leave blank for default socket
+$cfg['Servers'][$i]['connect_type']  = 'tcp';       // How to connect to MySQL server ('tcp' or 'socket')
+$cfg['Servers'][$i]['extension']     = 'mysqli';     // The php MySQL extension to use ('mysql' or 'mysqli')
+$cfg['Servers'][$i]['compress']      = FALSE;       // Use compressed protocol for the MySQL connection
+                                                    // (requires PHP >= 4.3.0)
+$cfg['Servers'][$i]['controluser']   = '';          // MySQL control user settings
+                                                    // (this user must have read-only
+$cfg['Servers'][$i]['controlpass']   = '';          // access to the "mysql/user"
+                                                    // and "mysql/db" tables).
+                                                    // The controluser is also
+                                                    // used for all relational
+                                                    // features (pmadb)
+$cfg['Servers'][$i]['auth_type']     = 'config';    // Authentication method (config, http or cookie based)?
+$cfg['Servers'][$i]['user']          = 'root';      // MySQL user
+$cfg['Servers'][$i]['password']      = 'WAMPMYSQLNEWPASSWORD';          // MySQL password (only needed
+                                                    // with 'config' auth_type)
+$cfg['Servers'][$i]['only_db']       = '';          // If set to a db-name, only
+                                                    // this db is displayed in left frame
+                                                    // It may also be an array of db-names, where sorting order is relevant.
+$cfg['Servers'][$i]['hide_db']       = '';          // Database name to be hidden from listings
+$cfg['Servers'][$i]['verbose']       = '';          // Verbose name for this host - leave blank to show the hostname
+
+$cfg['Servers'][$i]['pmadb']         = '';          // Database used for Relation, Bookmark and PDF Features
+                                                    // (see scripts/create_tables.sql)
+                                                    //   - leave blank for no support
+                                                    //     DEFAULT: 'phpmyadmin'
+$cfg['Servers'][$i]['bookmarktable'] = '';          // Bookmark table
+                                                    //   - leave blank for no bookmark support
+                                                    //     DEFAULT: 'pma_bookmark'
+$cfg['Servers'][$i]['relation']      = '';          // table to describe the relation between links (see doc)
+                                                    //   - leave blank for no relation-links support
+                                                    //     DEFAULT: 'pma_relation'
+$cfg['Servers'][$i]['table_info']    = '';          // table to describe the display fields
+                                                    //   - leave blank for no display fields support
+                                                    //     DEFAULT: 'pma_table_info'
+$cfg['Servers'][$i]['table_coords']  = '';          // table to describe the tables position for the PDF schema
+                                                    //   - leave blank for no PDF schema support
+                                                    //     DEFAULT: 'pma_table_coords'
+$cfg['Servers'][$i]['pdf_pages']     = '';          // table to describe pages of relationpdf
+                                                    //   - leave blank if you don't want to use this
+                                                    //     DEFAULT: 'pma_pdf_pages'
+$cfg['Servers'][$i]['column_info']   = '';          // table to store column information
+                                                    //   - leave blank for no column comments/mime types
+                                                    //     DEFAULT: 'pma_column_info'
+$cfg['Servers'][$i]['history']       = '';          // table to store SQL history
+                                                    //   - leave blank for no SQL query history
+                                                    //     DEFAULT: 'pma_history'
+$cfg['Servers'][$i]['verbose_check'] = TRUE;        // set to FALSE if you know that your pma_* tables
+                                                    // are up to date. This prevents compatibility
+                                                    // checks and thereby increases performance.
+$cfg['Servers'][$i]['AllowRoot']     = TRUE;        // whether to allow root login
+$cfg['Servers'][$i]['AllowDeny']['order']           // Host authentication order, leave blank to not use
+                                     = '';
+$cfg['Servers'][$i]['AllowDeny']['rules']           // Host authentication rules, leave blank for defaults
+                                     = array();
+
+// If you have more than one server configured, you can set $cfg['ServerDefault']
+// to any one of them to autoconnect to that server when phpMyAdmin is started,
+// or set it to 0 to be given a list of servers without logging in
+// If you have only one server configured, $cfg['ServerDefault'] *MUST* be
+// set to that server.
+$cfg['ServerDefault'] = 1;              // Default server (0 = no default server)
+
+/**
+ * Other core phpMyAdmin settings
+ */
+$cfg['OBGzip']                  = 'auto'; // use GZIP output buffering if possible (TRUE|FALSE|'auto')
+$cfg['PersistentConnections']   = FALSE;  // use persistent connections to MySQL database
+$cfg['ForceSSL']                = FALSE;  // whether to force using https
+$cfg['ExecTimeLimit']           = 300;    // maximum execution time in seconds (0 for no limit)
+$cfg['MemoryLimit']             = 0;      // maximum allocated bytes (0 for no limit)
+$cfg['SkipLockedTables']        = FALSE;  // mark used tables, make possible to show
+                                          // locked tables (since MySQL 3.23.30)
+$cfg['ShowSQL']                 = TRUE;   // show SQL queries as run
+$cfg['AllowUserDropDatabase']   = FALSE;  // show a 'Drop database' link to normal users
+$cfg['Confirm']                 = TRUE;   // confirm 'DROP TABLE' & 'DROP DATABASE'
+$cfg['LoginCookieRecall']       = TRUE;   // recall previous login in cookie auth. mode or not
+$cfg['LoginCookieValidity']     = 1800;   // validity of cookie login (in seconds)
+$cfg['UseDbSearch']             = TRUE;   // whether to enable the "database search" feature
+                                          // or not
+$cfg['IgnoreMultiSubmitErrors'] = FALSE;  // if set to true, PMA continues computing multiple-statement queries
+                                          // even if one of the queries failed
+$cfg['VerboseMultiSubmit']      = TRUE;   // if set to true, PMA will show the affected rows of EACH statement on
+                                          // multiple-statement queries. See the libraries/import.php file for 
+                                          // hardcoded defaults on how many queries a statement may contain!
+$cfg['AllowArbitraryServer']    = FALSE;  // allow login to any user entered server in cookie based auth
+
+// Left frame setup
+$cfg['LeftFrameLight']        = TRUE;    // use a select-based menu and display only the
+                                         // current tables in the left frame.
+$cfg['LeftFrameDBTree']       = TRUE;    // turn the select-based light menu into a tree
+$cfg['LeftFrameDBSeparator']  = '_';     // the separator to sub-tree the select-based light menu tree
+$cfg['LeftFrameTableSeparator']= '__';   // Which string will be used to generate table prefixes
+                                         // to split/nest tables into multiple categories
+$cfg['LeftFrameTableLevel']   = '1';     // How many sublevels should be displayed when splitting
+                                         // up tables by the above Separator
+$cfg['ShowTooltip']           = TRUE;    // display table comment as tooltip in left frame
+$cfg['ShowTooltipAliasDB']    = FALSE;   // if ShowToolTip is enabled, this defines that table/db comments
+$cfg['ShowTooltipAliasTB']    = FALSE;   // are shown (in the left menu and db_details_structure) instead of
+                                         // table/db names. Setting ShowTooltipAliasTB to 'nested' will only
+                                         // use the Aliases for nested descriptors, not the table itself.
+
+$cfg['LeftDisplayLogo']       = TRUE;   // display logo at top of left frame
+$cfg['LeftDisplayServers']    = FALSE;  // display server choice at top of left frame
+$cfg['DisplayServersList']    = FALSE;  // server choice as links
+
+// In the main frame, at startup...
+$cfg['ShowStats']             = TRUE;   // allow to display statistics and space usage in
+                                        // the pages about database details and table
+                                        // properties
+$cfg['ShowPhpInfo']           = FALSE;  // information" and "change password" links for
+$cfg['ShowChgPassword']       = FALSE;  // simple users or not
+$cfg['SuggestDBName']         = TRUE;   // suggest a new DB name if possible (false = keep empty)
+
+// In browse mode...
+$cfg['ShowBlob']              = FALSE;  // display blob field contents
+$cfg['NavigationBarIconic']   = 'both'; // Use icons instead of text for the navigation bar buttons
+                                        // and on right panel top menu (server db table) (TRUE|FALSE|'both')
+$cfg['ShowAll']               = FALSE;  // allows to display all the rows
+$cfg['MaxRows']               = 30;     // maximum number of rows to display
+$cfg['Order']                 = 'ASC';  // default for 'ORDER BY' clause (valid
+                                        // values are 'ASC', 'DESC' or 'SMART' -ie
+                                        // descending order for fields of type
+                                        // TIME, DATE, DATETIME & TIMESTAMP,
+                                        // ascending order else-)
+
+// In edit mode...
+$cfg['ProtectBinary']         = 'blob'; // disallow editing of binary fields
+                                        // valid values are:
+                                        //   FALSE  allow editing
+                                        //   'blob' allow editing except for BLOB fields
+                                        //   'all'  disallow editing
+$cfg['ShowFunctionFields']    = TRUE;   // Display the function fields in edit/insert mode
+$cfg['CharEditing']           = 'input';
+                                        // Which editor should be used for CHAR/VARCHAR fields:
+                                        //  input - allows limiting of input length
+                                        //  textarea - allows newlines in fields
+$cfg['InsertRows']            = 2;      // How many rows can be inserted at one time
+
+$cfg['ForeignKeyDropdownOrder'] =       // Sort order for items in a foreign-key dropdown box. 
+    array( 'content-id', 'id-content'); // 'content' is the referenced data, 'id' is the key value.
+$cfg['ForeignKeyMaxLimit'] = 100;       // A dropdown will be used if fewer items are present
+
+
+// For the export features...
+$cfg['ZipDump']               = TRUE;   // Allow the use of zip/gzip/bzip
+$cfg['GZipDump']              = TRUE;   // compression for
+$cfg['BZipDump']              = TRUE;   // dump files
+$cfg['CompressOnFly']         = TRUE;   // Will compress gzip/bzip2 exports on
+                                        // fly without need for much memory.
+                                        // If you encounter problems with
+                                        // created gzip/bzip2 files disable
+                                        // this feature.
+
+// Tabs display settings
+$cfg['LightTabs']             = FALSE;  // use graphically less intense menu tabs
+$cfg['PropertiesIconic']      = TRUE;   // Use icons instead of text for the table display of a database (TRUE|FALSE|'both')
+$cfg['PropertiesNumColumns']  = 1;      // How many columns should be used for table display of a database?
+                                        // (a value larger than 1 results in some information being hidden)
+
+$cfg['DefaultTabServer']      = 'main.php';
+                                   // Possible values:
+                                   // 'main.php' = the welcome page
+                                   // (recommended for multiuser setups)
+                                   // 'server_databases.php' = list of databases
+                                   // 'server_status.php' = runtime information
+                                   // 'server_variables.php' = MySQL server variables
+                                   // 'server_privileges.php' = user management
+                                   // 'server_processlist.php' = process list
+$cfg['DefaultTabDatabase']    = 'db_details_structure.php';
+                                   // Possible values:
+                                   // 'db_details_structure.php' = tables list
+                                   // 'db_details.php' = sql form
+                                   // 'db_search.php' = search query
+                                   // 'db_operations.php' = operations on database
+$cfg['DefaultTabTable']       = 'tbl_properties_structure.php';
+                                   // Possible values:
+                                   // 'tbl_properties_structure.php' = fields list
+                                   // 'tbl_properties.php' = sql form
+                                   // 'tbl_select.php' = select page
+                                   // 'tbl_change.php' = insert row page
+                                   // 'sql.php' = browse page
+
+/**
+ * Export defaults
+ */
+
+$cfg['Export']['format']                    = 'sql';  // sql/latex/excel/csv/xml/xls/htmlexcel/htmlword
+$cfg['Export']['compression']               = 'none'; // none/zip/gzip/bzip2
+
+$cfg['Export']['asfile']                    = FALSE;
+$cfg['Export']['charset']                   = '';
+$cfg['Export']['onserver']                  = FALSE;
+$cfg['Export']['onserver_overwrite']        = FALSE;
+$cfg['Export']['remember_file_template']    = TRUE;
+$cfg['Export']['file_template_table']       = '__TABLE__';
+$cfg['Export']['file_template_database']    = '__DB__';
+$cfg['Export']['file_template_server']      = '__SERVER__';
+
+$cfg['Export']['htmlexcel_columns']         = FALSE;
+$cfg['Export']['htmlexcel_null']            = 'NULL';
+
+$cfg['Export']['htmlword_structure']        = TRUE;
+$cfg['Export']['htmlword_data']             = TRUE;
+$cfg['Export']['htmlword_columns']          = FALSE;
+$cfg['Export']['htmlword_null']             = 'NULL';
+
+$cfg['Export']['xls_columns']               = FALSE;
+$cfg['Export']['xls_null']                  = 'NULL';
+
+$cfg['Export']['csv_columns']               = FALSE;
+$cfg['Export']['csv_null']                  = 'NULL';
+$cfg['Export']['csv_separator']             = ';';
+$cfg['Export']['csv_enclosed']              = '&quot;';
+$cfg['Export']['csv_escaped']               = '\\';
+$cfg['Export']['csv_terminated']            = 'AUTO';
+$cfg['Export']['excel_columns']             = FALSE;
+$cfg['Export']['excel_null']                = 'NULL';
+$cfg['Export']['excel_edition']             = 'win'; // win/mac
+
+$cfg['Export']['latex_structure']           = TRUE;
+$cfg['Export']['latex_data']                = TRUE;
+$cfg['Export']['latex_columns']             = TRUE;
+$cfg['Export']['latex_relation']            = TRUE;
+$cfg['Export']['latex_comments']            = TRUE;
+$cfg['Export']['latex_mime']                = TRUE;
+$cfg['Export']['latex_null']                = '\textit{NULL}';
+$cfg['Export']['latex_caption']             = TRUE;
+$cfg['Export']['latex_data_label']          = 'tab:__TABLE__-data';
+$cfg['Export']['latex_structure_label']     = 'tab:__TABLE__-structure';
+
+$cfg['Export']['sql_structure']             = TRUE;
+$cfg['Export']['sql_data']                  = TRUE;
+$cfg['Export']['sql_compat']                = 'NONE';
+$cfg['Export']['sql_disable_fk']            = FALSE;
+$cfg['Export']['sql_use_transaction']       = FALSE;
+$cfg['Export']['sql_drop_database']         = FALSE;
+$cfg['Export']['sql_drop_table']            = FALSE;
+$cfg['Export']['sql_if_not_exists']         = FALSE;
+$cfg['Export']['sql_auto_increment']        = TRUE;
+$cfg['Export']['sql_backquotes']            = TRUE;
+$cfg['Export']['sql_dates']                 = FALSE;
+$cfg['Export']['sql_relation']              = FALSE;
+$cfg['Export']['sql_columns']               = TRUE;
+$cfg['Export']['sql_delayed']               = FALSE;
+$cfg['Export']['sql_ignore']                = FALSE;
+$cfg['Export']['sql_hex_for_binary']        = TRUE;
+$cfg['Export']['sql_type']                  = 'insert'; // insert/update/replace
+$cfg['Export']['sql_extended']              = TRUE;
+$cfg['Export']['sql_max_query_size']        = 50000;
+$cfg['Export']['sql_comments']              = FALSE;
+$cfg['Export']['sql_mime']                  = FALSE;
+$cfg['Export']['sql_header_comment']        = ''; // \n is replaced by new line
+
+$cfg['Export']['pdf_structure']             = FALSE;
+$cfg['Export']['pdf_data']                  = TRUE;
+$cfg['Export']['pdf_report_title']          = '';
+
+/**
+ * Import defaults
+ */
+$cfg['Import']['format'] = 'sql';
+$cfg['Import']['allow_interrupt'] = TRUE;
+$cfg['Import']['skip_queries'] = '0';
+$cfg['Import']['csv_replace'] = FALSE;
+$cfg['Import']['csv_terminated'] = ';';
+$cfg['Import']['csv_enclosed'] = '"';
+$cfg['Import']['csv_escaped'] = '\\';
+$cfg['Import']['csv_new_line'] = 'auto';
+$cfg['Import']['csv_columns'] = '';
+$cfg['Import']['ldi_replace'] = FALSE;
+$cfg['Import']['ldi_terminated'] = ';';
+$cfg['Import']['ldi_enclosed'] = '"';
+$cfg['Import']['ldi_escaped'] = '\\';
+$cfg['Import']['ldi_new_line'] = 'auto';
+$cfg['Import']['ldi_columns'] = '';
+$cfg['Import']['ldi_local_option'] = 'auto'; // 'auto' for autodetection, TRUE or FALSE for forcing
+
+
+/**
+ * Link to the official MySQL documentation.
+ * Be sure to include no trailing slash on the path.
+ * See http://dev.mysql.com/doc/ for more information
+ * about MySQL manuals and their types.
+ */
+$cfg['MySQLManualBase'] = 'http://dev.mysql.com/doc/refman';
+
+/**
+ * Type of MySQL documentation:
+ *   viewable   - "viewable online", current one used on MySQL website
+ *   searchable - "Searchable, with user comments"
+ *   chapters   - "HTML, one page per chapter"
+ *   chapters_old - "HTML, one page per chapter", format used prior to MySQL 5.0 release
+ *   big        - "HTML, all on one page"
+ *   old        - old style used in phpMyAdmin 2.3.0 and sooner
+ *   none       - do not show documentation links
+ */
+$cfg['MySQLManualType'] = 'viewable';
+
+
+/**
+ * PDF options
+ */
+$cfg['PDFPageSizes']        = array('A3', 'A4', 'A5', 'letter', 'legal');
+$cfg['PDFDefaultPageSize']  = 'A4';
+
+
+/**
+ * Language and charset conversion settings
+ */
+// Default language to use, if not browser-defined or user-defined
+$cfg['DefaultLang'] = 'en-iso-8859-1';
+
+// Default connection collation (used for MySQL >= 4.1)
+$cfg['DefaultConnectionCollation'] = 'utf8_unicode_ci';
+
+// Force: always use this language - must be defined in
+//        libraries/select_lang.lib.php
+// $cfg['Lang']     = 'en-iso-8859-1';
+
+// Regullar expression to limit listed languages, eg. '^(cs|en)' for Czech and
+// English only
+$cfg['FilterLanguages'] = '';
+
+// Default charset to use for recoding of MySQL queries, does not take
+// any effect when charsets recoding is switched off by
+// $cfg['AllowAnywhereRecoding'] or in language file
+// (see $cfg['AvailableCharsets'] to possible choices, you can add your own)
+$cfg['DefaultCharset'] = 'iso-8859-1';
+
+// Allow charset recoding of MySQL queries, must be also enabled in language
+// file to make harder using other language files than unicode.
+// Default value is FALSE to avoid problems on servers without the iconv
+// extension and where dl() is not supported
+$cfg['AllowAnywhereRecoding'] = FALSE;
+
+// You can select here which functions will be used for charset conversion.
+// Possible values are:
+//      auto   - automatically use available one (first is tested iconv, then
+//               recode)
+//      iconv  - use iconv or libiconv functions
+//      recode - use recode_string function
+$cfg['RecodingEngine'] = 'auto';
+
+// Specify some parameters for iconv used in charset conversion. See iconv
+// documentation for details:
+// http://www.gnu.org/software/libiconv/documentation/libiconv/iconv_open.3.html
+$cfg['IconvExtraParams'] = '//TRANSLIT';
+
+// Available charsets for MySQL conversion. currently contains all which could
+// be found in lang/* files and few more.
+// Charsets will be shown in same order as here listed, so if you frequently
+// use some of these move them to the top.
+$cfg['AvailableCharsets'] = array(
+    'iso-8859-1',
+    'iso-8859-2',
+    'iso-8859-3',
+    'iso-8859-4',
+    'iso-8859-5',
+    'iso-8859-6',
+    'iso-8859-7',
+    'iso-8859-8',
+    'iso-8859-9',
+    'iso-8859-10',
+    'iso-8859-11',
+    'iso-8859-12',
+    'iso-8859-13',
+    'iso-8859-14',
+    'iso-8859-15',
+    'windows-1250',
+    'windows-1251',
+    'windows-1252',
+    'windows-1256',
+    'windows-1257',
+    'koi8-r',
+    'big5',
+    'gb2312',
+    'utf-16',
+    'utf-8',
+    'utf-7',
+    'x-user-defined',
+    'euc-jp',
+    'ks_c_5601-1987',
+    'tis-620',
+    'SHIFT_JIS'
+);
+
+/**
+ * Customization & design
+ *
+ * The graphical settings are now located in themes/themename/layout.inc.php
+ */
+
+$cfg['LeftPointerEnable']   = TRUE;         // enable the left panel pointer
+                                            // (used when LeftFrameLight is FALSE)
+                                            // see also LeftPointerColor
+                                            // in layout.inc.php
+
+$cfg['BrowsePointerEnable'] = TRUE;        // enable the browse pointer
+                                            // see also BrowsePointerColor
+                                            // in layout.inc.php
+
+$cfg['BrowseMarkerEnable'] = TRUE;         // enable the browse marker
+                                            // see also BrowseMarkerColor
+                                            // in layout.inc.php
+
+$cfg['TextareaCols']        = 40;           // textarea size (columns) in edit mode
+                                            // (this value will be emphasized (*2) for sql
+                                            // query textareas and (*1.25) for query window)
+$cfg['TextareaRows']        = 7;            // textarea size (rows) in edit mode
+$cfg['LongtextDoubleTextarea'] = TRUE;      // double size of textarea size for longtext fields
+$cfg['TextareaAutoSelect']  = TRUE;         // autoselect when clicking in the textarea of the querybox
+$cfg['CharTextareaCols']    = 40;           // textarea size (columns) for CHAR/VARCHAR
+$cfg['CharTextareaRows']    = 2;            // textarea size (rows) for CHAR/VARCHAR
+$cfg['CtrlArrowsMoving']    = TRUE;         // Enable Ctrl+Arrows moving between fields when editing?
+$cfg['LimitChars']          = 50;           // Max field data length in browse mode for all non-numeric fields
+$cfg['ModifyDeleteAtLeft']  = TRUE;         // show edit/delete links on left side of browse
+                                            // (or at the top with vertical browse)
+$cfg['ModifyDeleteAtRight'] = FALSE;        // show edit/delete links on right side of browse
+                                            // (or at the bottom with vertical browse)
+$cfg['DefaultDisplay']      = 'horizontal'; // default display direction
+                                            // (horizontal|vertical|horizontalflipped)
+$cfg['DefaultPropDisplay']  = 'horizontal'; // default display direction for altering/
+                                            // creating columns (tbl_properties)
+                                            // (horizontal|vertical)
+
+$cfg['HeaderFlipType']      = 'css';        // table-header rotation via faking or css? (css|fake)
+                                            // NOTE: CSS only works in IE browsers!
+$cfg['ShowBrowseComments']  = TRUE;         // shows stored relation-comments in 'browse' mode.
+$cfg['ShowPropertyComments']= TRUE;         // shows stored relation-comments in 'table property' mode.
+$cfg['RepeatCells']         = 100;          // repeat header names every X cells? (0 = deactivate)
+
+$cfg['EditInWindow']        = TRUE;         // Set to TRUE if Edit link should open the query to edit in the query window (assuming Javascript is enabled), and to FALSE if we should edit in the right panel 
+$cfg['QueryWindowWidth']    = 550;          // Width of Query window
+$cfg['QueryWindowHeight']   = 310;          // Height of Query window
+$cfg['QueryHistoryDB']      = FALSE;         // Set to TRUE if you want DB-based query history.
+                                            // If FALSE, this utilizes JS-routines to display
+                                            // query history (lost by window close)
+$cfg['QueryWindowDefTab']   = 'sql';        // which tab to display in the querywindow on startup
+                                            // (sql|files|history|full)
+$cfg['QueryHistoryMax']     = 25;           // When using DB-based query history, how many entries
+                                            // should be kept?
+$cfg['BrowseMIME']          = TRUE;         // Use MIME-Types (stored in column comments table) for
+$cfg['MaxExactCount']       = 20000;        // When approximate count < this, PMA will get exact count for
+                                            // table rows.
+$cfg['WYSIWYG-PDF']         = TRUE;         // Utilize DHTML/JS capabilities to allow WYSIWYG editing of
+                                            // the PDF page editor. Requires an IE6/Mozilla based browser.
+
+$cfg['NaturalOrder']        = TRUE;         // Sort table and database in natural order
+
+
+//-----------------------------------------------------------------------------
+// custom-setup by mkkeck: 2004-05-04
+//    some specials for new icons and scrollings
+// FIXME:
+// 2004-05-08 rabus: We need to rearrange these variables.
+
+$cfg['ShowHttpHostTitle']   = TRUE;            // show HttpHost in browsers window title (true|false)?
+$cfg['SetHttpHostTitle']    = '';              // if ShowHttpHostTitle=true, please set your host (server)
+                                             // or an other string, wich should be shown in browsers window title.
+                                             // If not set (or empty), the PMA will get your real Host-Adress.
+
+$cfg['ErrorIconic']          = TRUE;    // show some icons for warning, error and information messages (true|false)?
+$cfg['MainPageIconic']       = TRUE;    // show icons in list on main page and on menu tabs (true|false)?
+$cfg['ReplaceHelpImg']       = TRUE;    // show help button instead of strDocu (true|false)?
+
+// theme manager
+$cfg['ThemePath']           = './themes';    // using themes manager please set up here the path to 'themes'
+                                             // else leave empty
+$cfg['ThemeManager']        = TRUE;          // if you want to use selectable themes and if ThemesPath not empty
+                                             // set it to true, else set it to false (default is false);
+$cfg['ThemeDefault']        = 'original';         // set up default theme, if ThemePath not empty
+                                             // you can set up here an valid path to themes or 'original' for
+                                             // the original pma-theme
+$cfg['ThemePerServer']      = FALSE;         // allow diferent theme for each configured server
+
+//-----------------------------------------------------------------------------
+
+
+/**
+ * Default queries
+ * %d will be replaced by the database name.
+ * %t will be replaced by the table name.
+ * %f will be replaced by a list of field names.
+ * (%t and %f only applies to DefaultQueryTable)
+ */
+$cfg['DefaultQueryTable']    = 'SELECT * FROM %t WHERE 1';
+$cfg['DefaultQueryDatabase'] = '';
+
+/**
+ * SQL Query box settings
+ * These are the links display in all of the SQL Query boxes
+ */
+$cfg['SQLQuery']['Edit']      = TRUE;       // Edit link to change a query
+$cfg['SQLQuery']['Explain']   = TRUE;       // EXPLAIN on SELECT queries
+$cfg['SQLQuery']['ShowAsPHP'] = TRUE;       // Wrap a query in PHP
+$cfg['SQLQuery']['Validate']  = FALSE;      // Validate a query (see $cfg['SQLValidator'] as well)
+$cfg['SQLQuery']['Refresh']   = TRUE;       // Refresh the results page
+
+
+/**
+ * Webserver upload/save/import directories
+ */
+$cfg['UploadDir']             = '';         // Directory for uploaded files that can be executed by
+                                            // phpMyAdmin. For example './upload'. Leave empty for
+                                            // no upload directory support. Use %u for username 
+                                            // inclusion.
+$cfg['SaveDir']               = '';         // Directory where phpMyAdmin can save exported data on
+                                            // server. For example './save'. Leave empty for no save
+                                            // directory support. Use %u for username inclusion.
+$cfg['docSQLDir']             = '';         // Directory for docSQL imports, phpMyAdmin can import
+                                            // docSQL files from that directory. For example
+                                            // './docSQL'. Leave empty for no docSQL import support.
+$cfg['TempDir']               = '';         // Directory where phpMyAdmin can save temporary files.
+                                            // This is needed for MS Excel export, see documentation
+                                            // how to enable that.
+
+
+/**
+ * Misc. settings
+ */
+$cfg['GD2Available']          = 'auto';     // Is GD >= 2 available? Set to yes/no/auto. 'auto'
+                                            // does autodetection, which is a bit expensive for
+                                            // php < 4.3.0, but it is the only safe vay how to
+                                            // determine GD version.
+/**
+ * SQL Parser Settings
+ */
+$cfg['SQP']['fmtType']      = 'html';       // Pretty-printing style to use on queries (html, text, none)
+$cfg['SQP']['fmtInd']       = '1';          // Amount to indent each level (floats ok)
+$cfg['SQP']['fmtIndUnit']   = 'em';         // Units for indenting each level (CSS Types - {em,px,pt})
+// The graphical settings are now located in themes/themename/layout.inc.php
+
+/**
+ * If you wish to use the SQL Validator service, you should be
+ * aware of the following:
+ * All SQL statements are stored anonymously for statistical purposes.
+ * Mimer SQL Validator, Copyright 2002 Upright Database Technology.
+ * All rights reserved.
+ */
+$cfg['SQLValidator']['use']      = FALSE;   // Make the SQL Validator available
+$cfg['SQLValidator']['username'] = '';      // If you have a custom username, specify it here (defaults to anonymous)
+$cfg['SQLValidator']['password'] = '';      // Password for username
+
+/**
+ * Developers ONLY!
+ * To use the following, please install the DBG extension from http://dd.cron.ru/dbg/
+ */
+$cfg['DBG']['enable'] = FALSE;              // Make the DBG stuff available
+$cfg['DBG']['profile']['enable'] = FALSE;   // Produce profiling results of PHP
+$cfg['DBG']['profile']['threshold'] = 0.5;  // Threshold of long running code to display
+                                            // Anything below the threshold is not displayed
+
+
+/**
+ * MySQL settings
+ */
+// Column types;
+// varchar, tinyint, text and date are listed first, based on estimated popularity
+$cfg['ColumnTypes'] = array(
+   'VARCHAR',
+   'TINYINT',
+   'TEXT',
+   'DATE',
+   'SMALLINT',
+   'MEDIUMINT',
+   'INT',
+   'BIGINT',
+   'FLOAT',
+   'DOUBLE',
+   'DECIMAL',
+   'DATETIME',
+   'TIMESTAMP',
+   'TIME',
+   'YEAR',
+   'CHAR',
+   'TINYBLOB',
+   'TINYTEXT',
+   'BLOB',
+   'MEDIUMBLOB',
+   'MEDIUMTEXT',
+   'LONGBLOB',
+   'LONGTEXT',
+   'ENUM',
+   'SET',
+   'BOOL'
+);
+
+// Attributes
+// Note: the "ON UPDATE CURRENT_TIMESTAMP" attribute is added dynamically 
+// for MySQL >= 4.1.2, in libraries/tbl_properties.inc.php
+
+$cfg['AttributeTypes'] = array(
+   '',
+   'BINARY',
+   'UNSIGNED',
+   'UNSIGNED ZEROFILL'
+);
+
+// Available functions
+if ($cfg['ShowFunctionFields']) {
+    $cfg['Functions'] = array(
+       'ASCII',
+       'CHAR',
+       'SOUNDEX',
+       'LCASE',
+       'UCASE',
+       'NOW',
+       'PASSWORD',
+       'OLD_PASSWORD',
+       'MD5',
+       'SHA1',
+       'ENCRYPT',
+       'COMPRESS',
+       'UNCOMPRESS',
+       'RAND',
+       'LAST_INSERT_ID',
+       'COUNT',
+       'AVG',
+       'SUM',
+       'CURDATE',
+       'CURTIME',
+       'FROM_DAYS',
+       'FROM_UNIXTIME',
+       'PERIOD_ADD',
+       'PERIOD_DIFF',
+       'TO_DAYS',
+       'UNIX_TIMESTAMP',
+       'USER',
+       'WEEKDAY',
+       'CONCAT'
+    );
+
+    // Which column types will be mapped to which Group?
+    $cfg['RestrictColumnTypes'] = array(
+       'VARCHAR'      => 'FUNC_CHAR',
+       'TINYINT'      => 'FUNC_NUMBER',
+       'TEXT'         => 'FUNC_CHAR',
+       'DATE'         => 'FUNC_DATE',
+       'SMALLINT'     => 'FUNC_NUMBER',
+       'MEDIUMINT'    => 'FUNC_NUMBER',
+       'INT'          => 'FUNC_NUMBER',
+       'BIGINT'       => 'FUNC_NUMBER',
+       'FLOAT'        => 'FUNC_NUMBER',
+       'DOUBLE'       => 'FUNC_NUMBER',
+       'DECIMAL'      => 'FUNC_NUMBER',
+       'DATETIME'     => 'FUNC_DATE',
+       'TIMESTAMP'    => 'FUNC_DATE',
+       'TIME'         => 'FUNC_DATE',
+       'YEAR'         => 'FUNC_DATE',
+       'CHAR'         => 'FUNC_CHAR',
+       'TINYBLOB'     => 'FUNC_CHAR',
+       'TINYTEXT'     => 'FUNC_CHAR',
+       'BLOB'         => 'FUNC_CHAR',
+       'MEDIUMBLOB'   => 'FUNC_CHAR',
+       'MEDIUMTEXT'   => 'FUNC_CHAR',
+       'LONGBLOB'     => 'FUNC_CHAR',
+       'LONGTEXT'     => 'FUNC_CHAR',
+       'ENUM'         => '',
+       'SET'          => ''
+    );
+
+    // Map above defined groups to any function
+    $cfg['RestrictFunctions'] = array(
+        'FUNC_CHAR'   => array(
+            'ASCII',
+            'CHAR',
+            'SOUNDEX',
+            'LCASE',
+            'UCASE',
+            'PASSWORD',
+            'OLD_PASSWORD',
+            'MD5',
+            'SHA1',
+            'ENCRYPT',
+            'COMPRESS',
+            'UNCOMPRESS',
+            'LAST_INSERT_ID',
+            'USER',
+            'CONCAT'
+        ),
+
+        'FUNC_DATE'   => array(
+            'NOW',
+            'CURDATE',
+            'CURTIME',
+            'FROM_DAYS',
+            'FROM_UNIXTIME',
+            'PERIOD_ADD',
+            'PERIOD_DIFF',
+            'TO_DAYS',
+            'UNIX_TIMESTAMP',
+            'WEEKDAY'
+        ),
+
+        'FUNC_NUMBER' => array(
+            'ASCII',
+            'CHAR',
+            'MD5',
+            'SHA1',
+            'ENCRYPT',
+            'RAND',
+            'LAST_INSERT_ID',
+            'UNIX_TIMESTAMP',
+            'COUNT',
+            'AVG',
+            'SUM'
+        )
+    );
+
+    // Default functions for above defined groups
+    $cfg['DefaultFunctions'] = array(
+        'FUNC_CHAR'         => '',
+        'FUNC_DATE'         => '',
+        'FUNC_NUMBER'       => '',
+        'first_timestamp'   => 'NOW'
+    );
+
+
+} // end if
+
+// Search operators
+$cfg['NumOperators'] = array(
+   '=',
+   '>',
+   '>=',
+   '<',
+   '<=',
+   '!=',
+   'LIKE',
+   'NOT LIKE'
+);
+
+$cfg['TextOperators'] = array(
+   'LIKE',
+   'LIKE %...%',
+   'NOT LIKE',
+   '=',
+   '!=',
+   'REGEXP',
+   'NOT REGEXP'
+);
+
+$cfg['EnumOperators'] = array(
+   '=',
+   '!='
+);
+
+$cfg['SetOperators'] = array(
+   'IN',
+   'NOT IN'
+);
+
+$cfg['NullOperators'] = array(
+   'IS NULL',
+   'IS NOT NULL'
+);
+
+$cfg['UnaryOperators'] = array(
+   'IS NULL'     => 1,
+   'IS NOT NULL' => 1
+);
+
+?>
diff --git a/build/exe/doliwamp/dolibarr.conf.install b/build/exe/doliwamp/dolibarr.conf.install
new file mode 100644
index 00000000000..a220015cbed
--- /dev/null
+++ b/build/exe/doliwamp/dolibarr.conf.install
@@ -0,0 +1,21 @@
+Alias /dolibarr "WAMPROOT/www/dolibarr/htdocs/" 
+
+# to give access to dolibarr from outside 
+# replace the lines
+#
+#        Order Deny,Allow
+#	Deny from all
+#	Allow from 127.0.0.1
+#
+# by
+#
+#        Order Allow,Deny 
+#   Allow from all
+#
+
+<Directory "WAMPROOT/www/dolibarr/htdocs/">
+    Options Indexes FollowSymLinks MultiViews
+    AllowOverride all
+   Order Allow,Deny 
+   Allow from all
+</Directory>
\ No newline at end of file
diff --git a/build/exe/doliwamp/doliwamp.bmp b/build/exe/doliwamp/doliwamp.bmp
new file mode 100644
index 00000000000..18fda73b4e6
Binary files /dev/null and b/build/exe/doliwamp/doliwamp.bmp differ
diff --git a/build/exe/doliwamp/doliwamp2.4.iss b/build/exe/doliwamp/doliwamp2.4.iss
new file mode 100644
index 00000000000..a0010f8aa11
--- /dev/null
+++ b/build/exe/doliwamp/doliwamp2.4.iss
@@ -0,0 +1,694 @@
+; -- Doliwamp.iss --
+; Script to build an auto installer for Dolibarr.
+; Idea from WampServer 2 (http://www.wampserver.com)
+
+
+[Setup]
+; ----- Change this -----
+AppName=DoliWamp
+AppVerName=DoliWamp 2.4
+OutputBaseFilename=DoliWamp 2.4
+; Define full path from wich all relative path are defined
+; You must modify this to put here your dolibarr root directory
+SourceDir=C:\Work\Applis\WampServer\wamp\www\dolibarr_new\dolibarr
+; ----- End of change
+AppId=doliwamp
+AppPublisher=Laurent Destailleur - NLTechno
+AppPublisherURL=http://www.dolibarr.org
+AppSupportURL=http://www.dolibarr.org
+AppUpdatesURL=http://www.dolibarr.org
+AppComments=DoliWamp includes Dolibarr, Apache, PHP and Mysql softwares.
+AppCopyright=Copyright (C) 2008 Laurent Destailleur, NLTechno
+DefaultDirName=c:\dolibarr
+DefaultGroupName=Dolibarr
+LicenseFile=COPYING
+;Compression=none
+Compression=lzma/fast
+SolidCompression=yes
+WizardImageFile=build\exe\doliwamp\doliwamp.bmp
+WizardSmallImageFile=build\exe\doliwamp\doliwampsmall.bmp
+SetupIconFile=doc\images\dolibarr.ico
+PrivilegesRequired=poweruser
+DisableProgramGroupPage=yes
+ChangesEnvironment=no
+CreateUninstallRegKey=yes
+;UninstallDisplayIcon={app}\bidon
+OutputDir=build
+
+[Tasks]
+;Name: "autostart"; Description: "Automatically launch DoliWamp server on startup. If you check this option, Services will be installed as automatic. Otherwise, services will be installed as manual and will start and stop with the service manager."; GroupDescription: "Auto Start:" ;Flags: unchecked;
+Name: quicklaunchicon; Description: "Create a &Quick Launch icon"; GroupDescription: "Additional icons:"; Flags: unchecked
+Name: "desktopicon"; Description: "Create a &Desktop icon"; GroupDescription: "Additional icons:"; Flags: unchecked
+
+[Dirs]
+Name: "{app}\logs"
+Name: "{app}\tmp"
+Name: "{app}\dolibarr_documents"
+
+[Files]
+; Stop/start
+Source: "build\exe\doliwamp\stopdoliwamp.bat"; DestDir: "{app}\"; Flags: ignoreversion; AfterInstall: close()
+Source: "build\exe\doliwamp\startdoliwamp.bat"; DestDir: "{app}\"; Flags: ignoreversion;
+Source: "build\exe\doliwamp\removefiles.bat"; DestDir: "{app}\"; Flags: ignoreversion;
+Source: "build\exe\doliwamp\rundoliwamp.bat.install"; DestDir: "{app}\"; Flags: ignoreversion;
+Source: "build\exe\doliwamp\install_services.bat.install"; DestDir: "{app}\"; Flags: ignoreversion;
+Source: "build\exe\doliwamp\uninstall_services.bat.install"; DestDir: "{app}\"; Flags: ignoreversion;
+Source: "build\exe\doliwamp\mysqlinitpassword.bat.install"; DestDir: "{app}\"; Flags: ignoreversion;
+; PhpMyAdmin
+Source: "..\..\..\apps\phpmyadmin2.10.1\*.*"; DestDir: "{app}\apps\phpmyadmin2.10.1"; Flags: ignoreversion recursesubdirs onlyifdoesntexist; Excludes: "config.inc.php,wampserver.conf"
+; Apache
+Source: "..\..\..\bin\apache\apache2.2.6\*.*"; DestDir: "{app}\bin\apache\apache2.2.6"; Flags: ignoreversion recursesubdirs onlyifdoesntexist; Excludes: "httpd.conf,wampserver.conf"
+; Php
+Source: "..\..\..\bin\php\php5.2.5\*.*"; DestDir: "{app}\bin\php\php5.2.5"; Flags: ignoreversion recursesubdirs onlyifdoesntexist; Excludes: "php.ini,wampserver.conf"
+; Mysql
+Source: "..\..\..\bin\mysql\mysql5.0.45\*.*"; DestDir: "{app}\bin\mysql\mysql5.0.45"; Flags: ignoreversion recursesubdirs onlyifdoesntexist; Excludes: "my.ini,data\*,wampserver.conf"
+; Mysql database
+Source: "build\exe\doliwamp\mysql\*.*"; DestDir: "{app}\bin\mysql\mysql5.0.45\data\mysql"; Flags: ignoreversion recursesubdirs onlyifdoesntexist; Excludes: ".cvsignore,.project,CVS\*,Thumbs.db"
+; Config files
+Source: "build\exe\doliwamp\phpmyadmin.conf.install"; DestDir: "{app}\alias"; Flags: ignoreversion;
+Source: "build\exe\doliwamp\dolibarr.conf.install"; DestDir: "{app}\alias"; Flags: ignoreversion;
+Source: "build\exe\doliwamp\config.inc.php.install"; DestDir: "{app}\apps\phpmyadmin2.10.1"; Flags: ignoreversion;
+Source: "build\exe\doliwamp\httpd.conf.install"; DestDir: "{app}\bin\apache\apache2.2.6\conf"; Flags: ignoreversion;
+Source: "build\exe\doliwamp\my.ini.install"; DestDir: "{app}\bin\mysql\mysql5.0.45"; Flags: ignoreversion;
+Source: "build\exe\doliwamp\php.ini.install"; DestDir: "{app}\bin\php\php5.2.5"; Flags: ignoreversion;
+Source: "build\exe\doliwamp\index.php.install"; DestDir: "{app}\www"; Flags: ignoreversion;
+; Dolibarr
+Source: "external-libs\*.*"; DestDir: "{app}\www\dolibarr\external-libs"; Flags: ignoreversion recursesubdirs onlyifdoesntexist; Excludes: ".cvsignore,.project,CVS\*,Thumbs.db"
+Source: "htdocs\*.*"; DestDir: "{app}\www\dolibarr\htdocs"; Flags: ignoreversion recursesubdirs onlyifdoesntexist; Excludes: ".cvsignore,.project,CVS\*,Thumbs.db,telephonie\*,*\conf.php"
+Source: "doc\*.*"; DestDir: "{app}\www\dolibarr\doc"; Flags: ignoreversion recursesubdirs onlyifdoesntexist; Excludes: ".cvsignore,.project,CVS\*,Thumbs.db,wiki\*,plaquette\*,dev\*"
+Source: "dev\*.*"; DestDir: "{app}\www\dolibarr\dev"; Flags: ignoreversion recursesubdirs onlyifdoesntexist; Excludes: ".cvsignore,.project,CVS\*,Thumbs.db"
+Source: "mysql\*.*"; DestDir: "{app}\www\dolibarr\mysql"; Flags: ignoreversion recursesubdirs onlyifdoesntexist; Excludes: ".cvsignore,.project,CVS\*,Thumbs.db"
+Source: "scripts\*.*"; DestDir: "{app}\www\dolibarr\scripts"; Flags: ignoreversion recursesubdirs onlyifdoesntexist; Excludes: ".cvsignore,.project,CVS\*,Thumbs.db"
+Source: "*.*"; DestDir: "{app}\www\dolibarr"; Flags: ignoreversion onlyifdoesntexist; Excludes: ".cvsignore,.project,CVS\*,Thumbs.db"
+; Licence
+Source: "COPYRIGHT"; DestDir: "{app}";
+
+
+
+[Icons]
+Name: "{group}\Dolibarr"; Filename: "{app}\rundoliwamp.bat"; WorkingDir: "{app}"; IconFilename: {app}\www\dolibarr\doc\images\dolibarr.ico
+Name: "{group}\Start DoliWamp server"; Filename: "{app}\startdoliwamp.bat"; WorkingDir: "{app}"; IconFilename: {app}\www\dolibarr\doc\images\doliwampon.ico
+Name: "{group}\Stop DoliWamp server"; Filename: "{app}\stopdoliwamp.bat"; WorkingDir: "{app}"; IconFilename: {app}\www\dolibarr\doc\images\doliwampoff.ico
+Name: "{group}\Uninstall DoliWamp"; Filename: "{app}\unins000.exe"; WorkingDir: "{app}"; IconFilename: {app}\uninstall_services.bat
+Name: "{userappdata}\Microsoft\Internet Explorer\Quick Launch\Dolibarr"; WorkingDir: "{app}"; Filename: "{app}\rundoliwamp.bat"; Tasks: quicklaunchicon; IconFilename: {app}\www\dolibarr\doc\images\dolibarr.ico
+Name: "{userdesktop}\Dolibarr"; Filename: "{app}\rundoliwamp.bat"; Tasks: desktopicon; IconFilename: {app}\www\dolibarr\doc\images\dolibarr.ico
+;Start of servers fromstartup menu disabled as services are auto
+;Name: "{userstartup}\DoliWamp server"; Filename: "{app}\startdoliwamp.bat"; WorkingDir: "{app}"; Flags: runminimized; IconFilename: {app}\www\dolibarr\doc\images\dolibarr.ico
+
+
+[Code]
+
+//variables globales
+var phpVersion: String;
+var apacheVersion: String;
+var path: String;
+var pathWithSlashes: String;
+var Page: TInputQueryWizardPage;
+var smtp: String;
+
+var smtpServer: String;
+var apachePort: String;
+var mysqlPort: String;
+var newPassword: String;
+
+var srcFile: String;
+var destFile: String;
+var srcContents: String;
+var browser: String;
+var winPath: String;
+var mysqlVersion: String;
+var wampserverVersion: String;
+var phpmyadminVersion: String;
+var sqlitemanagerVersion: String;
+var tmp: String;
+var phpDllCopy: String;
+var batFile: String;
+
+
+//-----------------------------------------------
+
+//procedure lancée au début de l'installation, elle alerte sur les upgrades de WampServer
+
+function InitializeSetup(): Boolean;
+begin
+  Result := MsgBox('You will install Doliwamp (Apache+Mysql+PHP+Dolibarr) on your computer.' #13#13 'This setup install Dolibarr and third party softwares (Apache, Mysql and PHP) configured for ' #13 'a Dolibarr usage and could not be used for other reasons.' #13#13 'If you want to share your Apache, Mysql and PHP with other projects, you should make a manual' #13 'installation of Dolibarr on your own Apache, Mysql and PHP installation.' #13#13 'Do you want to continue install?', mbConfirmation, MB_YESNO) = idYes;
+end;
+
+
+
+//-----------------------------------------------
+
+//procedure qui ferme les services (si ils existent)
+
+procedure close();
+var myResult: Integer;
+begin
+path := ExpandConstant('{app}');
+winPath := ExpandConstant('{win}');
+
+pathWithSlashes := path;
+StringChange (pathWithSlashes, '\','/');
+
+batFile := path+'\stopdoliwamp.bat';
+Exec(batFile, '',path+'\', SW_HIDE, ewWaitUntilTerminated, myResult);
+end;
+
+
+
+
+//-----------------------------------------------------------
+//
+
+function NextButtonClick(CurPageID: Integer): Boolean;
+var myResult: Integer;
+begin
+
+  //MsgBox(''+CurPageID,mbConfirmation,MB_YESNO);
+
+  if CurPageID = Page.ID then
+  begin
+
+
+
+//----------------------------------------------
+// renommage du fichier c:/windows/php.ini
+//----------------------------------------------
+
+if FileExists ('c:/windows/php.ini') then
+begin
+  if MsgBox('A previous c:/windows/php.ini file has been detected in your Windows directory. Do you want DoliWamp to rename it to php_old.ini to avoid conflicts ?',mbConfirmation,MB_YESNO) = IDYES then
+  begin
+    RenameFile('c:/windows/php.ini','c:/windows/php_old.ini');
+  end
+end
+if FileExists ('c:/winnt/php.ini') then
+begin
+  if MsgBox('A previous c:/winnt/php.ini file has been detected in your Windows directory. Do you want DoliWamp to rename it to php_old.ini to avoid conflicts ?',mbConfirmation,MB_YESNO) = IDYES then
+  begin
+    RenameFile('c:/winnt/php.ini','c:/winnt/php_old.ini');
+  end
+end
+
+
+
+
+//----------------------------------------------
+// rundoliwamp.bat
+//----------------------------------------------
+
+destFile := pathWithSlashes+'/rundoliwamp.bat';
+srcFile := pathWithSlashes+'/rundoliwamp.bat.install';
+
+if not FileExists (destFile) and FileExists(srcFile) then
+begin
+
+  //navigateur
+  browser := 'explorer.exe';
+  if FileExists ('C:/Program Files/Mozilla Firefox/firefox.exe')  then
+  begin
+    if MsgBox('Firefox has been detected on your computer. Would you like to use it as the default browser with Dolibarr ?',mbConfirmation,MB_YESNO) = IDYES then
+    begin
+      browser := 'C:/Program Files/Mozilla Firefox/firefox.exe';
+    end
+  end
+  if browser = 'explorer.exe' then
+  begin
+    GetOpenFileName('Please choose your default browser. If you are not sure, just click Open :', browser, winPath,'exe files (*.exe)|*.exe|All files (*.*)|*.*' ,'exe');
+  end
+
+  LoadStringFromFile (srcFile, srcContents);
+  StringChange (srcContents, 'WAMPBROWSER', browser);
+  StringChange (srcContents, 'WAMPAPACHEPORT', apachePort);
+  SaveStringToFile(destFile,srcContents, False);
+end
+DeleteFile(SrcFile);
+
+
+
+
+//----------------------------------------------
+// Fichier alias phpmyadmin
+//----------------------------------------------
+
+destFile := pathWithSlashes+'/alias/phpmyadmin.conf';
+srcFile := pathWithSlashes+'/alias/phpmyadmin.conf.install';
+
+if not FileExists (destFile) then
+begin
+
+  LoadStringFromFile (srcFile, srcContents);
+
+  //installDir et version de phpmyadmin
+  StringChange (srcContents, 'WAMPROOT', pathWithSlashes);
+  StringChange (srcContents, 'WAMPPHPMYADMINVERSION', phpmyadminVersion);
+
+  SaveStringToFile(destFile,srcContents, False);
+end
+//else
+//begin
+
+  //mise à jour de la version de phpmyadmin
+//  tmp := GetIniString('apps','phpmyadminVersion',phpmyadminVersion,pathWithSlashes+'/wampmanager.conf');
+//  if not CompareText(tmp,phpmyadminVersion) = 0  then
+//  begin
+//    SetIniString('apps','phpmyadminVersion',phpmyadminVersion,pathWithSlashes+'/wampmanager.conf');
+//    LoadStringFromFile (destFile, srcContents);
+//    StringChange (srcContents, tmp, phpmyadminVersion);
+//    SaveStringToFile(destFile,srcContents, False);
+//  end
+//end
+DeleteFile(SrcFile);
+
+
+
+//----------------------------------------------
+// Fichier alias dolibarr
+//----------------------------------------------
+
+destFile := pathWithSlashes+'/alias/dolibarr.conf';
+srcFile := pathWithSlashes+'/alias/dolibarr.conf.install';
+
+if not FileExists (destFile) then
+begin
+
+  LoadStringFromFile (srcFile, srcContents);
+
+  StringChange (srcContents, 'WAMPROOT', pathWithSlashes);
+  StringChange (srcContents, 'WAMPMYSQLNEWPASSWORD', newPassword);
+
+  SaveStringToFile(destFile,srcContents, False);
+end
+DeleteFile(SrcFile);
+
+
+
+
+//----------------------------------------------
+// Fichier de configuration de phpmyadmin
+//----------------------------------------------
+
+destFile := pathWithSlashes+'/apps/phpmyadmin'+phpmyadminVersion+'/config.inc.php';
+srcFile := pathWithSlashes+'/apps/phpmyadmin'+phpmyadminVersion+'/config.inc.php.install';
+
+if not FileExists (destFile) then
+begin
+
+  // si un fichier existe pour une version precedente de phpmyadmin, on le recupere
+  if FileExists (pathWithSlashes+'/apps/phpmyadmin'+tmp+'/config.inc.php') then
+  begin
+    LoadStringFromFile (pathWithSlashes+'/apps/phpmyadmin'+tmp+'/config.inc.php', srcContents);
+    StringChange (srcContents, 'WAMPMYSQLNEWPASSWORD', newPassword);
+    SaveStringToFile(destFile,srcContents, False);
+  end
+  else
+  begin
+    // sinon on prends le fichier par defaut
+    LoadStringFromFile (srcFile, srcContents);
+    StringChange (srcContents, 'WAMPMYSQLNEWPASSWORD', newPassword);
+    SaveStringToFile(destFile,srcContents, False);
+  end
+end
+//DeleteFile(SrcFile);
+
+
+
+//----------------------------------------------
+// Fichier httpd.conf
+//----------------------------------------------
+
+destFile := pathWithSlashes+'/bin/apache/apache'+apacheVersion+'/conf/httpd.conf';
+srcFile := pathWithSlashes+'/bin/apache/apache'+apacheVersion+'/conf/httpd.conf.install';
+
+if not FileExists (destFile) then
+begin
+  LoadStringFromFile (srcFile, srcContents);
+
+  //installDir et version de php
+  StringChange (srcContents, 'WAMPROOT', pathWithSlashes);
+  StringChange (srcContents, 'WAMPPHPVERSION', phpVersion);
+
+  SaveStringToFile(destFile,srcContents, False);
+end
+//DeleteFile(SrcFile);
+
+
+
+
+//----------------------------------------------
+// Fichier my.ini
+//----------------------------------------------
+
+destFile := pathWithSlashes+'/bin/mysql/mysql'+mysqlVersion+'/my.ini';
+srcFile := pathWithSlashes+'/bin/mysql/mysql'+mysqlVersion+'/my.ini.install';
+
+if not FileExists (destFile) then
+begin
+  LoadStringFromFile (srcFile, srcContents);
+
+  //installDir et version de php
+  StringChange (srcContents, 'WAMPROOT', pathWithSlashes);
+
+  SaveStringToFile(destFile,srcContents, False);
+end
+//DeleteFile(SrcFile);
+
+
+
+
+
+//----------------------------------------------
+// Fichier index.php
+//----------------------------------------------
+
+destFile := pathWithSlashes+'/www/index.php';
+srcFile := pathWithSlashes+'/www/index.php.install';
+
+if not FileExists (destFile) then
+begin
+  LoadStringFromFile (srcFile, srcContents);
+  StringChange (srcContents, 'WAMPPHPVERSION', phpVersion);
+  StringChange (srcContents, 'WAMPMYSQLVERSION', mysqlVersion);
+  StringChange (srcContents, 'WAMPAPACHEVERSION', apacheVersion);
+  SaveStringToFile(destFile, srcContents, False);
+end
+else
+begin
+  RenameFile(destFile, destFile+'.old');
+  LoadStringFromFile (srcFile, srcContents);
+  StringChange (srcContents, 'WAMPPHPVERSION', phpVersion);
+  StringChange (srcContents, 'WAMPMYSQLVERSION', mysqlVersion);
+  StringChange (srcContents, 'WAMPAPACHEVERSION', apacheVersion);
+  SaveStringToFile(destFile, srcContents, False);
+end
+DeleteFile(SrcFile);
+
+
+
+
+
+//----------------------------------------------
+// Fichier dolibarr
+//----------------------------------------------
+
+destFile := pathWithSlashes+'/www/dolibarr/conf/conf.php';
+srcFile := pathWithSlashes+'/www/dolibarr/conf/conf.php.example';
+
+if not FileExists (destFile) then
+begin
+  LoadStringFromFile (srcFile, srcContents);
+
+  //installDir et version de php
+  StringChange (srcContents, '$dolibarr_main_document_root=""', '$dolibarr_main_document_root="{app}/www/dolibarr/htdocs"');
+  StringChange (srcContents, '$dolibarr_main_data_root=""', '$dolibarr_main_data_root="{app}/dolibarr_documents"');
+  StringChange (srcContents, '$dolibarr_main_db_port=""', '$dolibarr_main_db_port="'+mysqlPort+'"');
+  StringChange (srcContents, '$dolibarr_main_db_user=""', '$dolibarr_main_db_user="admin"');
+  StringChange (srcContents, '$dolibarr_main_db_pass=""', '$dolibarr_main_db_user="'+newPassword+'"');
+
+  SaveStringToFile(destFile,srcContents, False);
+end
+
+
+
+
+
+//----------------------------------------------
+// Fichier install_services.bat
+//----------------------------------------------
+
+destFile := pathWithSlashes+'/install_services.bat';
+srcFile := pathWithSlashes+'/install_services.bat.install';
+
+if not FileExists (destFile) then
+begin
+
+  LoadStringFromFile (srcFile, srcContents);
+
+  //version de apache et mysql
+  StringChange (srcContents, 'WAMPMYSQLVERSION', mysqlVersion);
+  StringChange (srcContents, 'WAMPAPACHEVERSION', apacheVersion);
+
+  SaveStringToFile(destFile,srcContents, False);
+end
+DeleteFile(SrcFile);
+
+
+
+
+
+//----------------------------------------------
+// Fichier install_services_auto.bat
+//----------------------------------------------
+
+destFile := pathWithSlashes+'/install_services_auto.bat';
+srcFile := pathWithSlashes+'/install_services_auto.bat.install';
+
+if not FileExists (destFile) and FileExists (srcFile) then
+begin
+
+  LoadStringFromFile (srcFile, srcContents);
+
+  //version de apache et mysql
+  StringChange (srcContents, 'WAMPMYSQLVERSION', mysqlVersion);
+  StringChange (srcContents, 'WAMPAPACHEVERSION', apacheVersion);
+
+  SaveStringToFile(destFile,srcContents, False);
+end
+DeleteFile(SrcFile);
+
+
+
+
+//----------------------------------------------
+// Fichier uninstall_services.bat
+//----------------------------------------------
+
+destFile := pathWithSlashes+'/uninstall_services.bat';
+srcFile := pathWithSlashes+'/uninstall_services.bat.install';
+
+if not FileExists (destFile) then
+begin
+
+  LoadStringFromFile (srcFile, srcContents);
+
+  //version de apache et mysql
+  StringChange (srcContents, 'WAMPMYSQLVERSION', mysqlVersion);
+  StringChange (srcContents, 'WAMPAPACHEVERSION', apacheVersion);
+
+  SaveStringToFile(destFile,srcContents, False);
+end
+DeleteFile(SrcFile);
+
+
+
+//----------------------------------------------
+// Fichier mysqlinitpassword.bat
+//----------------------------------------------
+
+destFile := pathWithSlashes+'/mysqlinitpassword.bat';
+srcFile := pathWithSlashes+'/mysqlinitpassword.bat.install';
+
+if not FileExists (destFile) and FileExists (srcFile) then
+begin
+
+  LoadStringFromFile (srcFile, srcContents);
+
+  //version de apache et mysql
+  StringChange (srcContents, 'WAMPMYSQLVERSION', mysqlVersion);
+  StringChange (srcContents, 'WAMPMYSQLNEWPASSWORD', newPassword);
+
+  SaveStringToFile(destFile,srcContents, False);
+end
+DeleteFile(SrcFile);
+
+
+
+
+    //----------------------------------------------
+    // fichier php.ini dans php
+    //----------------------------------------------
+    destFile := pathWithSlashes+'/bin/php/php'+phpVersion+'/php.ini';
+    srcFile := pathWithSlashes+'/bin/php/php'+phpVersion+'/php.ini.install';
+
+    if not FileExists (destFile) then
+    begin
+      smtp := Page.Values[0];
+      LoadStringFromFile (srcFile, srcContents);
+      StringChange (srcContents, 'WAMPROOT', pathWithSlashes);
+      StringChange (srcContents, 'WAMPSMTP', smtp);
+      SaveStringToFile(destFile,srcContents, False);
+    end
+
+
+
+
+    //----------------------------------------------
+    // fichier phpForApache.ini dans php
+    //----------------------------------------------
+
+
+    
+    destFile := pathWithSlashes+'/bin/php/php'+phpVersion+'/phpForApache.ini';
+    if not FileExists (destFile) then
+    begin
+      SaveStringToFile(destFile,srcContents, False);
+    end
+
+
+
+    //----------------------------------------------
+    // fichier php.ini dans apache
+    //----------------------------------------------
+
+
+
+    destFile := pathWithSlashes+'/bin/apache/apache'+apacheVersion+'/bin/php.ini';
+    if not FileExists (destFile) then
+    begin
+      SaveStringToFile(destFile,srcContents, False);
+    end
+  //DeleteFile(SrcFile);
+
+
+  // Install services
+  //Filename: "{app}\uninstall_services.bat"; Flags: runhidden waituntilterminated
+  batFile := path+'\uninstall_services.bat';
+  Exec(batFile, '',path+'\', SW_HIDE, ewWaitUntilTerminated, myResult);
+  //Filename: "{app}\install_services.bat"; Flags: runhidden waituntilterminated
+  batFile := path+'\install_services.bat';
+  Exec(batFile, '',path+'\', SW_HIDE, ewWaitUntilTerminated, myResult);
+
+  // Stard services
+  //Filename: "{app}\startdoliwamp.bat"; Flags: runhidden waituntilterminated
+  batFile := path+'\startdoliwamp.bat';
+  Exec(batFile, '',path+'\', SW_HIDE, ewWaitUntilTerminated, myResult);
+
+  // Change mysql password
+  //Filename: "{app}\mysqlinitpassword.bat"; Flags: runhidden waituntilterminated
+  batFile := path+'\mysqlinitpassword.bat';
+  Exec(batFile, '',path+'\', SW_HIDE, ewWaitUntilTerminated, myResult);
+
+  // Remove bat file
+  //Filename: "{app}\removefiles.bat"; Flags: runhidden waituntilterminated
+  //  batFile := path+'\removefiles.bat';
+  //  Exec(batFile, '',path+'\', SW_HIDE, ewWaitUntilTerminated, myResult);
+
+  end
+
+  Result := True;
+
+end;
+
+
+
+
+
+//-----------------------------------------------
+
+//procedure lancée à la fin de l'installation, elle supprime les fichiers d'installation
+
+procedure DeinitializeSetup();
+
+begin
+//  DeleteFile(path+'\install_services.bat');
+//  DeleteFile(path+'\install_services_auto.bat');
+end;
+
+
+procedure InitializeWizard();
+begin
+  //version des applis, à modifier pour chaque version de WampServer 2
+  apacheVersion := '2.2.6';
+  phpVersion := '5.2.5' ;
+  mysqlVersion := '5.0.45';
+  wampserverVersion := '2.0';
+  phpmyadminVersion := '2.10.1';
+  sqlitemanagerVersion := '1.2.0';
+
+  smtpServer := 'localhost';
+  apachePort := '81';
+  mysqlPort := '3307';
+  newPassword := 'dolibarr';
+
+
+
+
+
+//----------------------------------------------
+// copie des dll de php vers apache
+//----------------------------------------------
+
+phpDllCopy := 'fdftk.dll';
+filecopy (pathWithSlashes+'/bin/php/php'+phpVersion+'/'+phpDllCopy, pathWithSlashes+'/bin/apache/apache'+apacheVersion+'/bin/'+phpDllCopy, False);
+phpDllCopy := 'fribidi.dll';
+filecopy (pathWithSlashes+'/bin/php/php'+phpVersion+'/'+phpDllCopy, pathWithSlashes+'/bin/apache/apache'+apacheVersion+'/bin/'+phpDllCopy, False);
+phpDllCopy := 'gds32.dll';
+filecopy (pathWithSlashes+'/bin/php/php'+phpVersion+'/'+phpDllCopy, pathWithSlashes+'/bin/apache/apache'+apacheVersion+'/bin/'+phpDllCopy, False);
+phpDllCopy := 'libeay32.dll';
+filecopy (pathWithSlashes+'/bin/php/php'+phpVersion+'/'+phpDllCopy, pathWithSlashes+'/bin/apache/apache'+apacheVersion+'/bin/'+phpDllCopy, False);
+phpDllCopy := 'libmhash.dll';
+filecopy (pathWithSlashes+'/bin/php/php'+phpVersion+'/'+phpDllCopy, pathWithSlashes+'/bin/apache/apache'+apacheVersion+'/bin/'+phpDllCopy, False);
+phpDllCopy := 'libmysql.dll';
+filecopy (pathWithSlashes+'/bin/php/php'+phpVersion+'/'+phpDllCopy, pathWithSlashes+'/bin/apache/apache'+apacheVersion+'/bin/'+phpDllCopy, False);
+phpDllCopy := 'msql.dll';
+filecopy (pathWithSlashes+'/bin/php/php'+phpVersion+'/'+phpDllCopy, pathWithSlashes+'/bin/apache/apache'+apacheVersion+'/bin/'+phpDllCopy, False);
+phpDllCopy := 'libmysqli.dll';
+filecopy (pathWithSlashes+'/bin/php/php'+phpVersion+'/'+phpDllCopy, pathWithSlashes+'/bin/apache/apache'+apacheVersion+'/bin/'+phpDllCopy, False);
+phpDllCopy := 'ntwdblib.dll';
+filecopy (pathWithSlashes+'/bin/php/php'+phpVersion+'/'+phpDllCopy, pathWithSlashes+'/bin/apache/apache'+apacheVersion+'/bin/'+phpDllCopy, False);
+phpDllCopy := 'php5activescript.dll';
+filecopy (pathWithSlashes+'/bin/php/php'+phpVersion+'/'+phpDllCopy, pathWithSlashes+'/bin/apache/apache'+apacheVersion+'/bin/'+phpDllCopy, False);
+phpDllCopy := 'php5isapi.dll';
+filecopy (pathWithSlashes+'/bin/php/php'+phpVersion+'/'+phpDllCopy, pathWithSlashes+'/bin/apache/apache'+apacheVersion+'/bin/'+phpDllCopy, False);
+phpDllCopy := 'php5nsapi.dll';
+filecopy (pathWithSlashes+'/bin/php/php'+phpVersion+'/'+phpDllCopy, pathWithSlashes+'/bin/apache/apache'+apacheVersion+'/bin/'+phpDllCopy, False);
+phpDllCopy := 'ssleay32.dll';
+filecopy (pathWithSlashes+'/bin/php/php'+phpVersion+'/'+phpDllCopy, pathWithSlashes+'/bin/apache/apache'+apacheVersion+'/bin/'+phpDllCopy, False);
+phpDllCopy := 'yaz.dll';
+filecopy (pathWithSlashes+'/bin/php/php'+phpVersion+'/'+phpDllCopy, pathWithSlashes+'/bin/apache/apache'+apacheVersion+'/bin/'+phpDllCopy, False);
+phpDllCopy := 'libmcrypt.dll';
+filecopy (pathWithSlashes+'/bin/php/php'+phpVersion+'/'+phpDllCopy, pathWithSlashes+'/bin/apache/apache'+apacheVersion+'/bin/'+phpDllCopy, False);
+phpDllCopy := 'php5ts.dll';
+filecopy (pathWithSlashes+'/bin/php/php'+phpVersion+'/'+phpDllCopy, pathWithSlashes+'/bin/apache/apache'+apacheVersion+'/bin/'+phpDllCopy, False);
+
+// Define pages
+
+   Page := CreateInputQueryPage(wpInstalling,
+   'Technical parameters', '',
+   'Please specify some technical parameters. If you don t understand or ' #13 'are not sure, just leave the default values.');
+
+   Page.Add('SMTP server (your own or ISP SMTP server) :', False);
+   Page.Add('Apache port:', False);
+   Page.Add('Mysql port:', False);
+   Page.Add('Mysql and dolibarr root password:', False);
+
+   // Valeurs par defaut
+   Page.Values[0] := smtpServer;
+   Page.Values[1] := apachePort;
+   Page.Values[2] := mysqlPort;
+   Page.Values[3] := newPassword;
+   
+end;
+
+
+
+
+[Run]
+; Launch Dolibarr in browser. This is run after Wizard because of postinstall flag
+Filename: "{app}\rundoliwamp.bat"; Description: "Launch Dolibarr now"; Flags: shellexec postinstall skipifsilent runhidden
+
+
+[UninstallDelete]
+Type: files; Name: "{app}\*.*"
+Type: filesandordirs; Name: "{app}\apps"
+Type: filesandordirs; Name: "{app}\bin\apache"
+Type: filesandordirs; Name: "{app}\bin\php"
+Type: filesandordirs; Name: "{app}\help"
+Type: filesandordirs; Name: "{app}\lang"
+Type: filesandordirs; Name: "{app}\logs"
+Type: filesandordirs; Name: "{app}\scripts"
+Type: filesandordirs; Name: "{app}\tmp"
+
+
+[UninstallRun]
+Filename: "{app}\uninstall_services.bat"; Flags: runhidden
+
diff --git a/build/exe/doliwamp/doliwampoff.ico b/build/exe/doliwamp/doliwampoff.ico
new file mode 100644
index 00000000000..ac2ea132a27
Binary files /dev/null and b/build/exe/doliwamp/doliwampoff.ico differ
diff --git a/build/exe/doliwamp/doliwampon.ico b/build/exe/doliwamp/doliwampon.ico
new file mode 100644
index 00000000000..9081938146b
Binary files /dev/null and b/build/exe/doliwamp/doliwampon.ico differ
diff --git a/build/exe/doliwamp/doliwampsmall.bmp b/build/exe/doliwamp/doliwampsmall.bmp
new file mode 100644
index 00000000000..ed4a71ff9f7
Binary files /dev/null and b/build/exe/doliwamp/doliwampsmall.bmp differ
diff --git a/build/exe/doliwamp/httpd.conf.install b/build/exe/doliwamp/httpd.conf.install
new file mode 100644
index 00000000000..87986eb920c
--- /dev/null
+++ b/build/exe/doliwamp/httpd.conf.install
@@ -0,0 +1,492 @@
+#
+# This is the main Apache HTTP server configuration file.  It contains the
+# configuration directives that give the server its instructions.
+# See <URL:http://httpd.apache.org/docs/2.2/> for detailed information.
+# In particular, see 
+# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
+# for a discussion of each configuration directive.
+#
+# Do NOT simply read the instructions in here without understanding
+# what they do.  They're here only as hints or reminders.  If you are unsure
+# consult the online docs. You have been warned.  
+#
+# Configuration and logfile names: If the filenames you specify for many
+# of the server's control files begin with "/" (or "drive:/" for Win32), the
+# server will use that explicit path.  If the filenames do *not* begin
+# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
+# with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2.2" will be interpreted by the
+# server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
+#
+# NOTE: Where filenames are specified, you must use forward slashes
+# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
+# If a drive letter is omitted, the drive on which Apache.exe is located
+# will be used by default.  It is recommended that you always supply
+# an explicit drive letter in absolute paths, however, to avoid
+# confusion.
+#
+
+# ThreadsPerChild: constant number of worker threads in the server process
+# MaxRequestsPerChild: maximum  number of requests a server process serves
+ThreadsPerChild 250
+MaxRequestsPerChild  0
+
+#
+# ServerRoot: The top of the directory tree under which the server's
+# configuration, error, and log files are kept.
+#
+# Do not add a slash at the end of the directory path.  If you point
+# ServerRoot at a non-local disk, be sure to point the LockFile directive
+# at a local disk.  If you wish to share the same ServerRoot for multiple
+# httpd daemons, you will need to change at least LockFile and PidFile.
+#
+ServerRoot "WAMPROOT/bin/apache/apache2.2.6"
+
+#
+# Listen: Allows you to bind Apache to specific IP addresses and/or
+# ports, instead of the default. See also the <VirtualHost>
+# directive.
+#
+# Change this to Listen on specific IP addresses as shown below to 
+# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
+#
+#Listen 12.34.56.78:80
+Listen 81
+
+#
+# Dynamic Shared Object (DSO) Support
+#
+# To be able to use the functionality of a module which was built as a DSO you
+# have to place corresponding `LoadModule' lines at this location so the
+# directives contained in it are actually available _before_ they are used.
+# Statically compiled modules (those listed by `httpd -l') do not need
+# to be loaded here.
+#
+# Example:
+# LoadModule foo_module modules/mod_foo.so
+#
+LoadModule actions_module modules/mod_actions.so
+LoadModule alias_module modules/mod_alias.so
+LoadModule asis_module modules/mod_asis.so
+LoadModule auth_basic_module modules/mod_auth_basic.so
+#LoadModule auth_digest_module modules/mod_auth_digest.so
+#LoadModule authn_anon_module modules/mod_authn_anon.so
+#LoadModule authn_dbm_module modules/mod_authn_dbm.so
+LoadModule authn_default_module modules/mod_authn_default.so
+LoadModule authn_file_module modules/mod_authn_file.so
+#LoadModule authz_dbm_module modules/mod_authz_dbm.so
+LoadModule authz_default_module modules/mod_authz_default.so
+LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
+LoadModule authz_host_module modules/mod_authz_host.so
+LoadModule authz_user_module modules/mod_authz_user.so
+LoadModule autoindex_module modules/mod_autoindex.so
+#LoadModule cern_meta_module modules/mod_cern_meta.so
+LoadModule cgi_module modules/mod_cgi.so
+#LoadModule dav_module modules/mod_dav.so
+#LoadModule dav_fs_module modules/mod_dav_fs.so
+#LoadModule deflate_module modules/mod_deflate.so
+LoadModule dir_module modules/mod_dir.so
+LoadModule env_module modules/mod_env.so
+#LoadModule expires_module modules/mod_expires.so
+#LoadModule file_cache_module modules/mod_file_cache.so
+#LoadModule headers_module modules/mod_headers.so
+LoadModule imagemap_module modules/mod_imagemap.so
+LoadModule include_module modules/mod_include.so
+#LoadModule info_module modules/mod_info.so
+LoadModule isapi_module modules/mod_isapi.so
+LoadModule log_config_module modules/mod_log_config.so
+LoadModule mime_module modules/mod_mime.so
+#LoadModule mime_magic_module modules/mod_mime_magic.so
+#LoadModule proxy_module modules/mod_proxy.so
+#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
+#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
+#LoadModule proxy_connect_module modules/mod_proxy_connect.so
+#LoadModule proxy_http_module modules/mod_proxy_http.so
+#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
+LoadModule negotiation_module modules/mod_negotiation.so
+#LoadModule rewrite_module modules/mod_rewrite.so
+LoadModule setenvif_module modules/mod_setenvif.so
+#LoadModule speling_module modules/mod_speling.so
+#LoadModule status_module modules/mod_status.so
+#LoadModule unique_id_module modules/mod_unique_id.so
+LoadModule userdir_module modules/mod_userdir.so
+#LoadModule usertrack_module modules/mod_usertrack.so
+#LoadModule vhost_alias_module modules/mod_vhost_alias.so
+#LoadModule ssl_module modules/mod_ssl.so
+LoadModule php5_module "WAMPROOT/bin/php/phpWAMPPHPVERSION/php5apache2_2.dll"
+
+# 'Main' server configuration
+#
+# The directives in this section set up the values used by the 'main'
+# server, which responds to any requests that aren't handled by a
+# <VirtualHost> definition.  These values also provide defaults for
+# any <VirtualHost> containers you may define later in the file.
+#
+# All of these directives may appear inside <VirtualHost> containers,
+# in which case these default settings will be overridden for the
+# virtual host being defined.
+#
+
+#
+# ServerAdmin: Your address, where problems with the server should be
+# e-mailed.  This address appears on some server-generated pages, such
+# as error documents.  e.g. admin@your-domain.com
+#
+ServerAdmin webmaster@localhost
+
+#
+# ServerName gives the name and port that the server uses to identify itself.
+# This can often be determined automatically, but we recommend you specify
+# it explicitly to prevent problems during startup.
+#
+# If your host doesn't have a registered DNS name, enter its IP address here.
+#
+ServerName localhost:81
+
+#
+# DocumentRoot: The directory out of which you will serve your
+# documents. By default, all requests are taken from this directory, but
+# symbolic links and aliases may be used to point to other locations.
+#
+DocumentRoot "WAMPROOT/www/"
+
+#
+# Each directory to which Apache has access can be configured with respect
+# to which services and features are allowed and/or disabled in that
+# directory (and its subdirectories). 
+#
+# First, we configure the "default" to be a very restrictive set of 
+# features.  
+#
+<Directory />
+    Options FollowSymLinks
+    AllowOverride None
+    Order deny,allow
+    Deny from all
+    Satisfy all
+</Directory>
+
+#
+# Note that from this point forward you must specifically allow
+# particular features to be enabled - so if something's not working as
+# you might expect, make sure that you have specifically enabled it
+# below.
+#
+
+#
+# This should be changed to whatever you set DocumentRoot to.
+#
+<Directory "WAMPROOT/www/">
+
+    #
+    # Possible values for the Options directive are "None", "All",
+    # or any combination of:
+    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
+    #
+    # Note that "MultiViews" must be named *explicitly* --- "Options All"
+    # doesn't give it to you.
+    #
+    # The Options directive is both complicated and important.  Please see
+    # http://httpd.apache.org/docs/2.2/mod/core.html#options
+    # for more information.
+    #
+    Options Indexes FollowSymLinks
+
+    #
+    # AllowOverride controls what directives may be placed in .htaccess files.
+    # It can be "All", "None", or any combination of the keywords:
+    #   Options FileInfo AuthConfig Limit
+    #
+    AllowOverride all
+
+    #
+    # Controls who can get stuff from this server.
+    #
+#   onlineoffline tag - don't remove
+    Order Deny,Allow
+    Deny from all
+    Allow from 127.0.0.1
+
+</Directory>
+
+#
+# DirectoryIndex: sets the file that Apache will serve if a directory
+# is requested.
+#
+<IfModule dir_module>
+    DirectoryIndex index.php index.php3 index.html index.htm
+</IfModule>
+
+#
+# The following lines prevent .htaccess and .htpasswd files from being 
+# viewed by Web clients. 
+#
+<FilesMatch "^\.ht">
+    Order allow,deny
+    Deny from all
+</FilesMatch>
+
+#
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a <VirtualHost>
+# container, error messages relating to that virtual host will be
+# logged here.  If you *do* define an error logfile for a <VirtualHost>
+# container, that host's errors will be logged there and not here.
+#
+ErrorLog "WAMPROOT/logs/apache_error.log"
+
+#
+# LogLevel: Control the number of messages logged to the error_log.
+# Possible values include: debug, info, notice, warn, error, crit,
+# alert, emerg.
+#
+LogLevel warn
+
+<IfModule log_config_module>
+    #
+    # The following directives define some format nicknames for use with
+    # a CustomLog directive (see below).
+    #
+    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
+    LogFormat "%h %l %u %t \"%r\" %>s %b" common
+
+    <IfModule logio_module>
+      # You need to enable mod_logio.c to use %I and %O
+      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
+    </IfModule>
+
+    #
+    # The location and format of the access logfile (Common Logfile Format).
+    # If you do not define any access logfiles within a <VirtualHost>
+    # container, they will be logged here.  Contrariwise, if you *do*
+    # define per-<VirtualHost> access logfiles, transactions will be
+    # logged therein and *not* in this file.
+    #
+    CustomLog "WAMPROOT/logs/access.log" common
+
+    #
+    # If you prefer a logfile with access, agent, and referer information
+    # (Combined Logfile Format) you can use the following directive.
+    #
+    #CustomLog logs/access.log combined
+</IfModule>
+
+<IfModule alias_module>
+    #
+    # Redirect: Allows you to tell clients about documents that used to 
+    # exist in your server's namespace, but do not anymore. The client 
+    # will make a new request for the document at its new location.
+    # Example:
+    # Redirect permanent /foo http://localhost/bar
+
+    #
+    # Alias: Maps web paths into filesystem paths and is used to
+    # access content that does not live under the DocumentRoot.
+    # Example:
+    # Alias /webpath /full/filesystem/path
+    #
+    # If you include a trailing / on /webpath then the server will
+    # require it to be present in the URL.  You will also likely
+    # need to provide a <Directory> section to allow access to
+    # the filesystem path.
+
+    #
+    # ScriptAlias: This controls which directories contain server scripts. 
+    # ScriptAliases are essentially the same as Aliases, except that
+    # documents in the target directory are treated as applications and
+    # run by the server when requested rather than as documents sent to the
+    # client.  The same rules about trailing "/" apply to ScriptAlias
+    # directives as to Alias.
+    #
+    ScriptAlias /cgi-bin/ "cgi-bin/"
+
+</IfModule>
+
+#
+# "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
+# CGI directory exists, if you have that configured.
+#
+<Directory "cgi-bin">
+    AllowOverride None
+    Options None
+    Order allow,deny
+    Allow from all
+</Directory>
+
+# 
+# Apache parses all CGI scripts for the shebang line by default.
+# This comment line, the first line of the script, consists of the symbols
+# pound (#) and exclamation (!) followed by the path of the program that 
+# can execute this specific script.  For a perl script, with perl.exe in
+# the C:\Program Files\Perl directory, the shebang line should be:
+
+   #!c:/program files/perl/perl
+
+# Note you _must_not_ indent the actual shebang line, and it must be the
+# first line of the file.  Of course, CGI processing must be enabled by 
+# the appropriate ScriptAlias or Options ExecCGI directives for the files 
+# or directory in question.
+#
+# However, Apache on Windows allows either the Unix behavior above, or can
+# use the Registry to match files by extention.  The command to execute 
+# a file of this type is retrieved from the registry by the same method as 
+# the Windows Explorer would use to handle double-clicking on a file.
+# These script actions can be configured from the Windows Explorer View menu, 
+# 'Folder Options', and reviewing the 'File Types' tab.  Clicking the Edit
+# button allows you to modify the Actions, of which Apache 1.3 attempts to
+# perform the 'Open' Action, and failing that it will try the shebang line.
+# This behavior is subject to change in Apache release 2.0.
+#
+# Each mechanism has it's own specific security weaknesses, from the means
+# to run a program you didn't intend the website owner to invoke, and the
+# best method is a matter of great debate.
+#
+# To enable the this Windows specific behavior (and therefore -disable- the
+# equivilant Unix behavior), uncomment the following directive:
+#
+#ScriptInterpreterSource registry
+#
+# The directive above can be placed in individual <Directory> blocks or the
+# .htaccess file, with either the 'registry' (Windows behavior) or 'script' 
+# (Unix behavior) option, and will override this server default option.
+#
+
+#
+# DefaultType: the default MIME type the server will use for a document
+# if it cannot otherwise determine one, such as from filename extensions.
+# If your server contains mostly text or HTML documents, "text/plain" is
+# a good value.  If most of your content is binary, such as applications
+# or images, you may want to use "application/octet-stream" instead to
+# keep browsers from trying to display binary files as though they are
+# text.
+#
+DefaultType text/plain
+
+<IfModule mime_module>
+    #
+    # TypesConfig points to the file containing the list of mappings from
+    # filename extension to MIME-type.
+    #
+    TypesConfig conf/mime.types
+
+    #
+    # AddType allows you to add to or override the MIME configuration
+    # file specified in TypesConfig for specific file types.
+    #
+    #AddType application/x-gzip .tgz
+    #
+    # AddEncoding allows you to have certain browsers uncompress
+    # information on the fly. Note: Not all browsers support this.
+    #
+    #AddEncoding x-compress .Z
+    #AddEncoding x-gzip .gz .tgz
+    #
+    # If the AddEncoding directives above are commented-out, then you
+    # probably should define those extensions to indicate media types:
+    #
+    AddType application/x-compress .Z
+    AddType application/x-gzip .gz .tgz
+    AddType application/x-httpd-php .php
+    AddType application/x-httpd-php .php3
+
+    #
+    # AddHandler allows you to map certain file extensions to "handlers":
+    # actions unrelated to filetype. These can be either built into the server
+    # or added with the Action directive (see below)
+    #
+    # To use CGI scripts outside of ScriptAliased directories:
+    # (You will also need to add "ExecCGI" to the "Options" directive.)
+    #
+    #AddHandler cgi-script .cgi
+
+    # For type maps (negotiated resources):
+    #AddHandler type-map var
+
+    #
+    # Filters allow you to process content before it is sent to the client.
+    #
+    # To parse .shtml files for server-side includes (SSI):
+    # (You will also need to add "Includes" to the "Options" directive.)
+    #
+    #AddType text/html .shtml
+    #AddOutputFilter INCLUDES .shtml
+</IfModule>
+
+#
+# The mod_mime_magic module allows the server to use various hints from the
+# contents of the file itself to determine its type.  The MIMEMagicFile
+# directive tells the module where the hint definitions are located.
+#
+#MIMEMagicFile conf/magic
+
+#
+# Customizable error responses come in three flavors:
+# 1) plain text 2) local redirects 3) external redirects
+#
+# Some examples:
+#ErrorDocument 500 "The server made a boo boo."
+#ErrorDocument 404 /missing.html
+#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
+#ErrorDocument 402 http://localhost/subscription_info.html
+#
+
+#
+# EnableMMAP and EnableSendfile: On systems that support it, 
+# memory-mapping or the sendfile syscall is used to deliver
+# files.  This usually improves server performance, but must
+# be turned off when serving from networked-mounted 
+# filesystems or if support for these functions is otherwise
+# broken on your system.
+#
+#EnableMMAP off
+#EnableSendfile off
+
+# Supplemental configuration
+#
+# The configuration files in the conf/extra/ directory can be 
+# included to add extra features or to modify the default configuration of 
+# the server, or you may simply copy their contents here and change as 
+# necessary.
+
+# Server-pool management (MPM specific)
+#Include conf/extra/httpd-mpm.conf
+
+# Multi-language error messages
+#Include conf/extra/httpd-multilang-errordoc.conf
+
+# Fancy directory listings
+Include conf/extra/httpd-autoindex.conf
+
+# Language settings
+#Include conf/extra/httpd-languages.conf
+
+# User home directories
+#Include conf/extra/httpd-userdir.conf
+
+# Real-time info on requests and configuration
+#Include conf/extra/httpd-info.conf
+
+# Virtual hosts
+#Include conf/extra/httpd-vhosts.conf
+
+# Local access to the Apache HTTP Server Manual
+#Include conf/extra/httpd-manual.conf
+
+# Distributed authoring and versioning (WebDAV)
+#Include conf/extra/httpd-dav.conf
+
+# Various default settings
+#Include conf/extra/httpd-default.conf
+
+# Secure (SSL/TLS) connections
+#Include conf/extra/httpd-ssl.conf
+#
+# Note: The following must must be present to support
+#       starting without SSL on platforms with no /dev/random equivalent
+#       but a statically compiled-in mod_ssl.
+#
+<IfModule ssl_module>
+SSLRandomSeed startup builtin
+SSLRandomSeed connect builtin
+</IfModule>
+
+Include "WAMPROOT/alias/*"
\ No newline at end of file
diff --git a/build/exe/doliwamp/index.php.install b/build/exe/doliwamp/index.php.install
new file mode 100644
index 00000000000..661c9098bb5
--- /dev/null
+++ b/build/exe/doliwamp/index.php.install
@@ -0,0 +1,368 @@
+<?php
+
+// Page créé par Shepard [Fabian Pijcke] <Shepard8@laposte.net>
+// Arno Esterhuizen <arno.esterhuizen@gmail.com>
+// et Romain Bourdon <romain@anaska.com>
+//  
+// icônes par Mark James <http://www.famfamfam.com/lab/icons/silk/>
+
+
+
+//chemin jusqu'aux fichiers alias
+$aliasDir = '../alias/';
+
+
+
+
+//on récpères les versions des applis
+$phpVersion = 'WAMPPHPVERSION';
+$apacheVersion = 'WAMPAPACHEVERSION';
+$mysqlVersion = 'WAMPMYSQLVERSION';
+
+
+
+// repertoires à ignorer dans les projets
+$projectsListIgnore = array ('.','..');
+
+
+// textes
+$langues = array(
+	'en' => array(
+		'langue' => 'English',
+		'autreLangue' => 'Version Fran&ccedil;aise',
+		'autreLangueLien' => 'fr',
+		'titreHtml' => 'WAMP5 Homepage',
+		'titreConf' => 'Server Configuration',
+		'versa' => 'Apache Version :',
+		'versp' => 'PHP Version :',
+		'versm' => 'MySQL Version :',
+		'phpExt' => 'Loaded Extensions : ',
+		'titrePage' => 'Tools',
+		'txtProjet' => 'Your Projects',
+		'txtNoProjet' => 'No projects yet.<br />To create a new one, just create a directory in \'www\'.',
+		'txtAlias' => 'Your Aliases',
+		'txtNoAlias' => 'No Alias yet.<br />To create a new one, use the WAMP5 menu.',
+		'faq' => 'http://www.en.wampserver.com/faq.php'
+	),
+	'fr' => array(
+		'langue' => 'Français',
+		'autreLangue' => 'English Version',
+		'autreLangueLien' => 'en',
+		'titreHtml' => 'Accueil WAMP5',
+		'titreConf' => 'Configuration Serveur',
+		'versa' => 'Version de Apache:',
+		'versp' => 'Version de PHP:',
+		'versm' => 'Version de MySQL:',
+		'phpExt' => 'Extensions Charg&eacute;es: ',
+		'titrePage' => 'Outils',
+		'txtProjet' => 'Vos Projets',
+		'txtNoProjet' => 'Aucun projet.<br /> Pour en ajouter un nouveau, cr&eacute;ez simplement un r&eacute;pertoire dans \'www\'.',
+		'txtAlias' => 'Vos Alias',
+		'txtNoAlias' => 'Aucun alias.<br /> Pour en ajouter un nouveau, utilisez le menu de WAMP5.',
+		'faq' => 'http://www.wampserver.com/faq.php'
+	)
+);
+
+
+
+// images
+$pngFolder = <<< EOFILE
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
+EOFILE;
+$pngFolderGo = <<< EOFILE
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
+EOFILE;
+$gifLogo = <<< EOFILE
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
+EOFILE;
+$pngPlugin = <<< EOFILE
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
+EOFILE;
+$pngWrench = <<< EOFILE
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
+EOFILE;
+$favicon = <<< EOFILE
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
+EOFILE;
+
+
+//affichage du phpinfo
+if (isset($_GET['phpinfo']))
+{
+	phpinfo();
+	exit();
+}
+
+
+//affichage des images
+if (isset($_GET['img']))
+{
+    switch ($_GET['img'])
+    {
+        case 'pngFolder' :
+        header("Content-type: image/png");
+        echo base64_decode($pngFolder);
+        exit();
+        
+        case 'pngFolderGo' :
+        header("Content-type: image/png");
+        echo base64_decode($pngFolderGo);
+        exit();
+        
+        case 'gifLogo' :
+        header("Content-type: image/gif");
+        echo base64_decode($gifLogo);
+        exit();
+        
+        case 'pngPlugin' :
+        header("Content-type: image/png");
+        echo base64_decode($pngPlugin);
+        exit();
+        
+        case 'pngWrench' :
+        header("Content-type: image/png");
+        echo base64_decode($pngWrench);
+        exit();
+        
+        case 'favicon' :
+        header("Content-type: image/x-icon");
+        echo base64_decode($favicon);
+        exit();
+    }
+}
+
+
+
+// Définition de la langue et des textes 
+
+if (isset ($_GET['lang']))
+{
+	$langue = $_GET['lang'];
+}
+elseif (preg_match("/^fr/", $_SERVER['HTTP_ACCEPT_LANGUAGE']))
+{
+	$langue = 'fr';
+}
+else
+{
+	$langue = 'en';
+}
+
+
+
+// recuperation des alias
+if (is_dir($aliasDir))
+{
+    $handle=opendir($aliasDir);
+    while ($file = readdir($handle)) 
+    {
+	    if (is_file($aliasDir.$file) && ereg('.conf',$file))
+	    {		
+		    $msg = '';
+		    $aliasContents .= '<li><a href="'.ereg_replace('.conf','',$file).'/">'.ereg_replace('.conf','',$file).'</a></li>';
+	    }
+    }
+    closedir($handle);
+}
+if (!isset($aliasContents))
+	$aliasContents = $langues[$langue]['txtNoAlias'];
+
+
+// recuperation des projets
+$handle=opendir(".");
+while ($file = readdir($handle)) 
+{
+	if (is_dir($file) && !in_array($file,$projectsListIgnore)) 
+	{		
+		$projectContents .= '<li><a href="'.$file.'">'.$file;
+		if ($file == 'dolibarr') $projectContents .= ' (URL=http://<i>ipofyourserver</i>/'.$file.'/)';
+		$projectContents .= '</a></li>';
+	}
+}
+closedir($handle);
+if (!isset($projectContents))
+	$projectContents = $langues[$langue]['txtNoProjet'];
+
+
+// recuperation des extensions PHP
+$loaded_extensions = get_loaded_extensions();
+foreach ($loaded_extensions as $extension)
+	$phpExtContents .= "<li>${extension}</li>";
+
+
+
+
+$pageContents = <<< EOPAGE
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN"
+	"http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
+
+<html lang="en" xml:lang="en">
+<head>
+	<title>{$langues[$langue]['titreHtml']}</title>
+	<meta http-equiv="Content-Type" content="txt/html; charset=utf-8" />
+
+	<style type="text/css">
+* {
+	margin: 0;
+	padding: 0;
+}
+
+html {
+	background: #ddd;
+}
+body {
+	margin: 1em 10%;
+	padding: 1em 3em;
+	font: 80%/1.4 tahoma, arial, helvetica, lucida sans, sans-serif;
+	border: 1px solid #999;
+	background: #eee;
+	position: relative;
+}
+#head {
+	margin-bottom: 1.8em;
+	margin-top: 1.8em;
+	padding-bottom: 0em;
+	border-bottom: 1px solid #999;
+	letter-spacing: -500em;
+	text-indent: -500em;
+	height: 125px;
+}
+.utility {
+	position: absolute;
+	right: 4em;
+	top: 145px;
+	font-size: 0.85em;
+}
+.utility li {
+	display: inline;
+}
+
+h2 {
+	margin: 0.8em 0 0 0;
+}
+
+ul {
+	list-style: none;
+	margin: 0;
+	padding: 0;
+}
+#head ul li, dl ul li, #foot li {
+	list-style: none;
+	display: inline;
+	margin: 0;
+	padding: 0 0.2em;
+	background: url(index.php?img=gifLogo) 0 0 no-repeat;
+}
+ul.aliases, ul.projects, ul.tools {
+	list-style: none;
+	line-height: 24px;
+}
+ul.aliases a, ul.projects a, ul.tools a {
+	padding-left: 22px;
+	background: url(index.php?img=pngFolder) 0 100% no-repeat;
+}
+ul.tools a {
+	background: url(index.php?img=pngWrench) 0 100% no-repeat;
+}
+ul.aliases a {
+	background: url(index.php?img=pngFolderGo) 0 100% no-repeat;
+}
+dl {
+	margin: 0;
+	padding: 0;
+}
+dt {
+	font-weight: bold;
+	text-align: right;
+	width: 11em;
+	clear: both;
+}
+dd {
+	margin: -1.35em 0 0 12em;
+	padding-bottom: 0.4em;
+	overflow: auto;
+}
+dd ul li {
+	float: left;
+	display: block;
+	width: 16.5%;
+	margin: 0;
+	padding: 0 0 0 20px;
+	background: url(index.php?img=pngPlugin) 2px 50% no-repeat;
+	line-height: 1.6;
+}
+a {
+	color: #024378;
+	font-weight: bold;
+	text-decoration: none;
+}
+a:hover {
+	color: #04569A;
+	text-decoration: underline;
+}
+#foot {
+	text-align: center;
+	margin-top: 1.8em;
+	border-top: 1px solid #999;
+	padding-top: 1em;
+	font-size: 0.85em;
+}
+</style>
+    
+	<link rel="shortcut icon" href="index.php?img=favicon" type="image/ico" />
+</head>
+
+<body>
+	<div id="head">
+		<h1><abbr title="Windows">W</abbr><abbr title="Apache">A</abbr><abbr title="MySQL">M</abbr><abbr title="PHP">P</abbr></h1>
+		<ul>
+			<li>PHP 5</li>
+			<li>Apache 2</li>
+			<li>MySQL 5</li>
+		</ul>
+	</div>
+
+	<ul class="utility">
+		<li>Version ${wampserverVersion}</li>
+		<li><a href="?lang={$langues[$langue]['autreLangueLien']}">{$langues[$langue]['autreLangue']}</a></li>
+	</ul>
+
+	<h2> {$langues[$langue]['titreConf']} </h2>
+
+	<dl class="content">
+		<dt>{$langues[$langue]['versa']}</dt>
+		<dd>${apacheVersion} &nbsp;</dd>
+		<dt>{$langues[$langue]['versp']}</dt>
+		<dd>${phpVersion} &nbsp;</dd>
+		<dt>{$langues[$langue]['phpExt']}</dt> 
+		<dd>
+			<ul>
+			${phpExtContents}
+			</ul>
+		</dd>
+		<dt>{$langues[$langue]['versm']}</dt>
+		<dd>${mysqlVersion} &nbsp;</dd>
+	</dl>
+	<h2>{$langues[$langue]['titrePage']}</h2>
+	<ul class="tools">
+		<li><a href="?phpinfo=1">phpinfo()</a></li>
+		<li><a href="phpmyadmin/index.php">phpmyadmin</a></li>
+	</ul>
+	<h2>{$langues[$langue]['txtProjet']}</h2>
+	<ul class="projects">
+	$projectContents
+	</ul>
+	<h2>{$langues[$langue]['txtAlias']}</h2>
+	<ul class="aliases">
+	${aliasContents}			
+	</ul>
+	<ul id="foot">
+		<li>DoliWamp inspired by WampServer from Anaska</li>
+	</ul>
+</body>
+</html>
+EOPAGE;
+
+echo $pageContents;
+?>
\ No newline at end of file
diff --git a/build/exe/doliwamp/install_services.bat.install b/build/exe/doliwamp/install_services.bat.install
new file mode 100644
index 00000000000..e0e8310c15f
--- /dev/null
+++ b/build/exe/doliwamp/install_services.bat.install
@@ -0,0 +1,7 @@
+@echo off
+REM NET STOP doliwampapache
+REM NET STOP doliwampmysqld 
+.\bin\apache\apacheWAMPAPACHEVERSION\bin\httpd.exe -k install -n doliwampapache
+REM reg add HKLM\SYSTEM\CurrentControlSet\Services\doliwampapache /V Start /t REG_DWORD /d 3 /f
+REM .\bin\mysql\mysqlWAMPMYSQLVERSION\bin\mysqld-nt.exe --install-manual doliwampmysqld
+.\bin\mysql\mysqlWAMPMYSQLVERSION\bin\mysqld-nt.exe --install doliwampmysqld
diff --git a/build/exe/doliwamp/my.ini.install b/build/exe/doliwamp/my.ini.install
new file mode 100644
index 00000000000..4aee48fa8da
--- /dev/null
+++ b/build/exe/doliwamp/my.ini.install
@@ -0,0 +1,219 @@
+# MySQL Server Instance Configuration File
+# ----------------------------------------------------------------------
+# Generated by the MySQL Server Instance Configuration Wizard
+#
+#
+# Installation Instructions
+# ----------------------------------------------------------------------
+#
+# On Linux you can copy this file to /etc/my.cnf to set global options,
+# mysql-data-dir/my.cnf to set server-specific options
+# (@localstatedir@ for this installation) or to
+# ~/.my.cnf to set user-specific options.
+#
+# On Windows you should keep this file in the installation directory 
+# of your server (e.g. C:\Program Files\MySQL\MySQL Server 4.1). To
+# make sure the server reads the config file use the startup option 
+# "--defaults-file". 
+#
+# To run run the server from the command line, execute this in a 
+# command line shell, e.g.
+# mysqld --defaults-file="C:\Program Files\MySQL\MySQL Server 4.1\my.ini"
+#
+# To install the server as a Windows service manually, execute this in a 
+# command line shell, e.g.
+# mysqld --install MySQL41 --defaults-file="C:\Program Files\MySQL\MySQL Server 4.1\my.ini"
+#
+# And then execute this in a command line shell to start the server, e.g.
+# net start MySQL41
+#
+#
+# Guildlines for editing this file
+# ----------------------------------------------------------------------
+#
+# In this file, you can use all long options that the program supports.
+# If you want to know the options a program supports, start the program
+# with the "--help" option.
+#
+# More detailed information about the individual options can also be
+# found in the manual.
+#
+#
+# CLIENT SECTION
+# ----------------------------------------------------------------------
+#
+# The following options will be read by MySQL client applications.
+# Note that only client applications shipped by MySQL are guaranteed
+# to read this section. If you want your own MySQL client program to
+# honor these values, you need to specify it as an option during the
+# MySQL client library initialization.
+#
+[client]
+
+port=3307
+
+
+# SERVER SECTION
+# ----------------------------------------------------------------------
+#
+# The following options will be read by the MySQL Server. Make sure that
+# you have installed the server correctly (see above) so it reads this 
+# file.
+#
+[doliwampmysqld]
+
+# The TCP/IP Port the MySQL Server will listen on
+port=3307
+
+
+#Path to installation directory. All paths are usually resolved relative to this.
+basedir=WAMPROOT/bin/mysql/mysql5.0.45
+
+#log file
+log-error=WAMPROOT/logs/mysql.log
+
+#Path to the database root
+datadir=WAMPROOT/bin/mysql/mysql5.0.45/data
+
+# The default character set that will be used when a new schema or table is
+# created and no character set is defined
+default-character-set=latin1
+
+# The default storage engine that will be used when create new tables when
+default-storage-engine=INNODB
+
+# The maximum amount of concurrent sessions the MySQL server will
+# allow. One of these connections will be reserved for a user with
+# SUPER privileges to allow the administrator to login even if the
+# connection limit has been reached.
+max_connections=255
+
+# Query cache is used to cache SELECT results and later return them
+# without actual executing the same query once again. Having the query
+# cache enabled may result in significant speed improvements, if your
+# have a lot of identical queries and rarely changing tables. See the
+# "Qcache_lowmem_prunes" status variable to check if the current value
+# is high enough for your load.
+# Note: In case your tables change very often or if your queries are
+# textually different every time, the query cache may result in a
+# slowdown instead of a performance improvement.
+query_cache_size=8M
+
+# The number of open tables for all threads. Increasing this value
+# increases the number of file descriptors that mysqld requires.
+# Therefore you have to make sure to set the amount of open files
+# allowed to at least 4096 in the variable "open-files-limit" in
+# section [mysqld_safe]
+table_cache=510
+
+# Maximum size for internal (in-memory) temporary tables. If a table
+# grows larger than this value, it is automatically converted to disk
+# based table This limitation is for a single table. There can be many
+# of them.
+tmp_table_size=13M
+
+
+# How many threads we should keep in a cache for reuse. When a client
+# disconnects, the client's threads are put in the cache if there aren't
+# more than thread_cache_size threads from before.  This greatly reduces
+# the amount of thread creations needed if you have a lot of new
+# connections. (Normally this doesn't give a notable performance
+# improvement if you have a good thread implementation.)
+thread_cache_size=12
+
+#*** MyISAM Specific options
+
+# The maximum size of the temporary file MySQL is allowed to use while
+# recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE.
+# If the file-size would be bigger than this, the index will be created
+# through the key cache (which is slower).
+myisam_max_sort_file_size=100G
+
+# If the temporary file used for fast index creation would be bigger
+# than using the key cache by the amount specified here, then prefer the
+# key cache method.  This is mainly used to force long character keys in
+# large tables to use the slower key cache method to create the index.
+myisam_max_extra_sort_file_size=100G
+
+# If the temporary file used for fast index creation would be bigger
+# than using the key cache by the amount specified here, then prefer the
+# key cache method.  This is mainly used to force long character keys in
+# large tables to use the slower key cache method to create the index.
+myisam_sort_buffer_size=8M
+
+# Size of the Key Buffer, used to cache index blocks for MyISAM tables.
+# Do not set it larger than 30% of your available memory, as some memory
+# is also required by the OS to cache rows. Even if you're not using
+# MyISAM tables, you should still set it to 8-64M as it will also be
+# used for internal temporary disk tables.
+key_buffer_size=9M
+
+# Size of the buffer used for doing full table scans of MyISAM tables.
+# Allocated per thread, if a full scan is needed.
+read_buffer_size=64K
+read_rnd_buffer_size=256K
+
+# This buffer is allocated when MySQL needs to rebuild the index in
+# REPAIR, OPTIMZE, ALTER table statements as well as in LOAD DATA INFILE
+# into an empty table. It is allocated per thread so be careful with
+# large settings.
+sort_buffer_size=203K
+
+
+#*** INNODB Specific options ***
+
+
+# Use this option if you have a MySQL server with InnoDB support enabled
+# but you do not plan to use it. This will save memory and disk space
+# and speed up some things.
+#skip-innodb
+
+# Additional memory pool that is used by InnoDB to store metadata
+# information.  If InnoDB requires more memory for this purpose it will
+# start to allocate it from the OS.  As this is fast enough on most
+# recent operating systems, you normally do not need to change this
+# value. SHOW INNODB STATUS will display the current amount used.
+innodb_additional_mem_pool_size=2M
+
+# If set to 1, InnoDB will flush (fsync) the transaction logs to the
+# disk at each commit, which offers full ACID behavior. If you are
+# willing to compromise this safety, and you are running small
+# transactions, you may set this to 0 or 2 to reduce disk I/O to the
+# logs. Value 0 means that the log is only written to the log file and
+# the log file flushed to disk approximately once per second. Value 2
+# means the log is written to the log file at each commit, but the log
+# file is only flushed to disk approximately once per second.
+innodb_flush_log_at_trx_commit=1
+
+# The size of the buffer InnoDB uses for buffering log data. As soon as
+# it is full, InnoDB will have to flush it to disk. As it is flushed
+# once per second anyway, it does not make sense to have it very large
+# (even with long transactions).
+innodb_log_buffer_size=1M
+
+# InnoDB, unlike MyISAM, uses a buffer pool to cache both indexes and
+# row data. The bigger you set this the less disk I/O is needed to
+# access data in tables. On a dedicated database server you may set this
+# parameter up to 80% of the machine physical memory size. Do not set it
+# too large, though, because competition of the physical memory may
+# cause paging in the operating system.  Note that on 32bit systems you
+# might be limited to 2-3.5G of user level memory per process, so do not
+# set it too high.
+innodb_buffer_pool_size=15M
+
+# Size of each log file in a log group. You should set the combined size
+# of log files to about 25%-100% of your buffer pool size to avoid
+# unneeded buffer pool flush activity on log file overwrite. However,
+# note that a larger logfile size will increase the time needed for the
+# recovery process.
+innodb_log_file_size=10M
+
+# Number of threads allowed inside the InnoDB kernel. The optimal value
+# depends highly on the application, hardware as well as the OS
+# scheduler properties. A too high value may lead to thread thrashing.
+innodb_thread_concurrency=8
+
+
+
+[mysqld]
+port=3307
\ No newline at end of file
diff --git a/build/exe/doliwamp/mysql/columns_priv.MYD b/build/exe/doliwamp/mysql/columns_priv.MYD
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/build/exe/doliwamp/mysql/columns_priv.MYI b/build/exe/doliwamp/mysql/columns_priv.MYI
new file mode 100644
index 00000000000..f1a20aacb4b
Binary files /dev/null and b/build/exe/doliwamp/mysql/columns_priv.MYI differ
diff --git a/build/exe/doliwamp/mysql/columns_priv.frm b/build/exe/doliwamp/mysql/columns_priv.frm
new file mode 100644
index 00000000000..6b12fc174c2
Binary files /dev/null and b/build/exe/doliwamp/mysql/columns_priv.frm differ
diff --git a/build/exe/doliwamp/mysql/db.MYD b/build/exe/doliwamp/mysql/db.MYD
new file mode 100644
index 00000000000..8d671b07393
Binary files /dev/null and b/build/exe/doliwamp/mysql/db.MYD differ
diff --git a/build/exe/doliwamp/mysql/db.MYI b/build/exe/doliwamp/mysql/db.MYI
new file mode 100644
index 00000000000..d4a1de9c34d
Binary files /dev/null and b/build/exe/doliwamp/mysql/db.MYI differ
diff --git a/build/exe/doliwamp/mysql/db.frm b/build/exe/doliwamp/mysql/db.frm
new file mode 100644
index 00000000000..a8cab8f1fcd
Binary files /dev/null and b/build/exe/doliwamp/mysql/db.frm differ
diff --git a/build/exe/doliwamp/mysql/func.MYD b/build/exe/doliwamp/mysql/func.MYD
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/build/exe/doliwamp/mysql/func.MYI b/build/exe/doliwamp/mysql/func.MYI
new file mode 100644
index 00000000000..cbfe35c310e
Binary files /dev/null and b/build/exe/doliwamp/mysql/func.MYI differ
diff --git a/build/exe/doliwamp/mysql/func.frm b/build/exe/doliwamp/mysql/func.frm
new file mode 100644
index 00000000000..d572065cbd8
Binary files /dev/null and b/build/exe/doliwamp/mysql/func.frm differ
diff --git a/build/exe/doliwamp/mysql/help_category.MYD b/build/exe/doliwamp/mysql/help_category.MYD
new file mode 100644
index 00000000000..d3ffdd47d9a
Binary files /dev/null and b/build/exe/doliwamp/mysql/help_category.MYD differ
diff --git a/build/exe/doliwamp/mysql/help_category.MYI b/build/exe/doliwamp/mysql/help_category.MYI
new file mode 100644
index 00000000000..1827cfaa604
Binary files /dev/null and b/build/exe/doliwamp/mysql/help_category.MYI differ
diff --git a/build/exe/doliwamp/mysql/help_category.frm b/build/exe/doliwamp/mysql/help_category.frm
new file mode 100644
index 00000000000..f97bae288e6
Binary files /dev/null and b/build/exe/doliwamp/mysql/help_category.frm differ
diff --git a/build/exe/doliwamp/mysql/help_keyword.MYD b/build/exe/doliwamp/mysql/help_keyword.MYD
new file mode 100644
index 00000000000..ec02aeb4876
Binary files /dev/null and b/build/exe/doliwamp/mysql/help_keyword.MYD differ
diff --git a/build/exe/doliwamp/mysql/help_keyword.MYI b/build/exe/doliwamp/mysql/help_keyword.MYI
new file mode 100644
index 00000000000..8c5a7a6359b
Binary files /dev/null and b/build/exe/doliwamp/mysql/help_keyword.MYI differ
diff --git a/build/exe/doliwamp/mysql/help_keyword.frm b/build/exe/doliwamp/mysql/help_keyword.frm
new file mode 100644
index 00000000000..2fb3b009667
Binary files /dev/null and b/build/exe/doliwamp/mysql/help_keyword.frm differ
diff --git a/build/exe/doliwamp/mysql/help_relation.MYD b/build/exe/doliwamp/mysql/help_relation.MYD
new file mode 100644
index 00000000000..493c37c9c19
Binary files /dev/null and b/build/exe/doliwamp/mysql/help_relation.MYD differ
diff --git a/build/exe/doliwamp/mysql/help_relation.MYI b/build/exe/doliwamp/mysql/help_relation.MYI
new file mode 100644
index 00000000000..ecb69cc0360
Binary files /dev/null and b/build/exe/doliwamp/mysql/help_relation.MYI differ
diff --git a/build/exe/doliwamp/mysql/help_relation.frm b/build/exe/doliwamp/mysql/help_relation.frm
new file mode 100644
index 00000000000..8ddfdddc71e
Binary files /dev/null and b/build/exe/doliwamp/mysql/help_relation.frm differ
diff --git a/build/exe/doliwamp/mysql/help_topic.MYD b/build/exe/doliwamp/mysql/help_topic.MYD
new file mode 100644
index 00000000000..3b660b25496
Binary files /dev/null and b/build/exe/doliwamp/mysql/help_topic.MYD differ
diff --git a/build/exe/doliwamp/mysql/help_topic.MYI b/build/exe/doliwamp/mysql/help_topic.MYI
new file mode 100644
index 00000000000..7a727366752
Binary files /dev/null and b/build/exe/doliwamp/mysql/help_topic.MYI differ
diff --git a/build/exe/doliwamp/mysql/help_topic.frm b/build/exe/doliwamp/mysql/help_topic.frm
new file mode 100644
index 00000000000..a09a2c3b590
Binary files /dev/null and b/build/exe/doliwamp/mysql/help_topic.frm differ
diff --git a/build/exe/doliwamp/mysql/host.MYD b/build/exe/doliwamp/mysql/host.MYD
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/build/exe/doliwamp/mysql/host.MYI b/build/exe/doliwamp/mysql/host.MYI
new file mode 100644
index 00000000000..f0cbeb6258c
Binary files /dev/null and b/build/exe/doliwamp/mysql/host.MYI differ
diff --git a/build/exe/doliwamp/mysql/host.frm b/build/exe/doliwamp/mysql/host.frm
new file mode 100644
index 00000000000..dbafa8d2b90
Binary files /dev/null and b/build/exe/doliwamp/mysql/host.frm differ
diff --git a/build/exe/doliwamp/mysql/proc.MYD b/build/exe/doliwamp/mysql/proc.MYD
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/build/exe/doliwamp/mysql/proc.MYI b/build/exe/doliwamp/mysql/proc.MYI
new file mode 100644
index 00000000000..a843a2efda1
Binary files /dev/null and b/build/exe/doliwamp/mysql/proc.MYI differ
diff --git a/build/exe/doliwamp/mysql/proc.frm b/build/exe/doliwamp/mysql/proc.frm
new file mode 100644
index 00000000000..32b9b0e2eda
Binary files /dev/null and b/build/exe/doliwamp/mysql/proc.frm differ
diff --git a/build/exe/doliwamp/mysql/procs_priv.MYD b/build/exe/doliwamp/mysql/procs_priv.MYD
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/build/exe/doliwamp/mysql/procs_priv.MYI b/build/exe/doliwamp/mysql/procs_priv.MYI
new file mode 100644
index 00000000000..a7f955241e1
Binary files /dev/null and b/build/exe/doliwamp/mysql/procs_priv.MYI differ
diff --git a/build/exe/doliwamp/mysql/procs_priv.frm b/build/exe/doliwamp/mysql/procs_priv.frm
new file mode 100644
index 00000000000..b2cd3f50ef2
Binary files /dev/null and b/build/exe/doliwamp/mysql/procs_priv.frm differ
diff --git a/build/exe/doliwamp/mysql/tables_priv.MYD b/build/exe/doliwamp/mysql/tables_priv.MYD
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/build/exe/doliwamp/mysql/tables_priv.MYI b/build/exe/doliwamp/mysql/tables_priv.MYI
new file mode 100644
index 00000000000..6a2409ff79a
Binary files /dev/null and b/build/exe/doliwamp/mysql/tables_priv.MYI differ
diff --git a/build/exe/doliwamp/mysql/tables_priv.frm b/build/exe/doliwamp/mysql/tables_priv.frm
new file mode 100644
index 00000000000..4afbd02da2d
Binary files /dev/null and b/build/exe/doliwamp/mysql/tables_priv.frm differ
diff --git a/build/exe/doliwamp/mysql/time_zone.MYD b/build/exe/doliwamp/mysql/time_zone.MYD
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/build/exe/doliwamp/mysql/time_zone.MYI b/build/exe/doliwamp/mysql/time_zone.MYI
new file mode 100644
index 00000000000..68053049224
Binary files /dev/null and b/build/exe/doliwamp/mysql/time_zone.MYI differ
diff --git a/build/exe/doliwamp/mysql/time_zone.frm b/build/exe/doliwamp/mysql/time_zone.frm
new file mode 100644
index 00000000000..8391df0107e
Binary files /dev/null and b/build/exe/doliwamp/mysql/time_zone.frm differ
diff --git a/build/exe/doliwamp/mysql/time_zone_leap_second.MYD b/build/exe/doliwamp/mysql/time_zone_leap_second.MYD
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/build/exe/doliwamp/mysql/time_zone_leap_second.MYI b/build/exe/doliwamp/mysql/time_zone_leap_second.MYI
new file mode 100644
index 00000000000..e41863b0448
Binary files /dev/null and b/build/exe/doliwamp/mysql/time_zone_leap_second.MYI differ
diff --git a/build/exe/doliwamp/mysql/time_zone_leap_second.frm b/build/exe/doliwamp/mysql/time_zone_leap_second.frm
new file mode 100644
index 00000000000..90bb6cda6df
Binary files /dev/null and b/build/exe/doliwamp/mysql/time_zone_leap_second.frm differ
diff --git a/build/exe/doliwamp/mysql/time_zone_name.MYD b/build/exe/doliwamp/mysql/time_zone_name.MYD
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/build/exe/doliwamp/mysql/time_zone_name.MYI b/build/exe/doliwamp/mysql/time_zone_name.MYI
new file mode 100644
index 00000000000..e13615ccdef
Binary files /dev/null and b/build/exe/doliwamp/mysql/time_zone_name.MYI differ
diff --git a/build/exe/doliwamp/mysql/time_zone_name.frm b/build/exe/doliwamp/mysql/time_zone_name.frm
new file mode 100644
index 00000000000..a1515da6890
Binary files /dev/null and b/build/exe/doliwamp/mysql/time_zone_name.frm differ
diff --git a/build/exe/doliwamp/mysql/time_zone_transition.MYD b/build/exe/doliwamp/mysql/time_zone_transition.MYD
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/build/exe/doliwamp/mysql/time_zone_transition.MYI b/build/exe/doliwamp/mysql/time_zone_transition.MYI
new file mode 100644
index 00000000000..f28e4cec8d2
Binary files /dev/null and b/build/exe/doliwamp/mysql/time_zone_transition.MYI differ
diff --git a/build/exe/doliwamp/mysql/time_zone_transition.frm b/build/exe/doliwamp/mysql/time_zone_transition.frm
new file mode 100644
index 00000000000..52e2d1da633
Binary files /dev/null and b/build/exe/doliwamp/mysql/time_zone_transition.frm differ
diff --git a/build/exe/doliwamp/mysql/time_zone_transition_type.MYD b/build/exe/doliwamp/mysql/time_zone_transition_type.MYD
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/build/exe/doliwamp/mysql/time_zone_transition_type.MYI b/build/exe/doliwamp/mysql/time_zone_transition_type.MYI
new file mode 100644
index 00000000000..2f7e0c7127d
Binary files /dev/null and b/build/exe/doliwamp/mysql/time_zone_transition_type.MYI differ
diff --git a/build/exe/doliwamp/mysql/time_zone_transition_type.frm b/build/exe/doliwamp/mysql/time_zone_transition_type.frm
new file mode 100644
index 00000000000..cee25730d40
Binary files /dev/null and b/build/exe/doliwamp/mysql/time_zone_transition_type.frm differ
diff --git a/build/exe/doliwamp/mysql/user.MYD b/build/exe/doliwamp/mysql/user.MYD
new file mode 100644
index 00000000000..cc6e51fe7dd
Binary files /dev/null and b/build/exe/doliwamp/mysql/user.MYD differ
diff --git a/build/exe/doliwamp/mysql/user.MYI b/build/exe/doliwamp/mysql/user.MYI
new file mode 100644
index 00000000000..7ba895cda06
Binary files /dev/null and b/build/exe/doliwamp/mysql/user.MYI differ
diff --git a/build/exe/doliwamp/mysql/user.frm b/build/exe/doliwamp/mysql/user.frm
new file mode 100644
index 00000000000..ef5c451c7f3
Binary files /dev/null and b/build/exe/doliwamp/mysql/user.frm differ
diff --git a/build/exe/doliwamp/mysqlinitpassword.bat.install b/build/exe/doliwamp/mysqlinitpassword.bat.install
new file mode 100644
index 00000000000..d4639a28872
--- /dev/null
+++ b/build/exe/doliwamp/mysqlinitpassword.bat.install
@@ -0,0 +1 @@
+.\bin\mysql\mysqlWAMPMYSQLVERSION\bin\mysqladmin -u root password WAMPMYSQLNEWPASSWORD
\ No newline at end of file
diff --git a/build/exe/doliwamp/php.ini.install b/build/exe/doliwamp/php.ini.install
new file mode 100644
index 00000000000..bcaed00eeb3
--- /dev/null
+++ b/build/exe/doliwamp/php.ini.install
@@ -0,0 +1,1335 @@
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini   ;
+;;;;;;;;;;;;;;;;;;;
+; This file controls many aspects of PHP's behavior.  In order for PHP to
+; read it, it must be named 'php.ini'.  PHP looks for it in the current
+; working directory, in the path designated by the environment variable
+; PHPRC, and in the path that was defined in compile time (in that order).
+; Under Windows, the compile-time path is the Windows directory.  The
+; path in which the php.ini file is looked for can be overridden using
+; the -c argument in command line mode.
+;
+; The syntax of the file is extremely simple.  Whitespace and Lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+;
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+;
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
+;
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; |        bitwise OR
+; &        bitwise AND
+; ~        bitwise NOT
+; !        boolean NOT
+;
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+;
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+;
+;  foo =         ; sets foo to an empty string
+;  foo = none    ; sets foo to an empty string
+;  foo = "none"  ; sets foo to the string 'none'
+;
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+; 
+;
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; This is the recommended, PHP 5-style version of the php.ini-dist file.  It
+; sets some non standard settings, that make PHP more efficient, more secure,
+; and encourage cleaner coding.
+;
+; The price is that with these settings, PHP may be incompatible with some
+; applications, and sometimes, more difficult to develop with.  Using this
+; file is warmly recommended for production sites.  As all of the changes from
+; the standard settings are thoroughly documented, you can go over each one,
+; and decide whether you want to use it or not.
+;
+; For general information about the php.ini file, please consult the php.ini-dist
+; file, included in your PHP distribution.
+;
+; This file is different from the php.ini-dist file in the fact that it features
+; different values for several directives, in order to improve performance, while
+; possibly breaking compatibility with the standard out-of-the-box behavior of
+; PHP.  Please make sure you read what's different, and modify your scripts
+; accordingly, if you decide to use this file instead.
+;
+; - register_long_arrays = Off     [Performance]
+;     Disables registration of the older (and deprecated) long predefined array
+;     variables ($HTTP_*_VARS).  Instead, use the superglobals that were
+;     introduced in PHP 4.1.0
+; - display_errors = Off           [Security]
+;     With this directive set to off, errors that occur during the execution of
+;     scripts will no longer be displayed as a part of the script output, and thus,
+;     will no longer be exposed to remote users.  With some errors, the error message
+;     content may expose information about your script, web server, or database
+;     server that may be exploitable for hacking.  Production sites should have this
+;     directive set to off.
+; - log_errors = On                [Security]
+;     This directive complements the above one.  Any errors that occur during the
+;     execution of your script will be logged (typically, to your server's error log,
+;     but can be configured in several ways).  Along with setting display_errors to off,
+;     this setup gives you the ability to fully understand what may have gone wrong,
+;     without exposing any sensitive information to remote users.
+; - output_buffering = 4096        [Performance]
+;     Set a 4KB output buffer.  Enabling output buffering typically results in less
+;     writes, and sometimes less packets sent on the wire, which can often lead to
+;     better performance.  The gain this directive actually yields greatly depends
+;     on which Web server you're working with, and what kind of scripts you're using.
+; - register_argc_argv = Off       [Performance]
+;     Disables registration of the somewhat redundant $argv and $argc global
+;     variables.
+; - magic_quotes_gpc = Off         [Performance]
+;     Input data is no longer escaped with slashes so that it can be sent into
+;     SQL databases without further manipulation.  Instead, you should use the
+;     function addslashes() on each input element you wish to send to a database.
+; - variables_order = "GPCS"       [Performance]
+;     The environment variables are not hashed into the $_ENV.  To access
+;     environment variables, you can use getenv() instead.
+; - error_reporting = E_ALL        [Code Cleanliness, Security(?)]
+;     By default, PHP suppresses errors of type E_NOTICE.  These error messages
+;     are emitted for non-critical errors, but that could be a symptom of a bigger
+;     problem.  Most notably, this will cause error messages about the use
+;     of uninitialized variables to be displayed.
+; - allow_call_time_pass_reference = Off     [Code cleanliness]
+;     It's not possible to decide to force a variable to be passed by reference
+;     when calling a function.  The PHP 4 style to do this is by making the
+;     function require the relevant argument by reference.
+; - short_open_tag = Off           [Portability]
+;     Using short tags is discouraged when developing code meant for redistribution
+;     since short tags may not be supported on the target server.
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+engine = On
+
+; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
+zend.ze1_compatibility_mode = Off
+
+; Allow the <? tag.  Otherwise, only <?php and <script> tags are recognized.
+; NOTE: Using short tags should be avoided when developing applications or
+; libraries that are meant for redistribution, or deployment on PHP
+; servers which are not under your control, because short tags may not
+; be supported on the target server. For portable, redistributable code,
+; be sure not to use short tags.
+short_open_tag = Off
+
+; Allow ASP-style <% %> tags.
+asp_tags = Off
+
+; The number of significant digits displayed in floating point numbers.
+precision    =  14
+
+; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
+y2k_compliance = On
+
+; Output buffering allows you to send header lines (including cookies) even
+; after you send body content, at the price of slowing PHP's output layer a
+; bit.  You can enable output buffering during runtime by calling the output
+; buffering functions.  You can also enable output buffering for all files by
+; setting this directive to On.  If you wish to limit the size of the buffer
+; to a certain size - you can use a maximum number of bytes instead of 'On', as
+; a value for this directive (e.g., output_buffering=4096).
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function.  For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+;       directive. Instead, explicitly set the output handler using ob_start().
+;       Using this ini directive may cause problems unless you know what script
+;       is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+;       and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+;       Instead you must use zlib.output_handler.
+;output_handler =
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+;       outputs chunks that are few hundreds bytes each as a result of
+;       compression. If you prefer a larger chunk size for better
+;       performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+;       output_handler, or otherwise the output will be corrupted.
+zlib.output_compression = Off
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block.  This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block.  Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated.
+; A warning appears if the specified function is not defined, or if the
+; function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func=
+
+; When floats & doubles are serialized store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+serialize_precision = 100
+
+; Whether to enable the ability to force arguments to be passed by reference
+; at function call time.  This method is deprecated and is likely to be
+; unsupported in future versions of PHP/Zend.  The encouraged method of
+; specifying which arguments should be passed by reference is in the function
+; declaration.  You're encouraged to try and turn this option Off and make
+; sure your scripts work properly with it in order to ensure they will work
+; with future versions of the language (you will receive a warning each time
+; you use this feature, and the argument will be passed by value instead of by
+; reference).
+allow_call_time_pass_reference = Off
+
+;
+; Safe Mode
+;
+safe_mode = Off
+
+; By default, Safe Mode does a UID compare check when
+; opening files. If you want to relax this to a GID compare,
+; then turn on safe_mode_gid.
+safe_mode_gid = Off
+
+; When safe_mode is on, UID/GID checks are bypassed when
+; including files from this directory and its subdirectories.
+; (directory must also be in include_path or full path must
+; be used when including)
+safe_mode_include_dir =
+
+; When safe_mode is on, only executables located in the safe_mode_exec_dir
+; will be allowed to be executed via the exec family of functions.
+safe_mode_exec_dir =
+
+; Setting certain environment variables may be a potential security breach.
+; This directive contains a comma-delimited list of prefixes.  In Safe Mode,
+; the user may only alter environment variables whose names begin with the
+; prefixes supplied here.  By default, users will only be able to set
+; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
+;
+; Note:  If this directive is empty, PHP will let the user modify ANY
+; environment variable!
+safe_mode_allowed_env_vars = PHP_
+
+; This directive contains a comma-delimited list of environment variables that
+; the end user won't be able to change using putenv().  These variables will be
+; protected even if safe_mode_allowed_env_vars is set to allow to change them.
+safe_mode_protected_env_vars = LD_LIBRARY_PATH
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below.  This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+;open_basedir =
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+disable_functions =
+
+; This directive allows you to disable certain classes for security reasons.
+; It receives a comma-delimited list of class names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+disable_classes =
+
+; Colors for Syntax Highlighting mode.  Anything that's acceptable in
+; <span style="color: ???????"> would work.
+;highlight.string  = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.bg      = #FFFFFF
+;highlight.default = #0000BB
+;highlight.html    = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long request, which may end up
+; being interrupted by the user or a browser timing out.
+; ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; realpath_cache_size=16k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; realpath_cache_ttl=120
+
+;
+; Misc
+;
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header).  It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+expose_php = On
+
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+max_execution_time = 30     ; Maximum execution time of each script, in seconds
+max_input_time = 60	; Maximum amount of time each script may spend parsing request data
+;max_input_nesting_level = 64 ; Maximum input variable nesting level
+memory_limit = 128M      ; Maximum amount of memory a script may consume (128MB)
+
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; error_reporting is a bit-field.  Or each number up to get desired error
+; reporting level
+; E_ALL             - All errors and warnings (doesn't include E_STRICT)
+; E_ERROR           - fatal run-time errors
+; E_RECOVERABLE_ERROR  - almost fatal run-time errors
+; E_WARNING         - run-time warnings (non-fatal errors)
+; E_PARSE           - compile-time parse errors
+; E_NOTICE          - run-time notices (these are warnings which often result
+;                     from a bug in your code, but it's possible that it was
+;                     intentional (e.g., using an uninitialized variable and
+;                     relying on the fact it's automatically initialized to an
+;                     empty string)
+; E_STRICT          - run-time notices, enable to have PHP suggest changes
+;                     to your code which will ensure the best interoperability
+;                     and forward compatibility of your code
+; E_CORE_ERROR      - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING    - warnings (non-fatal errors) that occur during PHP's
+;                     initial startup
+; E_COMPILE_ERROR   - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR      - user-generated error message
+; E_USER_WARNING    - user-generated warning message
+; E_USER_NOTICE     - user-generated notice message
+;
+; Examples:
+;
+;   - Show all errors, except for notices and coding standards warnings
+;
+;error_reporting = E_ALL & ~E_NOTICE
+;
+;   - Show all errors, except for notices
+;
+;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
+;
+;   - Show only errors
+;
+;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
+;
+;   - Show all errors, except coding standards warnings
+;
+error_reporting = E_ALL & ~E_NOTICE & ~E_STRICT
+
+; Print out errors (as a part of the output).  For production web sites,
+; you're strongly encouraged to turn this feature off, and use error logging
+; instead (see below).  Keeping display_errors enabled on a production web site
+; may reveal security information to end users, such as file paths on your Web
+; server, your database schema or other information.
+;
+; possible values for display_errors:
+;
+; Off          - Do not display any errors 
+; stderr       - Display errors to STDERR (affects only CGI/CLI binaries!)   
+; On or stdout - Display errors to STDOUT (default)
+;  
+; To output errors to STDERR with CGI/CLI:              
+;display_errors = "stderr"
+;
+; Default
+;
+display_errors = On
+
+; Even when display_errors is on, errors that occur during PHP's startup
+; sequence are not displayed.  It's strongly recommended to keep
+; display_startup_errors off, except for when debugging.
+display_startup_errors = Off
+
+; Log errors into a log file (server-specific log, stderr, or error_log (below))
+; As stated above, you're strongly advised to use error logging in place of
+; error displaying on production web sites.
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line until ignore_repeated_source is set true.
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This has only effect in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+report_memleaks = On
+
+;report_zend_debug = 0
+
+; Store the last error/warning message in $php_errormsg (boolean).
+track_errors = Off
+
+; Disable the inclusion of HTML tags in error messages.
+; Note: Never use this feature for production boxes.
+;html_errors = Off
+
+; If html_errors is set On PHP produces clickable error messages that direct
+; to a page describing the error or function causing the error in detail.
+; You can download a copy of the PHP manual from http://www.php.net/docs.php
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot.
+; Note: Never use this feature for production boxes.
+;docref_root = "/phpmanual/"
+;docref_ext = .html
+
+; String to output before an error message.
+;error_prepend_string = "<font color=ff0000>"
+
+; String to output after an error message.
+;error_append_string = "</font>"
+
+; Log errors to specified file.
+error_log = WAMPROOT/logs/php_error.log
+
+; Log errors to syslog (Event Log on NT, not valid in Windows 95).
+;error_log = syslog
+
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+;
+; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
+
+; The separator used in PHP generated URLs to separate arguments.
+; Default is "&".
+;arg_separator.output = "&amp;"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; Default is "&".
+; NOTE: Every character in this directive is considered as separator!
+;arg_separator.input = ";&"
+
+; This directive describes the order in which PHP registers GET, POST, Cookie,
+; Environment and Built-in variables (G, P, C, E & S respectively, often
+; referred to as EGPCS or GPC).  Registration is done from left to right, newer
+; values override older values.
+variables_order = "GPCS"
+
+; Whether or not to register the EGPCS variables as global variables.  You may
+; want to turn this off if you don't want to clutter your scripts' global scope
+; with user data.  This makes most sense when coupled with track_vars - in which
+; case you can access all of the GPC variables through the $HTTP_*_VARS[],
+; variables.
+;
+; You should do your best to write your scripts so that they do not require
+; register_globals to be on;  Using form variables as globals can easily lead
+; to possible security problems, if the code is not very well thought of.
+register_globals = Off
+
+; Whether or not to register the old-style input arrays, HTTP_GET_VARS
+; and friends.  If you're not using them, it's recommended to turn them off,
+; for performance reasons.
+register_long_arrays = Off
+
+; This directive tells PHP whether to declare the argv&argc variables (that
+; would contain the GET information).  If you don't use these variables, you
+; should turn it off for increased performance.
+register_argc_argv = Off
+
+; When enabled, the SERVER and ENV variables are created when they're first
+; used (Just In Time) instead of when the script starts. If these variables
+; are not used within a script, having this directive on will result in a
+; performance gain. The PHP directives register_globals, register_long_arrays,
+; and register_argc_argv must be disabled for this directive to have any affect.
+auto_globals_jit = On
+
+; Maximum size of POST data that PHP will accept.
+post_max_size = 8M
+
+; Magic quotes
+;
+
+; Magic quotes for incoming GET/POST/Cookie data.
+magic_quotes_gpc = Off
+
+; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
+magic_quotes_runtime = Off
+
+; Use Sybase-style magic quotes (escape ' with '' instead of \').
+magic_quotes_sybase = Off
+
+; Automatically add files before or after any PHP document.
+auto_prepend_file =
+auto_append_file =
+
+; As of 4.0b4, PHP always outputs a character encoding by default in
+; the Content-type: header.  To disable sending of the charset, simply
+; set it to be empty.
+;
+; PHP's built-in default is text/html
+default_mimetype = "text/html"
+;default_charset = "iso-8859-1"
+
+; Always populate the $HTTP_RAW_POST_DATA variable.
+;always_populate_raw_post_data = On
+
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+;include_path = ".:/php/includes"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues.  The alternate is to use the
+; cgi.force_redirect configuration below
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+extension_dir = "WAMPROOT/bin/php/php5.2.5/ext/"
+
+; Whether or not to enable the dl() function.  The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+enable_dl = On
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers.  Left undefined, PHP turns this on by default.  You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request.
+; cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution.  Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; cgi.redirect_status_env = ;
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI.  PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is.  For more information on PATH_INFO, see the cgi specs.  Setting
+; this to 1 will cause PHP CGI to fix it's paths to conform to the spec.  A setting
+; of zero causes PHP to behave as before.  Default is 1.  You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; cgi.fix_pathinfo=1
+
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
+; security tokens of the calling client.  This allows IIS to define the
+; security context that the request runs under.  mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS.  Default is zero.
+; fastcgi.impersonate = 1;
+
+; Disable logging through FastCGI connection
+; fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
+; is supported by Apache. When this option is set to 1 PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+;cgi.rfc2616_headers = 0
+
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+upload_tmp_dir = "WAMPROOT/tmp"
+
+; Maximum allowed size for uploaded files.
+upload_max_filesize = 2M
+
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+allow_url_fopen = On
+
+; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
+allow_url_include = Off
+
+; Define the anonymous ftp password (your email address)
+;from="john@doe.com"
+
+; Define the User-Agent string
+; user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; auto_detect_line_endings = Off
+
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+;
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+;   extension=modulename.extension
+;
+; For example, on Windows:
+;
+;   extension=msql.dll
+;
+; ... or under UNIX:
+;
+;   extension=msql.so
+;
+; Note that it should be the name of the module only; no directory information
+; needs to go here.  Specify the location of the extension with the
+; extension_dir directive above.
+
+
+; Windows Extensions
+; Note that ODBC support is built in, so no dll is needed for it.
+; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
+; extension folders as well as the separate PECL DLL download (PHP 5).
+; Be sure to appropriately set the extension_dir directive.
+
+;extension=php_bz2.dll
+;extension=php_curl.dll
+;extension=php_dba.dll
+;extension=php_dbase.dll
+;extension=php_exif.dll
+;extension=php_fdf.dll
+extension=php_gd2.dll
+;extension=php_gettext.dll
+;extension=php_gmp.dll
+;extension=php_ifx.dll
+;extension=php_imap.dll
+;extension=php_interbase.dll
+;extension=php_ldap.dll
+extension=php_mbstring.dll
+;extension=php_mcrypt.dll
+;extension=php_mhash.dll
+;extension=php_mime_magic.dll
+;extension=php_ming.dll
+;extension=php_msql.dll
+;extension=php_mssql.dll
+extension=php_mysql.dll
+extension=php_mysqli.dll
+;extension=php_oci8.dll
+;extension=php_openssl.dll
+extension=php_pdo.dll
+;extension=php_pdo_firebird.dll
+;extension=php_pdo_mssql.dll
+extension=php_pdo_mysql.dll
+;extension=php_pdo_oci.dll
+;extension=php_pdo_oci8.dll
+;extension=php_pdo_odbc.dll
+;extension=php_pdo_pgsql.dll
+;extension=php_pdo_sqlite.dll
+;extension=php_pgsql.dll
+;extension=php_pspell.dll
+;extension=php_shmop.dll
+;extension=php_snmp.dll
+;extension=php_soap.dll
+;extension=php_sockets.dll
+extension=php_sqlite.dll
+;extension=php_sybase_ct.dll
+;extension=php_tidy.dll
+;extension=php_xmlrpc.dll
+;extension=php_xsl.dll
+;extension=php_zip.dll
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[Date]
+; Defines the default timezone used by the date functions
+;date.timezone =
+
+;date.default_latitude = 31.7667
+;date.default_longitude = 35.2333
+
+;date.sunrise_zenith = 90.583333
+;date.sunset_zenith = 90.583333
+
+[filter]
+;filter.default = unsafe_raw
+;filter.default_flags =
+
+[iconv]
+;iconv.input_encoding = ISO-8859-1
+;iconv.internal_encoding = ISO-8859-1
+;iconv.output_encoding = ISO-8859-1
+
+[sqlite]
+;sqlite.assoc_case = 0
+
+[xmlrpc]
+;xmlrpc_error_number = 0
+;xmlrpc_errors = 0
+
+[Pcre]
+;PCRE library backtracking limit.
+;pcre.backtrack_limit=100000
+
+;PCRE library recursion limit. 
+;Please note that if you set this value to a high number you may consume all 
+;the available process stack and eventually crash PHP (due to reaching the 
+;stack size limit imposed by the Operating System).
+;pcre.recursion_limit=100000
+
+[Syslog]
+; Whether or not to define the various syslog variables (e.g. $LOG_PID,
+; $LOG_CRON, etc.).  Turning it off is a good idea performance-wise.  In
+; runtime, you can define these variables by calling define_syslog_variables().
+define_syslog_variables  = Off
+
+[mail function]
+; For Win32 only.
+SMTP = localhost
+smtp_port = 25
+
+; For Win32 only.
+;sendmail_from = me@example.com
+
+; For Unix only.  You may supply arguments as well (default: "sendmail -t -i").
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail(), even in safe mode.
+;mail.force_extra_parameters =
+
+[SQL]
+sql.safe_mode = Off
+
+[ODBC]
+;odbc.default_db    =  Not yet implemented
+;odbc.default_user  =  Not yet implemented
+;odbc.default_pw    =  Not yet implemented
+
+; Allow or prevent persistent links.
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+odbc.check_persistent = On
+
+; Maximum number of persistent links.  -1 means no limit.
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent).  -1 means no limit.
+odbc.max_links = -1
+
+; Handling of LONG fields.  Returns number of bytes to variables.  0 means
+; passthru.
+odbc.defaultlrl = 4096
+
+; Handling of binary data.  0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of uodbc.defaultlrl and uodbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+[MySQL]
+; Allow or prevent persistent links.
+mysql.allow_persistent = On
+
+; Maximum number of persistent links.  -1 means no limit.
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent).  -1 means no limit.
+mysql.max_links = -1
+
+; Default port number for mysql_connect().  If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
+; at MYSQL_PORT.
+mysql.default_port =
+
+; Default socket name for local MySQL connects.  If empty, uses the built-in
+; MySQL defaults.
+mysql.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
+; and reveal this password!  And of course, any users with read access to this
+; file will be able to reveal the password as well.
+mysql.default_password =
+
+; Maximum time (in seconds) for connect timeout. -1 means no limit
+mysql.connect_timeout = 60
+
+; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
+; SQL-Errors will be displayed.
+mysql.trace_mode = Off
+
+[MySQLi]
+
+; Maximum number of links.  -1 means no limit.
+mysqli.max_links = -1
+
+; Default port number for mysqli_connect().  If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
+; at MYSQL_PORT.
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects.  If empty, uses the built-in
+; MySQL defaults.
+mysqli.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+mysqli.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password!  And of course, any users with read access to this
+; file will be able to reveal the password as well.
+mysqli.default_pw =
+
+; Allow or prevent reconnect
+mysqli.reconnect = Off
+
+[mSQL]
+; Allow or prevent persistent links.
+msql.allow_persistent = On
+
+; Maximum number of persistent links.  -1 means no limit.
+msql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent).  -1 means no limit.
+msql.max_links = -1
+
+[OCI8]
+; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+;oci8.ping_interval = 60
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables statement prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+;oci8.default_prefetch = 10
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+;oci8.old_oci_close_semantics = Off
+
+[PostgresSQL]
+; Allow or prevent persistent links.
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links.  -1 means no limit.
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent).  -1 means no limit.
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Noitce message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+pgsql.log_notice = 0
+
+[Sybase]
+; Allow or prevent persistent links.
+sybase.allow_persistent = On
+
+; Maximum number of persistent links.  -1 means no limit.
+sybase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent).  -1 means no limit.
+sybase.max_links = -1
+
+;sybase.interface_file = "/usr/sybase/interfaces"
+
+; Minimum error severity to display.
+sybase.min_error_severity = 10
+
+; Minimum message severity to display.
+sybase.min_message_severity = 10
+
+; Compatibility mode with old versions of PHP 3.0.
+; If on, this will cause PHP to automatically assign types to results according
+; to their Sybase type, instead of treating them all as strings.  This
+; compatibility mode will probably not stay around forever, so try applying
+; whatever necessary changes to your code, and turn it off.
+sybase.compatability_mode = Off
+
+[Sybase-CT]
+; Allow or prevent persistent links.
+sybct.allow_persistent = On
+
+; Maximum number of persistent links.  -1 means no limit.
+sybct.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent).  -1 means no limit.
+sybct.max_links = -1
+
+; Minimum server message severity to display.
+sybct.min_server_severity = 10
+
+; Minimum client message severity to display.
+sybct.min_client_severity = 10
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+bcmath.scale = 0
+
+[browscap]
+;browscap = extra/browscap.ini
+
+[Informix]
+; Default host for ifx_connect() (doesn't apply in safe mode).
+ifx.default_host =
+
+; Default user for ifx_connect() (doesn't apply in safe mode).
+ifx.default_user =
+
+; Default password for ifx_connect() (doesn't apply in safe mode).
+ifx.default_password =
+
+; Allow or prevent persistent links.
+ifx.allow_persistent = On
+
+; Maximum number of persistent links.  -1 means no limit.
+ifx.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent).  -1 means no limit.
+ifx.max_links = -1
+
+; If on, select statements return the contents of a text blob instead of its id.
+ifx.textasvarchar = 0
+
+; If on, select statements return the contents of a byte blob instead of its id.
+ifx.byteasvarchar = 0
+
+; Trailing blanks are stripped from fixed-length char columns.  May help the
+; life of Informix SE users.
+ifx.charasvarchar = 0
+
+; If on, the contents of text and byte blobs are dumped to a file instead of
+; keeping them in memory.
+ifx.blobinfile = 0
+
+; NULL's are returned as empty strings, unless this is set to 1.  In that case,
+; NULL's are returned as string 'NULL'.
+ifx.nullformat = 0
+
+[Session]
+; Handler used to store/retrieve data.
+session.save_handler = files
+
+; Argument passed to save_handler.  In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; As of PHP 4.0.1, you can define the path as:
+;
+;     session.save_path = "N;/path"
+;
+; where N is an integer.  Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories.  This is useful if you
+; or your OS have problems with lots of files in one directory, and is
+; a more efficient layout for servers that handle lots of sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+;         You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+;         use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+;     session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+session.save_path = "WAMPROOT/tmp"
+
+; Whether to use cookies.
+session.use_cookies = 1
+
+;session.cookie_secure =
+
+; This option enables administrators to make their users invulnerable to
+; attacks which involve passing session ids in URLs; defaults to 0.
+; session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
+session.cookie_httponly = 
+
+; Handler used to serialize data.  php is the standard serializer of PHP.
+session.serialize_handler = php
+
+; Define the probability that the 'garbage collection' process is started
+; on every session initialization.
+; The probability is calculated by using gc_probability/gc_divisor,
+; e.g. 1/100 means there is a 1% chance that the GC process starts
+; on each request.
+
+session.gc_probability = 1
+session.gc_divisor     = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+;       (see session.save_path above), then garbage collection does *not*
+;       happen automatically.  You will need to do your own garbage
+;       collection through a shell script, cron entry, or some other method.
+;       For example, the following script would is the equivalent of
+;       setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+;          cd /path/to/sessions; find -cmin +24 | xargs rm
+
+; PHP 4.2 and less have an undocumented feature/bug that allows you to
+; to initialize a session variable in the global scope, albeit register_globals
+; is disabled.  PHP 4.3 and later will warn you, if this feature is used.
+; You can disable the feature and the warning separately. At this time,
+; the warning is only displayed, if bug_compat_42 is enabled.
+
+session.bug_compat_42 = 0
+session.bug_compat_warn = 1
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+session.referer_check =
+
+; How many bytes to read from the file.
+session.entropy_length = 0
+
+; Specified here to create the session id.
+session.entropy_file =
+
+;session.entropy_length = 16
+
+;session.entropy_file = /dev/urandom
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+;   to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+;   in publically accessible computer.
+; - User may access your site with the same session ID
+;   always using URL stored in browser's history or bookmarks.
+session.use_trans_sid = 0
+
+; Select a hash function
+; 0: MD5   (128 bits)
+; 1: SHA-1 (160 bits)
+session.hash_function = 0
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+;
+; 4 bits: 0-9, a-f
+; 5 bits: 0-9, a-v
+; 6 bits: 0-9, a-z, A-Z, "-", ","
+session.hash_bits_per_character = 5
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; form/fieldset are special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs.  If you want XHTML conformity, remove the form entry.
+; Note that all valid entries require a "=", even if no value follows.
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+[MSSQL]
+; Allow or prevent persistent links.
+mssql.allow_persistent = On
+
+; Maximum number of persistent links.  -1 means no limit.
+mssql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent).  -1 means no limit.
+mssql.max_links = -1
+
+; Minimum error severity to display.
+mssql.min_error_severity = 10
+
+; Minimum message severity to display.
+mssql.min_message_severity = 10
+
+; Compatibility mode with old versions of PHP 3.0.
+mssql.compatability_mode = Off
+
+; Connect timeout
+;mssql.connect_timeout = 5
+
+; Query timeout
+;mssql.timeout = 60
+
+; Valid range 0 - 2147483647.  Default = 4096.
+;mssql.textlimit = 4096
+
+; Valid range 0 - 2147483647.  Default = 4096.
+;mssql.textsize = 4096
+
+; Limits the number of records in each batch.  0 = all records in one batch.
+;mssql.batchsize = 0
+
+; Specify how datetime and datetim4 columns are returned
+; On => Returns data converted to SQL server settings
+; Off => Returns values as YYYY-MM-DD hh:mm:ss
+;mssql.datetimeconvert = On
+
+; Use NT authentication when connecting to the server
+mssql.secure_connection = Off
+
+; Specify max number of processes. -1 = library default
+; msdlib defaults to 25
+; FreeTDS defaults to 4096
+;mssql.max_procs = -1
+
+; Specify client character set. 
+; If empty or not set the client charset from freetds.comf is used
+; This is only used when compiled with FreeTDS
+;mssql.charset = "ISO-8859-1"
+
+[Assertion]
+; Assert(expr); active by default.
+;assert.active = On
+
+; Issue a PHP warning for each failed assertion.
+;assert.warning = On
+
+; Don't bail out by default.
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+;assert.callback = 0
+
+; Eval the expression with current error_reporting().  Set to true if you want
+; error_reporting(0) around the eval().
+;assert.quiet_eval = 0
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+;com.typelib_file =
+; allow Distributed-COM calls
+;com.allow_dcom = true
+; autoregister constants of a components typlib on com_load()
+;com.autoregister_typelib = true
+; register constants casesensitive
+;com.autoregister_casesensitive = false
+; show warnings on duplicate constant registrations
+;com.autoregister_verbose = true
+
+[mbstring]
+; language for internal character representation.
+;mbstring.language = Japanese
+
+; internal/script encoding.
+; Some encoding cannot work as internal encoding.
+; (e.g. SJIS, BIG5, ISO-2022-*)
+;mbstring.internal_encoding = EUC-JP
+
+; http input encoding.
+;mbstring.http_input = auto
+
+; http output encoding. mb_output_handler must be
+; registered as output buffer to function
+;mbstring.http_output = SJIS
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+;       portable libs/applications.
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; auto means
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+;mbstring.substitute_character = none;
+
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+;mbstring.func_overload = 0
+
+; enable strict encoding detection.
+;mbstring.strict_encoding = Off
+
+[FrontBase]
+;fbsql.allow_persistent = On
+;fbsql.autocommit = On
+;fbsql.show_timestamp_decimals = Off
+;fbsql.default_database =
+;fbsql.default_database_password =
+;fbsql.default_host =
+;fbsql.default_password =
+;fbsql.default_user = "_SYSTEM"
+;fbsql.generate_warnings = Off
+;fbsql.max_connections = 128
+;fbsql.max_links = 128
+;fbsql.max_persistent = -1
+;fbsql.max_results = 128
+
+[gd]
+; Tell the jpeg decode to libjpeg warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+;gd.jpeg_ignore_warning = 0
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+;exif.encode_unicode = ISO-8859-15
+;exif.decode_unicode_motorola = UCS-2BE
+;exif.decode_unicode_intel    = UCS-2LE
+;exif.encode_jis =
+;exif.decode_jis_motorola = JIS
+;exif.decode_jis_intel    = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+soap.wsdl_cache_enabled=1
+; Sets the directory name where SOAP extension will put cache files.
+soap.wsdl_cache_dir="/tmp"
+; (time to live) Sets the number of second while cached file will be used 
+; instead of original one.
+soap.wsdl_cache_ttl=86400
+
+; Local Variables:
+; tab-width: 4
+; End:
diff --git a/build/exe/doliwamp/phpmyadmin.conf.install b/build/exe/doliwamp/phpmyadmin.conf.install
new file mode 100644
index 00000000000..f607a3bc583
--- /dev/null
+++ b/build/exe/doliwamp/phpmyadmin.conf.install
@@ -0,0 +1,22 @@
+Alias /phpmyadmin "WAMPROOT/apps/phpmyadminWAMPPHPMYADMINVERSION/" 
+
+# to give access to phpmyadmin from outside 
+# replace the lines
+#
+#        Order Deny,Allow
+#	Deny from all
+#	Allow from 127.0.0.1
+#
+# by
+#
+#        Order Allow,Deny 
+#   Allow from all
+#
+
+<Directory "WAMPROOT/apps/phpmyadminWAMPPHPMYADMINVERSION/">
+    Options Indexes FollowSymLinks MultiViews
+    AllowOverride all
+        Order Deny,Allow
+	Deny from all
+	Allow from 127.0.0.1
+</Directory>
\ No newline at end of file
diff --git a/build/exe/doliwamp/removefiles.bat b/build/exe/doliwamp/removefiles.bat
new file mode 100644
index 00000000000..75f328eae12
--- /dev/null
+++ b/build/exe/doliwamp/removefiles.bat
@@ -0,0 +1 @@
+del /F .\mysqlinitpassword.bat
\ No newline at end of file
diff --git a/build/exe/doliwamp/rundoliwamp.bat.install b/build/exe/doliwamp/rundoliwamp.bat.install
new file mode 100644
index 00000000000..c8a4dccaaa9
--- /dev/null
+++ b/build/exe/doliwamp/rundoliwamp.bat.install
@@ -0,0 +1,3 @@
+@echo off
+REM Lancement Dolibarr
+"WAMPBROWSER" http://localhost:WAMPAPACHEPORT/dolibarr/
diff --git a/build/exe/doliwamp/startdoliwamp.bat b/build/exe/doliwamp/startdoliwamp.bat
new file mode 100644
index 00000000000..20171268be6
--- /dev/null
+++ b/build/exe/doliwamp/startdoliwamp.bat
@@ -0,0 +1,5 @@
+@echo off
+NET START doliwampapache
+NET START doliwampmysqld
+echo Please wait...
+sleep 1
\ No newline at end of file
diff --git a/build/exe/doliwamp/stopdoliwamp.bat b/build/exe/doliwamp/stopdoliwamp.bat
new file mode 100644
index 00000000000..a863a727ddc
--- /dev/null
+++ b/build/exe/doliwamp/stopdoliwamp.bat
@@ -0,0 +1,5 @@
+@echo off
+NET STOP doliwampapache
+NET STOP doliwampmysqld 
+echo Please wait...
+sleep 1
\ No newline at end of file
diff --git a/build/exe/doliwamp/uninstall_services.bat.install b/build/exe/doliwamp/uninstall_services.bat.install
new file mode 100644
index 00000000000..b3038ee4e06
--- /dev/null
+++ b/build/exe/doliwamp/uninstall_services.bat.install
@@ -0,0 +1,5 @@
+NET STOP doliwampapache
+.\bin\apache\apacheWAMPAPACHEVERSION\bin\httpd.exe -k uninstall -n doliwampapache
+NET STOP doliwampmysqld 
+.\bin\mysql\mysqlWAMPMYSQLVERSION\bin\mysqld-nt.exe --remove doliwampmysqld
+REM wampmanager.exe -quit -id={doliwampserver}
\ No newline at end of file
diff --git a/build/exe/dolibarr.nsi b/build/exe/nsi/dolibarr.nsi
similarity index 100%
rename from build/exe/dolibarr.nsi
rename to build/exe/nsi/dolibarr.nsi
diff --git a/build/exe/dolibarr_bitmap1.bmp b/build/exe/nsi/dolibarr_bitmap1.bmp
similarity index 100%
rename from build/exe/dolibarr_bitmap1.bmp
rename to build/exe/nsi/dolibarr_bitmap1.bmp
diff --git a/build/exe/dolibarr_bitmap2.bmp b/build/exe/nsi/dolibarr_bitmap2.bmp
similarity index 100%
rename from build/exe/dolibarr_bitmap2.bmp
rename to build/exe/nsi/dolibarr_bitmap2.bmp