Transifex sync

htdocs/langs/am_ET/accountancy.lang

@@ -158,7 +158,7 @@ ACCOUNTING_LENGTH_AACCOUNT=Length of the third-party accounting accounts (If you
 ACCOUNTING_MANAGE_ZERO=Allow to manage different number of zeros at the end of an accounting account. Needed by some countries (like Switzerland). If set to off (default), you can set the following two parameters to ask the application to add virtual zeros.
 BANK_DISABLE_DIRECT_INPUT=Disable direct recording of transaction in bank account
 ACCOUNTING_ENABLE_EXPORT_DRAFT_JOURNAL=Enable draft export on journal
-ACCOUNTANCY_COMBO_FOR_AUX=Enable combo list for subsidiary account (may be slow if you have a lot of third parties)
+ACCOUNTANCY_COMBO_FOR_AUX=Enable combo list for subsidiary account (may be slow if you have a lot of third parties, break ability to search on a part of value)
 ACCOUNTING_DATE_START_BINDING=Define a date to start binding & transfer in accountancy. Below this date, the transactions will not be transferred to accounting.
 ACCOUNTING_DEFAULT_PERIOD_ON_TRANSFER=On accountancy transfer, select period show by default
 
@@ -328,6 +328,9 @@ ACCOUNTING_DISABLE_BINDING_ON_PURCHASES=Disable binding & transfer in accountanc
 ACCOUNTING_DISABLE_BINDING_ON_EXPENSEREPORTS=Disable binding & transfer in accountancy on expense reports (expense reports will not be taken into account in accounting)
 
 ## Export
+NotifiedExportDate=Notified export date (modification of the entries will not be possible)
+NotifiedValidationDate=Validation of the entries (modification or deletion of the entries will not be possible)
+ConfirmExportFile=Confirmation of the generation of the accounting export file ?
 ExportDraftJournal=Export draft journal
 Modelcsv=Model of export
 Selectmodelcsv=Select a model of export

htdocs/langs/am_ET/admin.lang

@@ -221,8 +221,8 @@ NotCompatible=This module does not seem compatible with your Dolibarr %s (Min %s
 CompatibleAfterUpdate=This module requires an update to your Dolibarr %s (Min %s - Max %s).
 SeeInMarkerPlace=See in Market place
 SeeSetupOfModule=See setup of module %s
+SetOptionTo=Set option <b>%s</b> to %s
 Updated=Updated
-Nouveauté=Novelty
 AchatTelechargement=Buy / Download
 GoModuleSetupArea=To deploy/install a new module, go to the Module setup area: <a href="%s">%s</a>.
 DoliStoreDesc=DoliStore, the official market place for Dolibarr ERP/CRM external modules
@@ -399,6 +399,7 @@ SecurityToken=Key to secure URLs
 NoSmsEngine=No SMS sender manager available. A SMS sender manager is not installed with the default distribution because they depend on an external vendor, but you can find some on %s
 PDF=PDF
 PDFDesc=Global options for PDF generation
+PDFOtherDesc=PDF Option specific to some modules
 PDFAddressForging=Rules for address section
 HideAnyVATInformationOnPDF=Hide all information related to Sales Tax / VAT
 PDFRulesForSalesTax=Rules for Sales Tax / VAT
@@ -561,7 +562,7 @@ Module53Desc=Management of Services
 Module54Name=Contracts/Subscriptions
 Module54Desc=Management of contracts (services or recurring subscriptions)
 Module55Name=Barcodes
-Module55Desc=Barcode management
+Module55Desc=Barcode or QR code management
 Module56Name=Payment by credit transfer
 Module56Desc=Management of payment of suppliers by Credit Transfer orders. It includes generation of SEPA file for European countries.
 Module57Name=Payments by Direct Debit
@@ -848,10 +849,10 @@ Permission402=Create/modify discounts
 Permission403=Validate discounts
 Permission404=Delete discounts
 Permission430=Use Debug Bar
-Permission511=Read payments of salaries (yours and subordinates)
+Permission511=Read salaries and payments (yours and subordinates)
-Permission512=Create/modify payments of salaries
+Permission512=Create/modify salaries and payments
-Permission514=Delete payments of salaries
+Permission514=Delete salaries and payments
-Permission517=Read payments of salaries of everybody
+Permission517=Read salaries and payments everybody
 Permission519=Export salaries
 Permission520=Read Loans
 Permission522=Create/modify loans
@@ -965,6 +966,8 @@ Permission23003=Delete Scheduled job
 Permission23004=Execute Scheduled job
 Permission50101=Use Point of Sale (SimplePOS)
 Permission50151=Use Point of Sale (TakePOS)
+Permission50152=Edit sales lines
+Permission50153=Edit ordered sales lines
 Permission50201=Read transactions
 Permission50202=Import transactions
 Permission50330=Read objects of Zapier
@@ -1039,11 +1042,12 @@ DictionaryMeasuringUnits=Measuring Units
 DictionarySocialNetworks=Social Networks
 DictionaryProspectStatus=Prospect status for companies
 DictionaryProspectContactStatus=Prospect status for contacts
-DictionaryHolidayTypes=Types of leave
+DictionaryHolidayTypes=Leave - Types of leave
 DictionaryOpportunityStatus=Lead status for project/lead
 DictionaryExpenseTaxCat=Expense report - Transportation categories
 DictionaryExpenseTaxRange=Expense report - Range by transportation category
 DictionaryTransportMode=Intracomm report - Transport mode
+DictionaryBatchStatus=Product lot/serial Quality Control status
 TypeOfUnit=Type of unit
 SetupSaved=Setup saved
 SetupNotSaved=Setup not saved
@@ -1187,7 +1191,7 @@ SetupDescription4=<a href="%s">%s -> %s</a><br><br>This software is a suite of m
 SetupDescription5=Other Setup menu entries manage optional parameters.
 AuditedSecurityEvents=Security events that are audited
 NoSecurityEventsAreAduited=No security events are audited. You can enable them from menu %s
-Audit=Audit
+Audit=Security events
 InfoDolibarr=About Dolibarr
 InfoBrowser=About Browser
 InfoOS=About OS
@@ -1319,9 +1323,12 @@ ConditionIsCurrently=Condition is currently %s
 YouUseBestDriver=You use driver %s which is the best driver currently available.
 YouDoNotUseBestDriver=You use driver %s but driver %s is recommended.
 NbOfObjectIsLowerThanNoPb=You have only %s %s in the database. This does not require any particular optimization.
+ComboListOptim=Combo list loading optimization
 SearchOptim=Search optimization
-YouHaveXObjectUseSearchOptim=You have %s %s in the database. You can add the constant %s to 1 in Home-Setup-Other. Limit the search to the beginning of strings which makes it possible for the database to use indexes and you should get an immediate response.
+YouHaveXObjectUseComboOptim=You have %s %s in the database. You can go into setup of module to enable loading of combo list on key pressed event.
-YouHaveXObjectAndSearchOptimOn=You have %s %s in the database and constant %s is set to 1 in Home-Setup-Other.
+YouHaveXObjectUseSearchOptim=You have %s %s in the database. You can add the constant %s to 1 in Home-Setup-Other.
+YouHaveXObjectUseSearchOptimDesc=This limits the search to the beginning of strings which makes it possible for the database to use indexes and you should get an immediate response.
+YouHaveXObjectAndSearchOptimOn=You have %s %s in the database and constant %s is set to %s in Home-Setup-Other.
 BrowserIsOK=You are using the %s web browser. This browser is ok for security and performance.
 BrowserIsKO=You are using the %s web browser. This browser is known to be a bad choice for security, performance and reliability. We recommend using Firefox, Chrome, Opera or Safari.
 PHPModuleLoaded=PHP component %s is loaded
@@ -1433,6 +1440,7 @@ MemberMainOptions=Main options
 AdherentLoginRequired= Manage a Login for each member
 AdherentMailRequired=Email required to create a new member
 MemberSendInformationByMailByDefault=Checkbox to send mail confirmation to members (validation or new subscription) is on by default
+MemberCreateAnExternalUserForSubscriptionValidated=Create an external user login for each new member subscription validated
 VisitorCanChooseItsPaymentMode=Visitor can choose from available payment modes
 MEMBER_REMINDER_EMAIL=Enable automatic reminder <b>by email</b> of expired subscriptions. Note: Module <strong>%s</strong> must be enabled and correctly setup to send reminders.
 MembersDocModules=Document templates for documents generated from member record
@@ -1763,7 +1771,7 @@ AGENDA_DEFAULT_VIEW=Which view do you want to open by default when selecting men
 AGENDA_REMINDER_BROWSER=Enable event reminder <b>on user's browser</b> (When remind date is reached, a popup is shown by the browser. Each user can disable such notifications from its browser notification setup).
 AGENDA_REMINDER_BROWSER_SOUND=Enable sound notification
 AGENDA_REMINDER_EMAIL=Enable event reminder <b>by emails</b> (remind option/delay can be defined on each event).
-AGENDA_REMINDER_EMAIL_NOTE=Note: The frequency of the task %s must be enough to be sure that the remind are sent at the correct moment.
+AGENDA_REMINDER_EMAIL_NOTE=Note: The frequency of the scheduled job %s must be enough to be sure that the remind are sent at the correct moment.
 AGENDA_SHOW_LINKED_OBJECT=Show linked object into agenda view
 ##### Clicktodial #####
 ClickToDialSetup=Click To Dial module setup
@@ -1979,6 +1987,8 @@ MAIN_PDF_MARGIN_RIGHT=Right margin on PDF
 MAIN_PDF_MARGIN_TOP=Top margin on PDF
 MAIN_PDF_MARGIN_BOTTOM=Bottom margin on PDF
 MAIN_DOCUMENTS_LOGO_HEIGHT=Height for logo on PDF
+MAIN_GENERATE_PROPOSALS_WITH_PICTURE=Add picture on proposal line
+MAIN_PDF_PROPAL_USE_ELECTRONIC_SIGNING=Add electronic sign in PDF
 NothingToSetup=There is no specific setup required for this module.
 SetToYesIfGroupIsComputationOfOtherGroups=Set this to yes if this group is a computation of other groups
 EnterCalculationRuleIfPreviousFieldIsYes=Enter calculation rule if previous field was set to Yes.<br>For example:<br>CODEGRP1+CODEGRP2
@@ -2096,7 +2106,6 @@ PDF_SHOW_PROJECT=Show project on document
 ShowProjectLabel=Project Label
 PDF_USE_ALSO_LANGUAGE_CODE=If you want to have some texts in your PDF duplicated in 2 different languages in the same generated PDF, you must set here this second language so generated PDF will contains 2 different languages in same page, the one chosen when generating PDF and this one (only few PDF templates support this). Keep empty for 1 language per PDF.
 FafaIconSocialNetworksDesc=Enter here the code of a FontAwesome icon. If you don't know what is FontAwesome, you can use the generic value fa-address-book.
-FeatureNotAvailableWithReceptionModule=Feature not available when module Reception is enabled
 RssNote=Note: Each RSS feed definition provides a widget that you must enable to have it available in dashboard
 JumpToBoxes=Jump to Setup -> Widgets
 MeasuringUnitTypeDesc=Use here a value like "size", "surface", "volume", "weight", "time"
@@ -2120,12 +2129,18 @@ ConfFileIsReadableOrWritableByAnyUsers=The conf file is readable or writable by
 MailToSendEventOrganization=Event Organization
 AGENDA_EVENT_DEFAULT_STATUS=Default event status when creating a event from the form
 YouShouldDisablePHPFunctions=You should disable PHP functions
-IfCLINotRequiredYouShouldDisablePHPFunctions=Except if you need to run system commands (for the module Scheduled job, or to run the external command line Anti-virus for example), you shoud disable PHP functions
+IfCLINotRequiredYouShouldDisablePHPFunctions=Except if you need to run system commands in custom code, you shoud disable PHP functions
+PHPFunctionsRequiredForCLI=For shell purpose (like scheduled job backup or running an anitivurs program), you must keep PHP functions
 NoWritableFilesFoundIntoRootDir=No writable files or directories of the common programs were found into your root directory (Good)
 RecommendedValueIs=Recommended: %s
+NotRecommended=Not recommanded
 ARestrictedPath=A restricted path
 CheckForModuleUpdate=Check for external modules updates
 CheckForModuleUpdateHelp=This action will connect to editors of external modules to check if a new version is available.
 ModuleUpdateAvailable=An update is available
 NoExternalModuleWithUpdate=No updates found for external modules
 SwaggerDescriptionFile=Swagger API description file (for use with redoc for example)
+YouEnableDeprecatedWSAPIsUseRESTAPIsInstead=You enabled deprecated WS API. You should use REST API instead.
+RandomlySelectedIfSeveral=Randomly selected if several pictures are available
+DatabasePasswordObfuscated=Database password is obfuscated in conf file
+DatabasePasswordNotObfuscated=Database password is NOT obfuscated in conf file

htdocs/langs/am_ET/agenda.lang

@@ -4,7 +4,7 @@ Actions=Events
 Agenda=Agenda
 TMenuAgenda=Agenda
 Agendas=Agendas
-LocalAgenda=Internal calendar
+LocalAgenda=Default calendar
 ActionsOwnedBy=Event owned by
 ActionsOwnedByShort=Owner
 AffectedTo=Assigned to
@@ -14,13 +14,13 @@ EventsNb=Number of events
 ListOfActions=List of events
 EventReports=Event reports
 Location=Location
-ToUserOfGroup=Event assigned to any user in group
+ToUserOfGroup=Event assigned to any user in the group
 EventOnFullDay=Event on all day(s)
 MenuToDoActions=All incomplete events
 MenuDoneActions=All terminated events
 MenuToDoMyActions=My incomplete events
 MenuDoneMyActions=My terminated events
-ListOfEvents=List of events (internal calendar)
+ListOfEvents=List of events (default calendar)
 ActionsAskedBy=Events reported by
 ActionsToDoBy=Events assigned to
 ActionsDoneBy=Events done by
@@ -38,6 +38,7 @@ ActionsEvents=Events for which Dolibarr will create an action in agenda automati
 EventRemindersByEmailNotEnabled=Event reminders by email was not enabled into %s module setup.
 ##### Agenda event labels #####
 NewCompanyToDolibarr=Third party %s created
+COMPANY_MODIFYInDolibarr=Third party %s modified
 COMPANY_DELETEInDolibarr=Third party %s deleted
 ContractValidatedInDolibarr=Contract %s validated
 CONTRACT_DELETEInDolibarr=Contract %s deleted
@@ -87,6 +88,7 @@ OrderDeleted=Order deleted
 InvoiceDeleted=Invoice deleted
 DraftInvoiceDeleted=Draft invoice deleted
 CONTACT_CREATEInDolibarr=Contact %s created
+CONTACT_MODIFYInDolibarr=Contact %s modified
 CONTACT_DELETEInDolibarr=Contact %s deleted
 PRODUCT_CREATEInDolibarr=Product %s created
 PRODUCT_MODIFYInDolibarr=Product %s modified
@@ -119,6 +121,7 @@ MRP_MO_UNVALIDATEInDolibarr=MO set to draft status
 MRP_MO_PRODUCEDInDolibarr=MO produced
 MRP_MO_DELETEInDolibarr=MO deleted
 MRP_MO_CANCELInDolibarr=MO canceled
+PAIDInDolibarr=%s paid
 ##### End agenda events #####
 AgendaModelModule=Document templates for event
 DateActionStart=Start date
@@ -130,7 +133,7 @@ AgendaUrlOptions4=<b>logint=%s</b> to restrict output to actions assigned to use
 AgendaUrlOptionsProject=<b>project=__PROJECT_ID__</b> to restrict output to actions linked to project <b>__PROJECT_ID__</b>.
 AgendaUrlOptionsNotAutoEvent=<b>notactiontype=systemauto</b> to exclude automatic events.
 AgendaUrlOptionsIncludeHolidays=<b>includeholidays=1</b> to include events of holidays.
-AgendaShowBirthdayEvents=Show birthdays of contacts
+AgendaShowBirthdayEvents=Birthdays of contacts
 AgendaHideBirthdayEvents=Hide birthdays of contacts
 Busy=Busy
 ExportDataset_event1=List of agenda events
@@ -152,6 +155,7 @@ ActionType=Event type
 DateActionBegin=Start event date
 ConfirmCloneEvent=Are you sure you want to clone the event <b>%s</b>?
 RepeatEvent=Repeat event
+OnceOnly=Once only
 EveryWeek=Every week
 EveryMonth=Every month
 DayOfMonth=Day of month
@@ -165,4 +169,4 @@ TimeType=Duration type
 ReminderType=Callback type
 AddReminder=Create an automatic reminder notification for this event
 ErrorReminderActionCommCreation=Error creating the reminder notification for this event
-BrowserPush=Browser Notification
+BrowserPush=Browser Popup Notification

htdocs/langs/am_ET/bills.lang

@@ -259,6 +259,7 @@ DateMaxPayment=Payment due on
 DateInvoice=Invoice date
 DatePointOfTax=Point of tax
 NoInvoice=No invoice
+NoOpenInvoice=No open invoice
 ClassifyBill=Classify invoice
 SupplierBillsToPay=Unpaid vendor invoices
 CustomerBillsUnpaid=Unpaid customer invoices
@@ -589,3 +590,4 @@ FacParentLine=Invoice Line Parent
 SituationTotalRayToRest=Remainder to pay without taxe
 PDFSituationTitle=Situation n° %d
 SituationTotalProgress=Total progress %d %%
+SearchUnpaidInvoicesWithDueDate=Search unpaid invoices with a due date = %s

htdocs/langs/am_ET/cashdesk.lang

@@ -102,7 +102,7 @@ CashDeskGenericMaskCodes6 = <br><b>{TN}</b> tag is used to add the terminal numb
 TakeposGroupSameProduct=Group same products lines
 StartAParallelSale=Start a new parallel sale
 SaleStartedAt=Sale started at %s
-ControlCashOpening=Control cash popup at opening POS
+ControlCashOpening=Open the "Control cash" popup when opening the POS
 CloseCashFence=Close cash desk control
 CashReport=Cash report
 MainPrinterToUse=Main printer to use
@@ -126,5 +126,5 @@ ModuleReceiptPrinterMustBeEnabled=Module Receipt printer must have been enabled
 AllowDelayedPayment=Allow delayed payment
 PrintPaymentMethodOnReceipts=Print payment method on tickets|receipts
 WeighingScale=Weighing scale
-ShowPriceHT = Display the price excluding tax column
+ShowPriceHT = Display the column with the price excluding tax (on screen)
-ShowPriceHTOnReceipt = Display the price excluding tax column on receipt
+ShowPriceHTOnReceipt = Display the column with the price excluding tax (on receipt)

htdocs/langs/am_ET/compta.lang

@@ -286,3 +286,9 @@ ReportPurchaseTurnover=Purchase turnover invoiced
 ReportPurchaseTurnoverCollected=Purchase turnover collected
 IncludeVarpaysInResults = Include various payments in reports
 IncludeLoansInResults = Include loans in reports
+InvoiceLate30Days = Invoices late > 30 days
+InvoiceLate15Days = Invoices late > 15 days
+InvoiceLateMinus15Days = Invoices late
+InvoiceNotLate = To be collected < 15 days
+InvoiceNotLate15Days = To be collected in 15 days
+InvoiceNotLate30Days = To be collected in 30 days

htdocs/langs/am_ET/cron.lang

@@ -60,7 +60,7 @@ CronErrEndDateStartDt=End date cannot be before start date
 StatusAtInstall=Status at module installation
 CronStatusActiveBtn=Schedule
 CronStatusInactiveBtn=Disable
-CronTaskInactive=This job is disabled
+CronTaskInactive=This job is disabled (not scheduled)
 CronId=Id
 CronClassFile=Filename with class
 CronModuleHelp=Name of Dolibarr module directory (also work with external Dolibarr module). <BR> For example to call the fetch method of Dolibarr Product object /htdocs/<u>product</u>/class/product.class.php, the value for module is<br><i>product</i>

htdocs/langs/am_ET/errors.lang

@@ -11,6 +11,7 @@ ErrorBadValueForParamNotAString=Bad value for your parameter. It appends general
 ErrorRefAlreadyExists=Reference <b>%s</b> already exists.
 ErrorLoginAlreadyExists=Login %s already exists.
 ErrorGroupAlreadyExists=Group %s already exists.
+ErrorEmailAlreadyExists=Email %s already exists.
 ErrorRecordNotFound=Record not found.
 ErrorFailToCopyFile=Failed to copy file '<b>%s</b>' into '<b>%s</b>'.
 ErrorFailToCopyDir=Failed to copy directory '<b>%s</b>' into '<b>%s</b>'.
@@ -117,7 +118,7 @@ ErrorCantReadFile=Failed to read file '%s'
 ErrorCantReadDir=Failed to read directory '%s'
 ErrorBadLoginPassword=Bad value for login or password
 ErrorLoginDisabled=Your account has been disabled
-ErrorFailedToRunExternalCommand=Failed to run external command. Check it is available and runnable by your PHP server. If PHP <b>Safe Mode</b> is enabled, check that command is inside a directory defined by parameter <b>safe_mode_exec_dir</b>.
+ErrorFailedToRunExternalCommand=Failed to run external command. Check it is available and runnable by your PHP server user. Check also the command is not protected on shell level by a security layer like apparmor.
 ErrorFailedToChangePassword=Failed to change password
 ErrorLoginDoesNotExists=User with login <b>%s</b> could not be found.
 ErrorLoginHasNoEmail=This user has no email address. Process aborted.
@@ -262,6 +263,7 @@ ErrorDateIsInFuture=Error, the date can't be in the future
 ErrorAnAmountWithoutTaxIsRequired=Error, amount is mandatory
 ErrorAPercentIsRequired=Error, please fill in the percentage correctly
 ErrorYouMustFirstSetupYourChartOfAccount=You must first setup your chart of account
+ErrorFailedToFindEmailTemplate=Failed to find template with code name %s
 
 # Warnings
 WarningParamUploadMaxFileSizeHigherThanPostMaxSize=Your PHP parameter upload_max_filesize (%s) is higher than PHP parameter post_max_size (%s). This is not a consistent setup.
@@ -298,3 +300,4 @@ WarningModuleXDisabledSoYouMayMissEventHere=Module %s has not been enabled. So y
 ErrorActionCommPropertyUserowneridNotDefined=User's owner is required
 ErrorActionCommBadType=Selected event type (id: %n, code: %s) do not exist in Event Type dictionary
 CheckVersionFail=Version check fail
+ErrorWrongFileName=Name of the file cannot have __SOMETHING__ in it

htdocs/langs/am_ET/eventorganization.lang

@@ -1,4 +1,5 @@
 # Copyright (C) 2021		Florian Henry			<florian.henry@scopen.fr>
+# Copyright (C) 2021		Dorian Vabre			<dorian.vabre@gmail.com>
 #
 # This program is free software: you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -81,7 +82,10 @@ PriceOfBoothHelp=Subscription price to stand a booth
 EventOrganizationICSLink=Link ICS for events
 ConferenceOrBoothInformation=Conference Or Booth informations
 Attendees = Attendees
+DownloadICSLink = Download ICS link
 EVENTORGANIZATION_SECUREKEY = Secure Key of the public registration link to a conference
+SERVICE_BOOTH_LOCATION = Service used for the invoice row about a booth location
+SERVICE_CONFERENCE_ATTENDEE_SUBSCRIPTION = Service used for the invoice row about an attendee subscription to a conference
 #
 # Status
 #
@@ -94,8 +98,46 @@ EvntOrgCancelled = Cancelled
 #
 # Public page
 #
+SuggestForm = Suggestion page
+RegisterPage = Page for conferences or booth
+EvntOrgRegistrationHelpMessage = Here, you can vote for an event, or suggest a new conference or booth for the project
+EvntOrgRegistrationConfHelpMessage = Here, you can suggest a new conference for the project
+EvntOrgRegistrationBoothHelpMessage = Here, you can suggest a new booth for the project
+ListOfSuggestedConferences = List of suggested conferences
+ListOfSuggestedBooths = List of suggested booths
+SuggestConference = Suggest a new conference
+SuggestBooth = Suggest a booth
+ViewAndVote = View and vote for suggested events
 PublicAttendeeSubscriptionPage = Public link of registration to a conference
 MissingOrBadSecureKey = The security key is invalid or missing
-EvntOrgWelcomeMessage = This form allows you to register as a new participant to the conference
+EvntOrgWelcomeMessage = This form allows you to register as a new participant to the conference : '%s'
-EvntOrgStartDuration = This conference starts on
+EvntOrgDuration = This conference starts on %s and ends on %s.
-EvntOrgEndDuration =  and ends on
+ConferenceAttendeeFee = Conference attendee fee for the event : '%s' occurring from %s to %s.
+BoothLocationFee = Booth location for the event : '%s' occurring from %s to %s
+EventType = Event type
+
+#
+# Vote page
+#
+EvntOrgRegistrationWelcomeMessage = Welcome on the conference or booth suggestion page.
+EvntOrgRegistrationConfWelcomeMessage = Welcome on the conference suggestion page.
+EvntOrgRegistrationBoothWelcomeMessage = Welcome on the booth suggestion page.
+EvntOrgVoteHelpMessage = Here, you can view and vote for the suggested events for the project
+VoteOk = Your vote has been accepted.
+AlreadyVoted = You have already voted for this event.
+VoteError = An error has occurred during the vote, please try again.
+
+#
+# SubscriptionOk page
+#
+SubscriptionOk = Your subscription to this conference has been validated
+#
+# Subscription validation mail
+#
+ConfAttendeeSubscriptionConfirmation = Confirmation of your subscription to a conference
+#
+# Payment page
+#
+Attendee = Attendee
+PaymentConferenceAttendee = Conference attendee payment
+PaymentBoothLocation = Booth location payment

htdocs/langs/am_ET/hrm.lang

@@ -9,7 +9,7 @@ ConfirmDeleteEstablishment=Are you sure you wish to delete this establishment?
 OpenEtablishment=Open establishment
 CloseEtablishment=Close establishment
 # Dictionary
-DictionaryPublicHolidays=HRM - Public holidays
+DictionaryPublicHolidays=Leave - Public holidays
 DictionaryDepartment=HRM - Department list
 DictionaryFunction=HRM - Job positions
 # Module

htdocs/langs/am_ET/knowledgemanagement.lang

@@ -47,7 +47,7 @@ KnowledgeManagementArea = Knowledge Management
 # Menu
 #
 MenuKnowledgeRecord = Knowledge base
-ListOfArticles = List of articles
+ListKnowledgeRecord = List of articles
 NewKnowledgeRecord = New article
 ValidateReply = Validate solution
 KnowledgeRecords = Articles

htdocs/langs/am_ET/languages.lang

@@ -3,6 +3,7 @@ Language_am_ET=Ethiopian
 Language_ar_AR=Arabic
 Language_ar_EG=Arabic (Egypt)
 Language_ar_SA=Arabic
+Language_ar_TN=Arabic (Tunisia)
 Language_az_AZ=Azerbaijani
 Language_bn_BD=Bengali
 Language_bn_IN=Bengali (India)
@@ -84,6 +85,7 @@ Language_nl_NL=Dutch
 Language_pl_PL=Polish
 Language_pt_BR=Portuguese (Brazil)
 Language_pt_PT=Portuguese
+Language_ro_MD=Romanian (Moldavia)
 Language_ro_RO=Romanian
 Language_ru_RU=Russian
 Language_ru_UA=Russian (Ukraine)

htdocs/langs/am_ET/main.lang

@@ -430,6 +430,7 @@ LT1IN=CGST
 LT2IN=SGST
 LT1GC=Additionnal cents
 VATRate=Tax Rate
+RateOfTaxN=Rate of tax %s
 VATCode=Tax Rate code
 VATNPR=Tax Rate NPR
 DefaultTaxRate=Default tax rate
@@ -729,6 +730,7 @@ MenuMembers=Members
 MenuAgendaGoogle=Google agenda
 MenuTaxesAndSpecialExpenses=Taxes | Special expenses
 ThisLimitIsDefinedInSetup=Dolibarr limit (Menu home-setup-security): %s Kb, PHP limit: %s Kb
+ThisLimitIsDefinedInSetupAt=Dolibarr limit (Menu %s): %s Kb, PHP limit (Param %s): %s Kb
 NoFileFound=No documents uploaded
 CurrentUserLanguage=Current language
 CurrentTheme=Current theme
@@ -1072,6 +1074,7 @@ ValidFrom=Valid from
 ValidUntil=Valid until
 NoRecordedUsers=No users
 ToClose=To close
+ToRefuse=To refuse
 ToProcess=To process
 ToApprove=To approve
 GlobalOpenedElemView=Global view
@@ -1126,9 +1129,11 @@ UpdateForAllLines=Update for all lines
 OnHold=On hold
 Civility=Civility
 AffectTag=Affect Tag
+CreateExternalUser=Create external user
 ConfirmAffectTag=Bulk Tag Affect
 ConfirmAffectTagQuestion=Are you sure you want to affect tags to the %s selected record(s)?
 CategTypeNotFound=No tag type found for type of records
 CopiedToClipboard=Copied to clipboard
 InformationOnLinkToContract=This amount is only the total of all the lines of the contract. No notion of time is taken into consideration.
 ConfirmCancel=Are you sure you want to cancel
+EmailMsgID=Email MsgID

htdocs/langs/am_ET/members.lang

@@ -213,3 +213,5 @@ SendReminderForExpiredSubscription=Send reminder by email to members when subscr
 MembershipPaid=Membership paid for current period (until %s)
 YouMayFindYourInvoiceInThisEmail=You may find your invoice attached to this email
 XMembersClosed=%s member(s) closed
+XExternalUserCreated=%s external user(s) created
+ForceMemberNature=Force member nature (Individual or Corporation)

htdocs/langs/am_ET/modulebuilder.lang

@@ -143,3 +143,4 @@ AsciiToHtmlConverter=Ascii to HTML converter
 AsciiToPdfConverter=Ascii to PDF converter
 TableNotEmptyDropCanceled=Table not empty. Drop has been canceled.
 ModuleBuilderNotAllowed=The module builder is available but not allowed to your user.
+ImportExportProfiles=Import and export profiles

htdocs/langs/am_ET/mrp.lang

@@ -8,12 +8,12 @@ MenuBOM=Bills of material
 LatestBOMModified=Latest %s Bills of materials modified
 LatestMOModified=Latest %s Manufacturing Orders modified
 Bom=Bills of Material
-BillOfMaterials=Bill of Material
+BillOfMaterials=Bill of Materials
 BOMsSetup=Setup of module BOM
 ListOfBOMs=List of bills of material - BOM
 ListOfManufacturingOrders=List of Manufacturing Orders
-NewBOM=New bill of material
+NewBOM=New bill of materials
-ProductBOMHelp=Product to create with this BOM.<br>Note: Products with the property 'Nature of product' = 'Raw material' are not visible into this list.
+ProductBOMHelp=Product to create (or disassemble) with this BOM.<br>Note: Products with the property 'Nature of product' = 'Raw material' are not visible into this list.
 BOMsNumberingModules=BOM numbering templates
 BOMsModelModule=BOM document templates
 MOsNumberingModules=MO numbering templates
@@ -22,7 +22,7 @@ FreeLegalTextOnBOMs=Free text on document of BOM
 WatermarkOnDraftBOMs=Watermark on draft BOM
 FreeLegalTextOnMOs=Free text on document of MO
 WatermarkOnDraftMOs=Watermark on draft MO
-ConfirmCloneBillOfMaterials=Are you sure you want to clone the bill of material %s ?
+ConfirmCloneBillOfMaterials=Are you sure you want to clone the bill of materials %s ?
 ConfirmCloneMo=Are you sure you want to clone the Manufacturing Order %s ?
 ManufacturingEfficiency=Manufacturing efficiency
 ConsumptionEfficiency=Consumption efficiency
@@ -30,8 +30,8 @@ ValueOfMeansLoss=Value of 0.95 means an average of 5%% of loss during the produc
 ValueOfMeansLossForProductProduced=Value of 0.95 means an average of 5%% of loss of produced product
 DeleteBillOfMaterials=Delete Bill Of Materials
 DeleteMo=Delete Manufacturing Order
-ConfirmDeleteBillOfMaterials=Are you sure you want to delete this Bill Of Material?
+ConfirmDeleteBillOfMaterials=Are you sure you want to delete this Bill Of Materials?
-ConfirmDeleteMo=Are you sure you want to delete this Bill Of Material?
+ConfirmDeleteMo=Are you sure you want to delete this Bill Of Materials?
 MenuMRP=Manufacturing Orders
 NewMO=New Manufacturing Order
 QtyToProduce=Qty to produce
@@ -39,7 +39,7 @@ DateStartPlannedMo=Date start planned
 DateEndPlannedMo=Date end planned
 KeepEmptyForAsap=Empty means 'As Soon As Possible'
 EstimatedDuration=Estimated duration
-EstimatedDurationDesc=Estimated duration to manufacture this product using this BOM
+EstimatedDurationDesc=Estimated duration to manufacture (or disassemble) this product using this BOM
 ConfirmValidateBom=Are you sure you want to validate the BOM with the reference <strong>%s</strong> (you will be able to use it to build new Manufacturing Orders)
 ConfirmCloseBom=Are you sure you want to cancel this BOM (you won't be able to use it to build new Manufacturing Orders anymore) ?
 ConfirmReopenBom=Are you sure you want to re-open this BOM (you will be able to use it to build new Manufacturing Orders)
@@ -63,13 +63,14 @@ ConsumeAndProduceAll=Consume and Produce All
 Manufactured=Manufactured
 TheProductXIsAlreadyTheProductToProduce=The product to add is already the product to produce.
 ForAQuantityOf=For a quantity to produce of %s
+ForAQuantityToConsumeOf=For a quantity to disassemble of %s
 ConfirmValidateMo=Are you sure you want to validate this Manufacturing Order?
 ConfirmProductionDesc=By clicking on '%s', you will validate the consumption and/or production for the quantities set. This will also update the stock and record stock movements.
 ProductionForRef=Production of %s
 AutoCloseMO=Close automatically the Manufacturing Order if quantities to consume and to produce are reached
 NoStockChangeOnServices=No stock change on services
 ProductQtyToConsumeByMO=Product quantity still to consume by open MO
-ProductQtyToProduceByMO=Product quentity still to produce by open MO
+ProductQtyToProduceByMO=Product quantity still to produce by open MO
 AddNewConsumeLines=Add new line to consume
 ProductsToConsume=Products to consume
 ProductsToProduce=Products to produce
@@ -83,15 +84,13 @@ Workstations=Workstations
 WorkstationsDescription=Workstations management
 WorkstationSetup = Workstations setup
 WorkstationSetupPage = Workstations setup page
-WorkstationAbout = About Workstation
-WorkstationAboutPage = Workstations about page
 WorkstationList=Workstation list
 WorkstationCreate=Add new workstation
 ConfirmEnableWorkstation=Are you sure you want to enable workstation <b>%s</b> ?
 EnableAWorkstation=Enable a workstation
 ConfirmDisableWorkstation=Are you sure you want to disable workstation <b>%s</b> ?
 DisableAWorkstation=Disable a workstation
-DeleteWorkstation=Supprimer
+DeleteWorkstation=Delete
 NbOperatorsRequired=Number of operators required
 THMOperatorEstimated=Estimated operator THM
 THMMachineEstimated=Estimated machine THM

htdocs/langs/am_ET/orders.lang

@@ -11,6 +11,7 @@ OrderDate=Order date
 OrderDateShort=Order date
 OrderToProcess=Order to process
 NewOrder=New order
+NewSupplierOrderShort=New order
 NewOrderSupplier=New Purchase Order
 ToOrder=Make order
 MakeOrder=Make order
@@ -73,6 +74,7 @@ DeleteOrder=Delete order
 CancelOrder=Cancel order
 OrderReopened= Order %s re-open
 AddOrder=Create order
+AddSupplierOrderShort=Create order
 AddPurchaseOrder=Create purchase order
 AddToDraftOrders=Add to draft order
 ShowOrder=Show order

htdocs/langs/am_ET/other.lang

@@ -129,6 +129,7 @@ ClosedByLogin=User login who closed
 FileWasRemoved=File %s was removed
 DirWasRemoved=Directory %s was removed
 FeatureNotYetAvailable=Feature not yet available in the current version
+FeatureNotAvailableOnDevicesWithoutMouse=Feature not available on devices without mouse
 FeaturesSupported=Supported features
 Width=Width
 Height=Height
@@ -263,7 +264,7 @@ ContactCreatedByEmailCollector=Contact/address created by email collector from e
 ProjectCreatedByEmailCollector=Project created by email collector from email MSGID %s
 TicketCreatedByEmailCollector=Ticket created by email collector from email MSGID %s
 OpeningHoursFormatDesc=Use a - to separate opening and closing hours.<br>Use a space to enter different ranges.<br>Example: 8-12 14-18
-PrefixSession=Prefix for session ID
+SuffixSessionName=Suffix for session name
 
 ##### Export #####
 ExportsArea=Exports area

htdocs/langs/am_ET/partnership.lang

@@ -16,41 +16,72 @@
 #
 # Generic
 #
-ModulePartnershipName = Partnership management
+ModulePartnershipName=Partnership management
-PartnershipDescription = Module Partnership management
+PartnershipDescription=Module Partnership management
 PartnershipDescriptionLong= Module Partnership management
 
+AddPartnership=Add partnership
+CancelPartnershipForExpiredMembers=Partnership: Cancel partnership of members with expired subscriptions
+PartnershipCheckBacklink=Partnership: Check referring backlink
+
 #
 # Menu
 #
-NewPartnership = New Partnership
+NewPartnership=New Partnership
-ListOfPartnerships = List of partnership
+ListOfPartnerships=List of partnership
 
 #
 # Admin page
 #
-PartnershipSetup = Partnership setup
+PartnershipSetup=Partnership setup
-PartnershipAbout = About Partnership
+PartnershipAbout=About Partnership
-PartnershipAboutPage = Partnership about page
+PartnershipAboutPage=Partnership about page
-
+partnershipforthirdpartyormember=Partner status must be set on a 'thirdparty' or a 'member'
+PARTNERSHIP_IS_MANAGED_FOR=Partnership managed for
+PARTNERSHIP_BACKLINKS_TO_CHECK=Backlinks to check
+PARTNERSHIP_NBDAYS_AFTER_MEMBER_EXPIRATION_BEFORE_CANCEL=Nb of days before cancelling status of a partnership when a subscription has expired
+ReferingWebsiteCheck=Check of website referring
+ReferingWebsiteCheckDesc=You can enable a feature to check that your partners has added a backlink to your website domains on their own website.
 
 #
 # Object
 #
+DeletePartnership=Delete a partnership
+PartnershipDedicatedToThisThirdParty=Partnership dedicated to this third party
+PartnershipDedicatedToThisMember=Partnership dedicated to this member
 DatePartnershipStart=Start date
 DatePartnershipEnd=End date
+ReasonDecline=Decline reason
+ReasonDeclineOrCancel=Decline reason
+PartnershipAlreadyExist=Partnership already exist
+ManagePartnership=Manage partnership
+BacklinkNotFoundOnPartnerWebsite=Backlink not found on partner website
+ConfirmClosePartnershipAsk=Are you sure you want to cancel this partnership?
+PartnershipType=Partnership type
 
 #
 # Template Mail
 #
+SendingEmailOnPartnershipWillSoonBeCanceled=Partnership will soon be canceled
+SendingEmailOnPartnershipRefused=Partnership refused
+SendingEmailOnPartnershipAccepted=Partnership accepted
+SendingEmailOnPartnershipCanceled=Partnership canceled
 
+YourPartnershipWillSoonBeCanceledTopic=Partnership will soon be canceled
+YourPartnershipRefusedTopic=Partnership refused
+YourPartnershipAcceptedTopic=Partnership accepted
+YourPartnershipCanceledTopic=Partnership canceled
+
+YourPartnershipWillSoonBeCanceledContent=We inform you that your partnership will soon be canceled (Backlink not found)
+YourPartnershipRefusedContent=We inform you that your partnership request has been refused.
+YourPartnershipAcceptedContent=We inform you that your partnership request has been accepted.
+YourPartnershipCanceledContent=We inform you that your partnership has been canceled.
 
 #
 # Status
 #
-PartnershipDraft = Draft
+PartnershipDraft=Draft
-PartnershipAccepted = Accepted
+PartnershipAccepted=Accepted
-PartnershipRefused = Refused
+PartnershipRefused=Refused
-PartnershipCanceled = Canceled
+PartnershipCanceled=Canceled
-
 PartnershipManagedFor=Partners are

htdocs/langs/am_ET/productbatch.lang

@@ -1,4 +1,4 @@
-# ProductBATCH language file - en_US - ProductBATCH
+# ProductBATCH language file - Source file is en_US - ProductBATCH
 ManageLotSerial=Use lot/serial number
 ProductStatusOnBatch=Yes (lot required)
 ProductStatusOnSerial=Yes (unique serial number required)
@@ -33,3 +33,13 @@ CustomMasks=Adds an option to define mask in the product card
 LotProductTooltip=Adds an option in the product card to define a dedicated batch number mask
 SNProductTooltip=Adds an option in the product card to define a dedicated serial number mask
 QtyToAddAfterBarcodeScan=Qty to add for each barcode/lot/serial scanned
+LifeTime=Life span (in days)
+EndOfLife=End of life
+ManufacturingDate=Manufacturing date
+DestructionDate=Destruction date
+FirstUseDate=First use date
+QCFrequency=Quality control frequency (in days)
+
+#Traceability - qc status
+OutOfOrder=Out of order
+InWorkingOrder=In working order

htdocs/langs/am_ET/products.lang

@@ -396,3 +396,5 @@ ActionAvailableOnVariantProductOnly=Action only available on the variant of prod
 ProductsPricePerCustomer=Product prices per customers
 ProductSupplierExtraFields=Additional Attributes (Supplier Prices)
 DeleteLinkedProduct=Delete the child product linked to the combination
+PMPValue=Weighted average price
+PMPValueShort=WAP

htdocs/langs/am_ET/projects.lang

@@ -267,9 +267,11 @@ InvoiceToUse=Draft invoice to use
 NewInvoice=New invoice
 OneLinePerTask=One line per task
 OneLinePerPeriod=One line per period
+OneLinePerTimeSpentLine=One line for each time spent declaration
 RefTaskParent=Ref. Parent Task
 ProfitIsCalculatedWith=Profit is calculated using
 AddPersonToTask=Add also to tasks
 UsageOrganizeEvent=Usage: Event Organization
 PROJECT_CLASSIFY_CLOSED_WHEN_ALL_TASKS_DONE=Classify project as closed when all its tasks are completed (100%% progress)
 PROJECT_CLASSIFY_CLOSED_WHEN_ALL_TASKS_DONE_help=Note: existing projects with all tasks at 100 %% progress won't be affected: you will have to close them manually. This option only affects open projects.
+SelectLinesOfTimeSpentToInvoice=Select lines of time spent that are unbilled, then bulk action "Generate Invoice" to bill them

htdocs/langs/am_ET/receptions.lang

@@ -44,4 +44,4 @@ ValidateOrderFirstBeforeReception=You must first validate the order before being
 ReceptionsNumberingModules=Numbering module for receptions
 ReceptionsReceiptModel=Document templates for receptions
 NoMorePredefinedProductToDispatch=No more predefined products to dispatch
-
+ReceptionExist=A reception exists

htdocs/langs/am_ET/stocks.lang

@@ -56,8 +56,6 @@ UnitPurchaseValue=Unit purchase price
 StockTooLow=Stock too low
 StockLowerThanLimit=Stock lower than alert limit (%s)
 EnhancedValue=Value
-PMPValue=Weighted average price
-PMPValueShort=WAP
 EnhancedValueOfWarehouses=Warehouses value
 UserWarehouseAutoCreate=Create a user warehouse automatically when creating a user
 AllowAddLimitStockByWarehouse=Manage also value for minimum and desired stock per pairing (product-warehouse) in addition to the value for minimum and desired stock per product
@@ -251,7 +249,10 @@ SelectAStockMovementFileToImport=select a stock movement file to import
 InfoTemplateImport=Uploaded file needs to have this format (* are mandatory fields):<br>Source Warehouse* | Target Warehouse* | Product* | Quantity* | Lot/serial number<br>CSV character separator must be "<b>%s</b>"
 LabelOfInventoryMovemement=Inventory %s
 ReOpen=Reopen
-ConfirmFinish=Do you confirm the closing of the inventory ? This will generate all stock movements to update your stock.
+ConfirmFinish=Do you confirm the closing of the inventory ? This will generate all stock movements to update your stock to the real qty you entered into the inventory.
 ObjectNotFound=%s not found
 MakeMovementsAndClose=Generate movements and close
 AutofillWithExpected=Fill real quantity with expected quantity
+ShowAllBatchByDefault=By default, show batch details on product "stock" tab
+CollapseBatchDetailHelp=You can set batch detail default display in stocks module configuration
+FieldCannotBeNegative=Field "%s" cannot be negative

htdocs/langs/am_ET/ticket.lang

@@ -304,7 +304,7 @@ BoxLastModifiedTicket=Latest modified tickets
 BoxLastModifiedTicketDescription=Latest %s modified tickets
 BoxLastModifiedTicketContent=
 BoxLastModifiedTicketNoRecordedTickets=No recent modified tickets
-BoxTicketType=Number of open tickets by type
+BoxTicketType=Distribution of open tickets by type
 BoxTicketSeverity=Number of open tickets by severity
 BoxNoTicketSeverity=No tickets opened
 BoxTicketLastXDays=Number of new tickets by days the last %s days

htdocs/langs/ar_EG/accountancy.lang

@@ -1,2 +1,2 @@
 # Dolibarr language file - Source file is en_US - accountancy
-ACCOUNTANCY_COMBO_FOR_AUX=Enable combo list for subsidiary account (may be slow if you have a lot of third parties)
+ExportAccountingSourceDocHelp=With this tool, you can export the source events (list and PDFs) that were used to generate your accountancy. To export your journals, use the menu entry %s - %s.

htdocs/langs/ar_EG/cron.lang

@@ -1,2 +0,0 @@
-# Dolibarr language file - Source file is en_US - cron
-CronTaskInactive=This job is disabled

htdocs/langs/ar_EG/orders.lang

@@ -8,6 +8,7 @@ Orders=الطلبات
 OrderDateShort=تاريخ الأمر
 OrderToProcess=طلب تحت التشغيل
 NewOrder=أمر جديد
+NewSupplierOrderShort=أمر جديد
 ToOrder=إصدار أمر
 MakeOrder=إصدار أمر
 SuppliersOrders=أوامر الشراء

htdocs/langs/ar_EG/partnership.lang

@@ -1,4 +1,4 @@
 # Dolibarr language file - Source file is en_US - partnership
-PartnershipDraft =مسودة
+PartnershipDraft=مسودة
-PartnershipAccepted =مقبول
+PartnershipAccepted=مقبول
-PartnershipRefused =مرفوض
+PartnershipRefused=مرفوض

htdocs/langs/ar_EG/products.lang

@@ -0,0 +1,2 @@
+# Dolibarr language file - Source file is en_US - products
+ForceUpdateChildPriceSoc=Set same price on customer subsidiaries

htdocs/langs/ar_EG/ticket.lang

@@ -1,3 +1,4 @@
 # Dolibarr language file - Source file is en_US - ticket
 Closed=مقفول
 TicketSettings=الإعدادات
+TicketCategory=Group

htdocs/langs/ar_IQ/accountancy.lang

@@ -158,7 +158,7 @@ ACCOUNTING_LENGTH_AACCOUNT=Length of the third-party accounting accounts (If you
 ACCOUNTING_MANAGE_ZERO=Allow to manage different number of zeros at the end of an accounting account. Needed by some countries (like Switzerland). If set to off (default), you can set the following two parameters to ask the application to add virtual zeros.
 BANK_DISABLE_DIRECT_INPUT=Disable direct recording of transaction in bank account
 ACCOUNTING_ENABLE_EXPORT_DRAFT_JOURNAL=Enable draft export on journal
-ACCOUNTANCY_COMBO_FOR_AUX=Enable combo list for subsidiary account (may be slow if you have a lot of third parties)
+ACCOUNTANCY_COMBO_FOR_AUX=Enable combo list for subsidiary account (may be slow if you have a lot of third parties, break ability to search on a part of value)
 ACCOUNTING_DATE_START_BINDING=Define a date to start binding & transfer in accountancy. Below this date, the transactions will not be transferred to accounting.
 ACCOUNTING_DEFAULT_PERIOD_ON_TRANSFER=On accountancy transfer, select period show by default
 
@@ -328,6 +328,9 @@ ACCOUNTING_DISABLE_BINDING_ON_PURCHASES=Disable binding & transfer in accountanc
 ACCOUNTING_DISABLE_BINDING_ON_EXPENSEREPORTS=Disable binding & transfer in accountancy on expense reports (expense reports will not be taken into account in accounting)
 
 ## Export
+NotifiedExportDate=Notified export date (modification of the entries will not be possible)
+NotifiedValidationDate=Validation of the entries (modification or deletion of the entries will not be possible)
+ConfirmExportFile=Confirmation of the generation of the accounting export file ?
 ExportDraftJournal=Export draft journal
 Modelcsv=Model of export
 Selectmodelcsv=Select a model of export

htdocs/langs/ar_IQ/admin.lang

@@ -221,8 +221,8 @@ NotCompatible=This module does not seem compatible with your Dolibarr %s (Min %s
 CompatibleAfterUpdate=This module requires an update to your Dolibarr %s (Min %s - Max %s).
 SeeInMarkerPlace=See in Market place
 SeeSetupOfModule=See setup of module %s
+SetOptionTo=Set option <b>%s</b> to %s
 Updated=Updated
-Nouveauté=Novelty
 AchatTelechargement=Buy / Download
 GoModuleSetupArea=To deploy/install a new module, go to the Module setup area: <a href="%s">%s</a>.
 DoliStoreDesc=DoliStore, the official market place for Dolibarr ERP/CRM external modules
@@ -399,6 +399,7 @@ SecurityToken=Key to secure URLs
 NoSmsEngine=No SMS sender manager available. A SMS sender manager is not installed with the default distribution because they depend on an external vendor, but you can find some on %s
 PDF=PDF
 PDFDesc=Global options for PDF generation
+PDFOtherDesc=PDF Option specific to some modules
 PDFAddressForging=Rules for address section
 HideAnyVATInformationOnPDF=Hide all information related to Sales Tax / VAT
 PDFRulesForSalesTax=Rules for Sales Tax / VAT
@@ -561,7 +562,7 @@ Module53Desc=Management of Services
 Module54Name=Contracts/Subscriptions
 Module54Desc=Management of contracts (services or recurring subscriptions)
 Module55Name=Barcodes
-Module55Desc=Barcode management
+Module55Desc=Barcode or QR code management
 Module56Name=Payment by credit transfer
 Module56Desc=Management of payment of suppliers by Credit Transfer orders. It includes generation of SEPA file for European countries.
 Module57Name=Payments by Direct Debit
@@ -848,10 +849,10 @@ Permission402=Create/modify discounts
 Permission403=Validate discounts
 Permission404=Delete discounts
 Permission430=Use Debug Bar
-Permission511=Read payments of salaries (yours and subordinates)
+Permission511=Read salaries and payments (yours and subordinates)
-Permission512=Create/modify payments of salaries
+Permission512=Create/modify salaries and payments
-Permission514=Delete payments of salaries
+Permission514=Delete salaries and payments
-Permission517=Read payments of salaries of everybody
+Permission517=Read salaries and payments everybody
 Permission519=Export salaries
 Permission520=Read Loans
 Permission522=Create/modify loans
@@ -965,6 +966,8 @@ Permission23003=Delete Scheduled job
 Permission23004=Execute Scheduled job
 Permission50101=Use Point of Sale (SimplePOS)
 Permission50151=Use Point of Sale (TakePOS)
+Permission50152=Edit sales lines
+Permission50153=Edit ordered sales lines
 Permission50201=Read transactions
 Permission50202=Import transactions
 Permission50330=Read objects of Zapier
@@ -1039,11 +1042,12 @@ DictionaryMeasuringUnits=Measuring Units
 DictionarySocialNetworks=Social Networks
 DictionaryProspectStatus=Prospect status for companies
 DictionaryProspectContactStatus=Prospect status for contacts
-DictionaryHolidayTypes=Types of leave
+DictionaryHolidayTypes=Leave - Types of leave
 DictionaryOpportunityStatus=Lead status for project/lead
 DictionaryExpenseTaxCat=Expense report - Transportation categories
 DictionaryExpenseTaxRange=Expense report - Range by transportation category
 DictionaryTransportMode=Intracomm report - Transport mode
+DictionaryBatchStatus=Product lot/serial Quality Control status
 TypeOfUnit=Type of unit
 SetupSaved=Setup saved
 SetupNotSaved=Setup not saved
@@ -1187,7 +1191,7 @@ SetupDescription4=<a href="%s">%s -> %s</a><br><br>This software is a suite of m
 SetupDescription5=Other Setup menu entries manage optional parameters.
 AuditedSecurityEvents=Security events that are audited
 NoSecurityEventsAreAduited=No security events are audited. You can enable them from menu %s
-Audit=Audit
+Audit=Security events
 InfoDolibarr=About Dolibarr
 InfoBrowser=About Browser
 InfoOS=About OS
@@ -1319,9 +1323,12 @@ ConditionIsCurrently=Condition is currently %s
 YouUseBestDriver=You use driver %s which is the best driver currently available.
 YouDoNotUseBestDriver=You use driver %s but driver %s is recommended.
 NbOfObjectIsLowerThanNoPb=You have only %s %s in the database. This does not require any particular optimization.
+ComboListOptim=Combo list loading optimization
 SearchOptim=Search optimization
-YouHaveXObjectUseSearchOptim=You have %s %s in the database. You can add the constant %s to 1 in Home-Setup-Other. Limit the search to the beginning of strings which makes it possible for the database to use indexes and you should get an immediate response.
+YouHaveXObjectUseComboOptim=You have %s %s in the database. You can go into setup of module to enable loading of combo list on key pressed event.
-YouHaveXObjectAndSearchOptimOn=You have %s %s in the database and constant %s is set to 1 in Home-Setup-Other.
+YouHaveXObjectUseSearchOptim=You have %s %s in the database. You can add the constant %s to 1 in Home-Setup-Other.
+YouHaveXObjectUseSearchOptimDesc=This limits the search to the beginning of strings which makes it possible for the database to use indexes and you should get an immediate response.
+YouHaveXObjectAndSearchOptimOn=You have %s %s in the database and constant %s is set to %s in Home-Setup-Other.
 BrowserIsOK=You are using the %s web browser. This browser is ok for security and performance.
 BrowserIsKO=You are using the %s web browser. This browser is known to be a bad choice for security, performance and reliability. We recommend using Firefox, Chrome, Opera or Safari.
 PHPModuleLoaded=PHP component %s is loaded
@@ -1433,6 +1440,7 @@ MemberMainOptions=Main options
 AdherentLoginRequired= Manage a Login for each member
 AdherentMailRequired=Email required to create a new member
 MemberSendInformationByMailByDefault=Checkbox to send mail confirmation to members (validation or new subscription) is on by default
+MemberCreateAnExternalUserForSubscriptionValidated=Create an external user login for each new member subscription validated
 VisitorCanChooseItsPaymentMode=Visitor can choose from available payment modes
 MEMBER_REMINDER_EMAIL=Enable automatic reminder <b>by email</b> of expired subscriptions. Note: Module <strong>%s</strong> must be enabled and correctly setup to send reminders.
 MembersDocModules=Document templates for documents generated from member record
@@ -1763,7 +1771,7 @@ AGENDA_DEFAULT_VIEW=Which view do you want to open by default when selecting men
 AGENDA_REMINDER_BROWSER=Enable event reminder <b>on user's browser</b> (When remind date is reached, a popup is shown by the browser. Each user can disable such notifications from its browser notification setup).
 AGENDA_REMINDER_BROWSER_SOUND=Enable sound notification
 AGENDA_REMINDER_EMAIL=Enable event reminder <b>by emails</b> (remind option/delay can be defined on each event).
-AGENDA_REMINDER_EMAIL_NOTE=Note: The frequency of the task %s must be enough to be sure that the remind are sent at the correct moment.
+AGENDA_REMINDER_EMAIL_NOTE=Note: The frequency of the scheduled job %s must be enough to be sure that the remind are sent at the correct moment.
 AGENDA_SHOW_LINKED_OBJECT=Show linked object into agenda view
 ##### Clicktodial #####
 ClickToDialSetup=Click To Dial module setup
@@ -1979,6 +1987,8 @@ MAIN_PDF_MARGIN_RIGHT=Right margin on PDF
 MAIN_PDF_MARGIN_TOP=Top margin on PDF
 MAIN_PDF_MARGIN_BOTTOM=Bottom margin on PDF
 MAIN_DOCUMENTS_LOGO_HEIGHT=Height for logo on PDF
+MAIN_GENERATE_PROPOSALS_WITH_PICTURE=Add picture on proposal line
+MAIN_PDF_PROPAL_USE_ELECTRONIC_SIGNING=Add electronic sign in PDF
 NothingToSetup=There is no specific setup required for this module.
 SetToYesIfGroupIsComputationOfOtherGroups=Set this to yes if this group is a computation of other groups
 EnterCalculationRuleIfPreviousFieldIsYes=Enter calculation rule if previous field was set to Yes.<br>For example:<br>CODEGRP1+CODEGRP2
@@ -2096,7 +2106,6 @@ PDF_SHOW_PROJECT=Show project on document
 ShowProjectLabel=Project Label
 PDF_USE_ALSO_LANGUAGE_CODE=If you want to have some texts in your PDF duplicated in 2 different languages in the same generated PDF, you must set here this second language so generated PDF will contains 2 different languages in same page, the one chosen when generating PDF and this one (only few PDF templates support this). Keep empty for 1 language per PDF.
 FafaIconSocialNetworksDesc=Enter here the code of a FontAwesome icon. If you don't know what is FontAwesome, you can use the generic value fa-address-book.
-FeatureNotAvailableWithReceptionModule=Feature not available when module Reception is enabled
 RssNote=Note: Each RSS feed definition provides a widget that you must enable to have it available in dashboard
 JumpToBoxes=Jump to Setup -> Widgets
 MeasuringUnitTypeDesc=Use here a value like "size", "surface", "volume", "weight", "time"
@@ -2120,12 +2129,18 @@ ConfFileIsReadableOrWritableByAnyUsers=The conf file is readable or writable by
 MailToSendEventOrganization=Event Organization
 AGENDA_EVENT_DEFAULT_STATUS=Default event status when creating a event from the form
 YouShouldDisablePHPFunctions=You should disable PHP functions
-IfCLINotRequiredYouShouldDisablePHPFunctions=Except if you need to run system commands (for the module Scheduled job, or to run the external command line Anti-virus for example), you shoud disable PHP functions
+IfCLINotRequiredYouShouldDisablePHPFunctions=Except if you need to run system commands in custom code, you shoud disable PHP functions
+PHPFunctionsRequiredForCLI=For shell purpose (like scheduled job backup or running an anitivurs program), you must keep PHP functions
 NoWritableFilesFoundIntoRootDir=No writable files or directories of the common programs were found into your root directory (Good)
 RecommendedValueIs=Recommended: %s
+NotRecommended=Not recommanded
 ARestrictedPath=A restricted path
 CheckForModuleUpdate=Check for external modules updates
 CheckForModuleUpdateHelp=This action will connect to editors of external modules to check if a new version is available.
 ModuleUpdateAvailable=An update is available
 NoExternalModuleWithUpdate=No updates found for external modules
 SwaggerDescriptionFile=Swagger API description file (for use with redoc for example)
+YouEnableDeprecatedWSAPIsUseRESTAPIsInstead=You enabled deprecated WS API. You should use REST API instead.
+RandomlySelectedIfSeveral=Randomly selected if several pictures are available
+DatabasePasswordObfuscated=Database password is obfuscated in conf file
+DatabasePasswordNotObfuscated=Database password is NOT obfuscated in conf file

htdocs/langs/ar_IQ/agenda.lang

@@ -38,6 +38,7 @@ ActionsEvents=Events for which Dolibarr will create an action in agenda automati
 EventRemindersByEmailNotEnabled=Event reminders by email was not enabled into %s module setup.
 ##### Agenda event labels #####
 NewCompanyToDolibarr=Third party %s created
+COMPANY_MODIFYInDolibarr=Third party %s modified
 COMPANY_DELETEInDolibarr=Third party %s deleted
 ContractValidatedInDolibarr=Contract %s validated
 CONTRACT_DELETEInDolibarr=Contract %s deleted
@@ -87,6 +88,7 @@ OrderDeleted=Order deleted
 InvoiceDeleted=Invoice deleted
 DraftInvoiceDeleted=Draft invoice deleted
 CONTACT_CREATEInDolibarr=Contact %s created
+CONTACT_MODIFYInDolibarr=Contact %s modified
 CONTACT_DELETEInDolibarr=Contact %s deleted
 PRODUCT_CREATEInDolibarr=Product %s created
 PRODUCT_MODIFYInDolibarr=Product %s modified

htdocs/langs/ar_IQ/bills.lang

@@ -259,6 +259,7 @@ DateMaxPayment=Payment due on
 DateInvoice=Invoice date
 DatePointOfTax=Point of tax
 NoInvoice=No invoice
+NoOpenInvoice=No open invoice
 ClassifyBill=Classify invoice
 SupplierBillsToPay=Unpaid vendor invoices
 CustomerBillsUnpaid=Unpaid customer invoices
@@ -589,3 +590,4 @@ FacParentLine=Invoice Line Parent
 SituationTotalRayToRest=Remainder to pay without taxe
 PDFSituationTitle=Situation n° %d
 SituationTotalProgress=Total progress %d %%
+SearchUnpaidInvoicesWithDueDate=Search unpaid invoices with a due date = %s

htdocs/langs/ar_IQ/cashdesk.lang

@@ -102,7 +102,7 @@ CashDeskGenericMaskCodes6 = <br><b>{TN}</b> tag is used to add the terminal numb
 TakeposGroupSameProduct=Group same products lines
 StartAParallelSale=Start a new parallel sale
 SaleStartedAt=Sale started at %s
-ControlCashOpening=Control cash popup at opening POS
+ControlCashOpening=Open the "Control cash" popup when opening the POS
 CloseCashFence=Close cash desk control
 CashReport=Cash report
 MainPrinterToUse=Main printer to use
@@ -126,5 +126,5 @@ ModuleReceiptPrinterMustBeEnabled=Module Receipt printer must have been enabled
 AllowDelayedPayment=Allow delayed payment
 PrintPaymentMethodOnReceipts=Print payment method on tickets|receipts
 WeighingScale=Weighing scale
-ShowPriceHT = Display the price excluding tax column
+ShowPriceHT = Display the column with the price excluding tax (on screen)
-ShowPriceHTOnReceipt = Display the price excluding tax column on receipt
+ShowPriceHTOnReceipt = Display the column with the price excluding tax (on receipt)

htdocs/langs/ar_IQ/compta.lang

@@ -286,3 +286,9 @@ ReportPurchaseTurnover=Purchase turnover invoiced
 ReportPurchaseTurnoverCollected=Purchase turnover collected
 IncludeVarpaysInResults = Include various payments in reports
 IncludeLoansInResults = Include loans in reports
+InvoiceLate30Days = Invoices late > 30 days
+InvoiceLate15Days = Invoices late > 15 days
+InvoiceLateMinus15Days = Invoices late
+InvoiceNotLate = To be collected < 15 days
+InvoiceNotLate15Days = To be collected in 15 days
+InvoiceNotLate30Days = To be collected in 30 days

htdocs/langs/ar_IQ/cron.lang

@@ -60,7 +60,7 @@ CronErrEndDateStartDt=End date cannot be before start date
 StatusAtInstall=Status at module installation
 CronStatusActiveBtn=Schedule
 CronStatusInactiveBtn=Disable
-CronTaskInactive=This job is disabled
+CronTaskInactive=This job is disabled (not scheduled)
 CronId=Id
 CronClassFile=Filename with class
 CronModuleHelp=Name of Dolibarr module directory (also work with external Dolibarr module). <BR> For example to call the fetch method of Dolibarr Product object /htdocs/<u>product</u>/class/product.class.php, the value for module is<br><i>product</i>

htdocs/langs/ar_IQ/errors.lang

@@ -11,6 +11,7 @@ ErrorBadValueForParamNotAString=Bad value for your parameter. It appends general
 ErrorRefAlreadyExists=Reference <b>%s</b> already exists.
 ErrorLoginAlreadyExists=Login %s already exists.
 ErrorGroupAlreadyExists=Group %s already exists.
+ErrorEmailAlreadyExists=Email %s already exists.
 ErrorRecordNotFound=Record not found.
 ErrorFailToCopyFile=Failed to copy file '<b>%s</b>' into '<b>%s</b>'.
 ErrorFailToCopyDir=Failed to copy directory '<b>%s</b>' into '<b>%s</b>'.
@@ -117,7 +118,7 @@ ErrorCantReadFile=Failed to read file '%s'
 ErrorCantReadDir=Failed to read directory '%s'
 ErrorBadLoginPassword=Bad value for login or password
 ErrorLoginDisabled=Your account has been disabled
-ErrorFailedToRunExternalCommand=Failed to run external command. Check it is available and runnable by your PHP server. If PHP <b>Safe Mode</b> is enabled, check that command is inside a directory defined by parameter <b>safe_mode_exec_dir</b>.
+ErrorFailedToRunExternalCommand=Failed to run external command. Check it is available and runnable by your PHP server user. Check also the command is not protected on shell level by a security layer like apparmor.
 ErrorFailedToChangePassword=Failed to change password
 ErrorLoginDoesNotExists=User with login <b>%s</b> could not be found.
 ErrorLoginHasNoEmail=This user has no email address. Process aborted.
@@ -262,6 +263,7 @@ ErrorDateIsInFuture=Error, the date can't be in the future
 ErrorAnAmountWithoutTaxIsRequired=Error, amount is mandatory
 ErrorAPercentIsRequired=Error, please fill in the percentage correctly
 ErrorYouMustFirstSetupYourChartOfAccount=You must first setup your chart of account
+ErrorFailedToFindEmailTemplate=Failed to find template with code name %s
 
 # Warnings
 WarningParamUploadMaxFileSizeHigherThanPostMaxSize=Your PHP parameter upload_max_filesize (%s) is higher than PHP parameter post_max_size (%s). This is not a consistent setup.
@@ -298,3 +300,4 @@ WarningModuleXDisabledSoYouMayMissEventHere=Module %s has not been enabled. So y
 ErrorActionCommPropertyUserowneridNotDefined=User's owner is required
 ErrorActionCommBadType=Selected event type (id: %n, code: %s) do not exist in Event Type dictionary
 CheckVersionFail=Version check fail
+ErrorWrongFileName=Name of the file cannot have __SOMETHING__ in it

htdocs/langs/ar_IQ/eventorganization.lang

@@ -1,4 +1,5 @@
 # Copyright (C) 2021		Florian Henry			<florian.henry@scopen.fr>
+# Copyright (C) 2021		Dorian Vabre			<dorian.vabre@gmail.com>
 #
 # This program is free software: you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -81,7 +82,10 @@ PriceOfBoothHelp=Subscription price to stand a booth
 EventOrganizationICSLink=Link ICS for events
 ConferenceOrBoothInformation=Conference Or Booth informations
 Attendees = Attendees
+DownloadICSLink = Download ICS link
 EVENTORGANIZATION_SECUREKEY = Secure Key of the public registration link to a conference
+SERVICE_BOOTH_LOCATION = Service used for the invoice row about a booth location
+SERVICE_CONFERENCE_ATTENDEE_SUBSCRIPTION = Service used for the invoice row about an attendee subscription to a conference
 #
 # Status
 #
@@ -94,8 +98,46 @@ EvntOrgCancelled = Cancelled
 #
 # Public page
 #
+SuggestForm = Suggestion page
+RegisterPage = Page for conferences or booth
+EvntOrgRegistrationHelpMessage = Here, you can vote for an event, or suggest a new conference or booth for the project
+EvntOrgRegistrationConfHelpMessage = Here, you can suggest a new conference for the project
+EvntOrgRegistrationBoothHelpMessage = Here, you can suggest a new booth for the project
+ListOfSuggestedConferences = List of suggested conferences
+ListOfSuggestedBooths = List of suggested booths
+SuggestConference = Suggest a new conference
+SuggestBooth = Suggest a booth
+ViewAndVote = View and vote for suggested events
 PublicAttendeeSubscriptionPage = Public link of registration to a conference
 MissingOrBadSecureKey = The security key is invalid or missing
-EvntOrgWelcomeMessage = This form allows you to register as a new participant to the conference
+EvntOrgWelcomeMessage = This form allows you to register as a new participant to the conference : '%s'
-EvntOrgStartDuration = This conference starts on
+EvntOrgDuration = This conference starts on %s and ends on %s.
-EvntOrgEndDuration =  and ends on
+ConferenceAttendeeFee = Conference attendee fee for the event : '%s' occurring from %s to %s.
+BoothLocationFee = Booth location for the event : '%s' occurring from %s to %s
+EventType = Event type
+
+#
+# Vote page
+#
+EvntOrgRegistrationWelcomeMessage = Welcome on the conference or booth suggestion page.
+EvntOrgRegistrationConfWelcomeMessage = Welcome on the conference suggestion page.
+EvntOrgRegistrationBoothWelcomeMessage = Welcome on the booth suggestion page.
+EvntOrgVoteHelpMessage = Here, you can view and vote for the suggested events for the project
+VoteOk = Your vote has been accepted.
+AlreadyVoted = You have already voted for this event.
+VoteError = An error has occurred during the vote, please try again.
+
+#
+# SubscriptionOk page
+#
+SubscriptionOk = Your subscription to this conference has been validated
+#
+# Subscription validation mail
+#
+ConfAttendeeSubscriptionConfirmation = Confirmation of your subscription to a conference
+#
+# Payment page
+#
+Attendee = Attendee
+PaymentConferenceAttendee = Conference attendee payment
+PaymentBoothLocation = Booth location payment

htdocs/langs/ar_IQ/hrm.lang

@@ -9,7 +9,7 @@ ConfirmDeleteEstablishment=Are you sure you wish to delete this establishment?
 OpenEtablishment=Open establishment
 CloseEtablishment=Close establishment
 # Dictionary
-DictionaryPublicHolidays=HRM - Public holidays
+DictionaryPublicHolidays=Leave - Public holidays
 DictionaryDepartment=HRM - Department list
 DictionaryFunction=HRM - Job positions
 # Module

htdocs/langs/ar_IQ/knowledgemanagement.lang

@@ -47,7 +47,7 @@ KnowledgeManagementArea = Knowledge Management
 # Menu
 #
 MenuKnowledgeRecord = Knowledge base
-ListOfArticles = List of articles
+ListKnowledgeRecord = List of articles
 NewKnowledgeRecord = New article
 ValidateReply = Validate solution
 KnowledgeRecords = Articles

htdocs/langs/ar_IQ/languages.lang

@@ -3,6 +3,7 @@ Language_am_ET=Ethiopian
 Language_ar_AR=Arabic
 Language_ar_EG=Arabic (Egypt)
 Language_ar_SA=Arabic
+Language_ar_TN=Arabic (Tunisia)
 Language_az_AZ=Azerbaijani
 Language_bn_BD=Bengali
 Language_bn_IN=Bengali (India)
@@ -84,6 +85,7 @@ Language_nl_NL=Dutch
 Language_pl_PL=Polish
 Language_pt_BR=Portuguese (Brazil)
 Language_pt_PT=Portuguese
+Language_ro_MD=Romanian (Moldavia)
 Language_ro_RO=Romanian
 Language_ru_RU=Russian
 Language_ru_UA=Russian (Ukraine)

htdocs/langs/ar_IQ/main.lang

@@ -430,6 +430,7 @@ LT1IN=CGST
 LT2IN=SGST
 LT1GC=Additionnal cents
 VATRate=Tax Rate
+RateOfTaxN=Rate of tax %s
 VATCode=Tax Rate code
 VATNPR=Tax Rate NPR
 DefaultTaxRate=Default tax rate
@@ -729,6 +730,7 @@ MenuMembers=Members
 MenuAgendaGoogle=Google agenda
 MenuTaxesAndSpecialExpenses=Taxes | Special expenses
 ThisLimitIsDefinedInSetup=Dolibarr limit (Menu home-setup-security): %s Kb, PHP limit: %s Kb
+ThisLimitIsDefinedInSetupAt=Dolibarr limit (Menu %s): %s Kb, PHP limit (Param %s): %s Kb
 NoFileFound=No documents uploaded
 CurrentUserLanguage=Current language
 CurrentTheme=Current theme
@@ -1072,6 +1074,7 @@ ValidFrom=Valid from
 ValidUntil=Valid until
 NoRecordedUsers=No users
 ToClose=To close
+ToRefuse=To refuse
 ToProcess=To process
 ToApprove=To approve
 GlobalOpenedElemView=Global view
@@ -1126,9 +1129,11 @@ UpdateForAllLines=Update for all lines
 OnHold=On hold
 Civility=Civility
 AffectTag=Affect Tag
+CreateExternalUser=Create external user
 ConfirmAffectTag=Bulk Tag Affect
 ConfirmAffectTagQuestion=Are you sure you want to affect tags to the %s selected record(s)?
 CategTypeNotFound=No tag type found for type of records
 CopiedToClipboard=Copied to clipboard
 InformationOnLinkToContract=This amount is only the total of all the lines of the contract. No notion of time is taken into consideration.
 ConfirmCancel=Are you sure you want to cancel
+EmailMsgID=Email MsgID

htdocs/langs/ar_IQ/members.lang

@@ -213,3 +213,5 @@ SendReminderForExpiredSubscription=Send reminder by email to members when subscr
 MembershipPaid=Membership paid for current period (until %s)
 YouMayFindYourInvoiceInThisEmail=You may find your invoice attached to this email
 XMembersClosed=%s member(s) closed
+XExternalUserCreated=%s external user(s) created
+ForceMemberNature=Force member nature (Individual or Corporation)

htdocs/langs/ar_IQ/modulebuilder.lang

@@ -143,3 +143,4 @@ AsciiToHtmlConverter=Ascii to HTML converter
 AsciiToPdfConverter=Ascii to PDF converter
 TableNotEmptyDropCanceled=Table not empty. Drop has been canceled.
 ModuleBuilderNotAllowed=The module builder is available but not allowed to your user.
+ImportExportProfiles=Import and export profiles

htdocs/langs/ar_IQ/mrp.lang

@@ -13,7 +13,7 @@ BOMsSetup=Setup of module BOM
 ListOfBOMs=List of bills of material - BOM
 ListOfManufacturingOrders=List of Manufacturing Orders
 NewBOM=New bill of materials
-ProductBOMHelp=Product to create with this BOM.<br>Note: Products with the property 'Nature of product' = 'Raw material' are not visible into this list.
+ProductBOMHelp=Product to create (or disassemble) with this BOM.<br>Note: Products with the property 'Nature of product' = 'Raw material' are not visible into this list.
 BOMsNumberingModules=BOM numbering templates
 BOMsModelModule=BOM document templates
 MOsNumberingModules=MO numbering templates
@@ -39,7 +39,7 @@ DateStartPlannedMo=Date start planned
 DateEndPlannedMo=Date end planned
 KeepEmptyForAsap=Empty means 'As Soon As Possible'
 EstimatedDuration=Estimated duration
-EstimatedDurationDesc=Estimated duration to manufacture this product using this BOM
+EstimatedDurationDesc=Estimated duration to manufacture (or disassemble) this product using this BOM
 ConfirmValidateBom=Are you sure you want to validate the BOM with the reference <strong>%s</strong> (you will be able to use it to build new Manufacturing Orders)
 ConfirmCloseBom=Are you sure you want to cancel this BOM (you won't be able to use it to build new Manufacturing Orders anymore) ?
 ConfirmReopenBom=Are you sure you want to re-open this BOM (you will be able to use it to build new Manufacturing Orders)
@@ -63,13 +63,14 @@ ConsumeAndProduceAll=Consume and Produce All
 Manufactured=Manufactured
 TheProductXIsAlreadyTheProductToProduce=The product to add is already the product to produce.
 ForAQuantityOf=For a quantity to produce of %s
+ForAQuantityToConsumeOf=For a quantity to disassemble of %s
 ConfirmValidateMo=Are you sure you want to validate this Manufacturing Order?
 ConfirmProductionDesc=By clicking on '%s', you will validate the consumption and/or production for the quantities set. This will also update the stock and record stock movements.
 ProductionForRef=Production of %s
 AutoCloseMO=Close automatically the Manufacturing Order if quantities to consume and to produce are reached
 NoStockChangeOnServices=No stock change on services
 ProductQtyToConsumeByMO=Product quantity still to consume by open MO
-ProductQtyToProduceByMO=Product quentity still to produce by open MO
+ProductQtyToProduceByMO=Product quantity still to produce by open MO
 AddNewConsumeLines=Add new line to consume
 ProductsToConsume=Products to consume
 ProductsToProduce=Products to produce

htdocs/langs/ar_IQ/orders.lang

@@ -11,6 +11,7 @@ OrderDate=Order date
 OrderDateShort=Order date
 OrderToProcess=Order to process
 NewOrder=New order
+NewSupplierOrderShort=New order
 NewOrderSupplier=New Purchase Order
 ToOrder=Make order
 MakeOrder=Make order
@@ -73,6 +74,7 @@ DeleteOrder=Delete order
 CancelOrder=Cancel order
 OrderReopened= Order %s re-open
 AddOrder=Create order
+AddSupplierOrderShort=Create order
 AddPurchaseOrder=Create purchase order
 AddToDraftOrders=Add to draft order
 ShowOrder=Show order

htdocs/langs/ar_IQ/other.lang

@@ -129,6 +129,7 @@ ClosedByLogin=User login who closed
 FileWasRemoved=File %s was removed
 DirWasRemoved=Directory %s was removed
 FeatureNotYetAvailable=Feature not yet available in the current version
+FeatureNotAvailableOnDevicesWithoutMouse=Feature not available on devices without mouse
 FeaturesSupported=Supported features
 Width=Width
 Height=Height
@@ -263,7 +264,7 @@ ContactCreatedByEmailCollector=Contact/address created by email collector from e
 ProjectCreatedByEmailCollector=Project created by email collector from email MSGID %s
 TicketCreatedByEmailCollector=Ticket created by email collector from email MSGID %s
 OpeningHoursFormatDesc=Use a - to separate opening and closing hours.<br>Use a space to enter different ranges.<br>Example: 8-12 14-18
-PrefixSession=Prefix for session ID
+SuffixSessionName=Suffix for session name
 
 ##### Export #####
 ExportsArea=Exports area

htdocs/langs/ar_IQ/partnership.lang

@@ -16,41 +16,72 @@
 #
 # Generic
 #
-ModulePartnershipName = Partnership management
+ModulePartnershipName=Partnership management
-PartnershipDescription = Module Partnership management
+PartnershipDescription=Module Partnership management
 PartnershipDescriptionLong= Module Partnership management
 
+AddPartnership=Add partnership
+CancelPartnershipForExpiredMembers=Partnership: Cancel partnership of members with expired subscriptions
+PartnershipCheckBacklink=Partnership: Check referring backlink
+
 #
 # Menu
 #
-NewPartnership = New Partnership
+NewPartnership=New Partnership
-ListOfPartnerships = List of partnership
+ListOfPartnerships=List of partnership
 
 #
 # Admin page
 #
-PartnershipSetup = Partnership setup
+PartnershipSetup=Partnership setup
-PartnershipAbout = About Partnership
+PartnershipAbout=About Partnership
-PartnershipAboutPage = Partnership about page
+PartnershipAboutPage=Partnership about page
-
+partnershipforthirdpartyormember=Partner status must be set on a 'thirdparty' or a 'member'
+PARTNERSHIP_IS_MANAGED_FOR=Partnership managed for
+PARTNERSHIP_BACKLINKS_TO_CHECK=Backlinks to check
+PARTNERSHIP_NBDAYS_AFTER_MEMBER_EXPIRATION_BEFORE_CANCEL=Nb of days before cancelling status of a partnership when a subscription has expired
+ReferingWebsiteCheck=Check of website referring
+ReferingWebsiteCheckDesc=You can enable a feature to check that your partners has added a backlink to your website domains on their own website.
 
 #
 # Object
 #
+DeletePartnership=Delete a partnership
+PartnershipDedicatedToThisThirdParty=Partnership dedicated to this third party
+PartnershipDedicatedToThisMember=Partnership dedicated to this member
 DatePartnershipStart=Start date
 DatePartnershipEnd=End date
+ReasonDecline=Decline reason
+ReasonDeclineOrCancel=Decline reason
+PartnershipAlreadyExist=Partnership already exist
+ManagePartnership=Manage partnership
+BacklinkNotFoundOnPartnerWebsite=Backlink not found on partner website
+ConfirmClosePartnershipAsk=Are you sure you want to cancel this partnership?
+PartnershipType=Partnership type
 
 #
 # Template Mail
 #
+SendingEmailOnPartnershipWillSoonBeCanceled=Partnership will soon be canceled
+SendingEmailOnPartnershipRefused=Partnership refused
+SendingEmailOnPartnershipAccepted=Partnership accepted
+SendingEmailOnPartnershipCanceled=Partnership canceled
 
+YourPartnershipWillSoonBeCanceledTopic=Partnership will soon be canceled
+YourPartnershipRefusedTopic=Partnership refused
+YourPartnershipAcceptedTopic=Partnership accepted
+YourPartnershipCanceledTopic=Partnership canceled
+
+YourPartnershipWillSoonBeCanceledContent=We inform you that your partnership will soon be canceled (Backlink not found)
+YourPartnershipRefusedContent=We inform you that your partnership request has been refused.
+YourPartnershipAcceptedContent=We inform you that your partnership request has been accepted.
+YourPartnershipCanceledContent=We inform you that your partnership has been canceled.
 
 #
 # Status
 #
-PartnershipDraft = Draft
+PartnershipDraft=Draft
-PartnershipAccepted = Accepted
+PartnershipAccepted=Accepted
-PartnershipRefused = Refused
+PartnershipRefused=Refused
-PartnershipCanceled = Canceled
+PartnershipCanceled=Canceled
-
 PartnershipManagedFor=Partners are

htdocs/langs/ar_IQ/productbatch.lang

@@ -1,4 +1,4 @@
-# ProductBATCH language file - en_US - ProductBATCH
+# ProductBATCH language file - Source file is en_US - ProductBATCH
 ManageLotSerial=Use lot/serial number
 ProductStatusOnBatch=Yes (lot required)
 ProductStatusOnSerial=Yes (unique serial number required)
@@ -33,3 +33,13 @@ CustomMasks=Adds an option to define mask in the product card
 LotProductTooltip=Adds an option in the product card to define a dedicated batch number mask
 SNProductTooltip=Adds an option in the product card to define a dedicated serial number mask
 QtyToAddAfterBarcodeScan=Qty to add for each barcode/lot/serial scanned
+LifeTime=Life span (in days)
+EndOfLife=End of life
+ManufacturingDate=Manufacturing date
+DestructionDate=Destruction date
+FirstUseDate=First use date
+QCFrequency=Quality control frequency (in days)
+
+#Traceability - qc status
+OutOfOrder=Out of order
+InWorkingOrder=In working order

htdocs/langs/ar_IQ/products.lang

@@ -396,3 +396,5 @@ ActionAvailableOnVariantProductOnly=Action only available on the variant of prod
 ProductsPricePerCustomer=Product prices per customers
 ProductSupplierExtraFields=Additional Attributes (Supplier Prices)
 DeleteLinkedProduct=Delete the child product linked to the combination
+PMPValue=Weighted average price
+PMPValueShort=WAP

htdocs/langs/ar_IQ/projects.lang

@@ -267,9 +267,11 @@ InvoiceToUse=Draft invoice to use
 NewInvoice=New invoice
 OneLinePerTask=One line per task
 OneLinePerPeriod=One line per period
+OneLinePerTimeSpentLine=One line for each time spent declaration
 RefTaskParent=Ref. Parent Task
 ProfitIsCalculatedWith=Profit is calculated using
 AddPersonToTask=Add also to tasks
 UsageOrganizeEvent=Usage: Event Organization
 PROJECT_CLASSIFY_CLOSED_WHEN_ALL_TASKS_DONE=Classify project as closed when all its tasks are completed (100%% progress)
 PROJECT_CLASSIFY_CLOSED_WHEN_ALL_TASKS_DONE_help=Note: existing projects with all tasks at 100 %% progress won't be affected: you will have to close them manually. This option only affects open projects.
+SelectLinesOfTimeSpentToInvoice=Select lines of time spent that are unbilled, then bulk action "Generate Invoice" to bill them

htdocs/langs/ar_IQ/receptions.lang

@@ -44,4 +44,4 @@ ValidateOrderFirstBeforeReception=You must first validate the order before being
 ReceptionsNumberingModules=Numbering module for receptions
 ReceptionsReceiptModel=Document templates for receptions
 NoMorePredefinedProductToDispatch=No more predefined products to dispatch
-
+ReceptionExist=A reception exists

htdocs/langs/ar_IQ/stocks.lang

@@ -56,8 +56,6 @@ UnitPurchaseValue=Unit purchase price
 StockTooLow=Stock too low
 StockLowerThanLimit=Stock lower than alert limit (%s)
 EnhancedValue=Value
-PMPValue=Weighted average price
-PMPValueShort=WAP
 EnhancedValueOfWarehouses=Warehouses value
 UserWarehouseAutoCreate=Create a user warehouse automatically when creating a user
 AllowAddLimitStockByWarehouse=Manage also value for minimum and desired stock per pairing (product-warehouse) in addition to the value for minimum and desired stock per product
@@ -251,7 +249,10 @@ SelectAStockMovementFileToImport=select a stock movement file to import
 InfoTemplateImport=Uploaded file needs to have this format (* are mandatory fields):<br>Source Warehouse* | Target Warehouse* | Product* | Quantity* | Lot/serial number<br>CSV character separator must be "<b>%s</b>"
 LabelOfInventoryMovemement=Inventory %s
 ReOpen=Reopen
-ConfirmFinish=Do you confirm the closing of the inventory ? This will generate all stock movements to update your stock.
+ConfirmFinish=Do you confirm the closing of the inventory ? This will generate all stock movements to update your stock to the real qty you entered into the inventory.
 ObjectNotFound=%s not found
 MakeMovementsAndClose=Generate movements and close
 AutofillWithExpected=Fill real quantity with expected quantity
+ShowAllBatchByDefault=By default, show batch details on product "stock" tab
+CollapseBatchDetailHelp=You can set batch detail default display in stocks module configuration
+FieldCannotBeNegative=Field "%s" cannot be negative

htdocs/langs/ar_IQ/ticket.lang

@@ -304,7 +304,7 @@ BoxLastModifiedTicket=Latest modified tickets
 BoxLastModifiedTicketDescription=Latest %s modified tickets
 BoxLastModifiedTicketContent=
 BoxLastModifiedTicketNoRecordedTickets=No recent modified tickets
-BoxTicketType=Number of open tickets by type
+BoxTicketType=Distribution of open tickets by type
 BoxTicketSeverity=Number of open tickets by severity
 BoxNoTicketSeverity=No tickets opened
 BoxTicketLastXDays=Number of new tickets by days the last %s days

htdocs/langs/ar_SA/accountancy.lang

@@ -158,7 +158,7 @@ ACCOUNTING_LENGTH_AACCOUNT=طول حسابات الطرف الثالث المح
 ACCOUNTING_MANAGE_ZERO=السماح بإدارة عدد مختلف من الأصفار في نهاية الحساب المحاسبي. تحتاجه بعض الدول (مثل سويسرا). إذا تم الضبط على إيقاف (افتراضي) ، يمكنك تعيين المعاملين التاليتين لتطلب من التطبيق إضافة أصفار افتراضية.
 BANK_DISABLE_DIRECT_INPUT=تعطيل التسجيل المباشر للمعاملة في الحساب المصرفي
 ACCOUNTING_ENABLE_EXPORT_DRAFT_JOURNAL=تفعيل تصدير المسودة الى دفتر اليومية
-ACCOUNTANCY_COMBO_FOR_AUX=تمكين قائمة التحرير والسرد للحساب الفرعي (قد يكون بطيئًا إذا كان لديك الكثير من الأطراف الثالثة)
+ACCOUNTANCY_COMBO_FOR_AUX=Enable combo list for subsidiary account (may be slow if you have a lot of third parties, break ability to search on a part of value)
 ACCOUNTING_DATE_START_BINDING=تحديد موعد لبدء الربط والتحويل في المحاسبة. بعد هذا التاريخ ، لن يتم تحويل المعاملات إلى المحاسبة.
 ACCOUNTING_DEFAULT_PERIOD_ON_TRANSFER=في نقل المحاسبة ، حدد فترة العرض بشكل افتراضي
 
@@ -328,6 +328,9 @@ ACCOUNTING_DISABLE_BINDING_ON_PURCHASES=تعطيل الربط والتحويل
 ACCOUNTING_DISABLE_BINDING_ON_EXPENSEREPORTS=تعطيل الربط والتحويل في المحاسبة على تقارير المصروفات (لن يتم أخذ تقارير المصروفات في الاعتبار في المحاسبة)
 
 ## Export
+NotifiedExportDate=Notified export date (modification of the entries will not be possible)
+NotifiedValidationDate=Validation of the entries (modification or deletion of the entries will not be possible)
+ConfirmExportFile=Confirmation of the generation of the accounting export file ?
 ExportDraftJournal=تصدير مسودة دفتر اليومية
 Modelcsv=نموذج التصدير
 Selectmodelcsv=تحديد نموذج للتصدير

htdocs/langs/ar_SA/admin.lang

@@ -221,8 +221,8 @@ NotCompatible=This module does not seem compatible with your Dolibarr %s (Min %s
 CompatibleAfterUpdate=This module requires an update to your Dolibarr %s (Min %s - Max %s).
 SeeInMarkerPlace=See in Market place
 SeeSetupOfModule=انظر إعداد وحدة٪ الصورة
+SetOptionTo=Set option <b>%s</b> to %s
 Updated=Updated
-Nouveauté=Novelty
 AchatTelechargement=Buy / Download
 GoModuleSetupArea=To deploy/install a new module, go to the Module setup area: <a href="%s">%s</a>.
 DoliStoreDesc=DoliStore ، في السوق الرسمي لتخطيط موارد المؤسسات وحدات Dolibarr / خارجي إدارة علاقات العملاء
@@ -399,6 +399,7 @@ SecurityToken=المفتاح لعناوين المواقع الآمنة
 NoSmsEngine=لايوجد مدير إرسال الرسائل النصية القصيرة . مدير إرسال الرسائل النصية القصيرة غير مثبت بصورة اولية لانه يعتمد على مورد خارجي ، لكن يمكنك ايجاد واحد هنا %s
 PDF=صيغة المستندات المتنقلة
 PDFDesc=الخيارات العامة لتوليد ملفات صيغة المستندات المتنقلة
+PDFOtherDesc=PDF Option specific to some modules
 PDFAddressForging=Rules for address section
 HideAnyVATInformationOnPDF=Hide all information related to Sales Tax / VAT
 PDFRulesForSalesTax=Rules for Sales Tax / VAT
@@ -561,7 +562,7 @@ Module53Desc=Management of Services
 Module54Name=Contracts/Subscriptions
 Module54Desc=Management of contracts (services or recurring subscriptions)
 Module55Name=Barcodes
-Module55Desc=Barcodes إدارة
+Module55Desc=Barcode or QR code management
 Module56Name=الدفع عن طريق تحويل من الرصيد
 Module56Desc=Management of payment of suppliers by Credit Transfer orders. It includes generation of SEPA file for European countries.
 Module57Name=Payments by Direct Debit
@@ -848,10 +849,10 @@ Permission402=إنشاء / تعديل الخصومات
 Permission403=تحقق من الخصومات
 Permission404=حذف خصومات
 Permission430=Use Debug Bar
-Permission511=Read payments of salaries (yours and subordinates)
+Permission511=Read salaries and payments (yours and subordinates)
-Permission512=Create/modify payments of salaries
+Permission512=Create/modify salaries and payments
-Permission514=Delete payments of salaries
+Permission514=Delete salaries and payments
-Permission517=Read payments of salaries of everybody
+Permission517=Read salaries and payments everybody
 Permission519=رواتب التصدير
 Permission520=قراءة القروض
 Permission522=إنشاء / تعديل القروض
@@ -965,6 +966,8 @@ Permission23003=حذف مهمة مجدولة
 Permission23004=تنفيذ مهمة مجدولة
 Permission50101=Use Point of Sale (SimplePOS)
 Permission50151=Use Point of Sale (TakePOS)
+Permission50152=Edit sales lines
+Permission50153=Edit ordered sales lines
 Permission50201=قراءة المعاملات
 Permission50202=استيراد المعاملات
 Permission50330=Read objects of Zapier
@@ -1039,14 +1042,15 @@ DictionaryMeasuringUnits=Measuring Units
 DictionarySocialNetworks=Social Networks
 DictionaryProspectStatus=Prospect status for companies
 DictionaryProspectContactStatus=Prospect status for contacts
-DictionaryHolidayTypes=Types of leave
+DictionaryHolidayTypes=Leave - Types of leave
 DictionaryOpportunityStatus=Lead status for project/lead
 DictionaryExpenseTaxCat=Expense report - Transportation categories
 DictionaryExpenseTaxRange=Expense report - Range by transportation category
 DictionaryTransportMode=Intracomm report - Transport mode
+DictionaryBatchStatus=Product lot/serial Quality Control status
 TypeOfUnit=Type of unit
-SetupSaved=الإعداد المحفوظة
+SetupSaved=تم حفظ الإعدادات
-SetupNotSaved=Setup not saved
+SetupNotSaved=الإعدادات لم تحفظ
 BackToModuleList=Back to Module list
 BackToDictionaryList=Back to Dictionaries list
 TypeOfRevenueStamp=Type of tax stamp
@@ -1187,7 +1191,7 @@ SetupDescription4= <a href="%s"> %s -> %s </a> <br> <br> هذا البرنامج
 SetupDescription5=قائمة الإعدادات الأخرى تقوم بإدارة المعطيات الاختيارية.
 AuditedSecurityEvents=Security events that are audited
 NoSecurityEventsAreAduited=No security events are audited. You can enable them from menu %s
-Audit=المراجعة
+Audit=Security events
 InfoDolibarr=حول دوليبار
 InfoBrowser=حول المتصفح
 InfoOS=About OS
@@ -1319,9 +1323,12 @@ ConditionIsCurrently=الشرط هو حاليا %s
 YouUseBestDriver=You use driver %s which is the best driver currently available.
 YouDoNotUseBestDriver=You use driver %s but driver %s is recommended.
 NbOfObjectIsLowerThanNoPb=You have only %s %s in the database. This does not require any particular optimization.
+ComboListOptim=Combo list loading optimization
 SearchOptim=البحث الأمثل
-YouHaveXObjectUseSearchOptim=You have %s %s in the database. You can add the constant %s to 1 in Home-Setup-Other. Limit the search to the beginning of strings which makes it possible for the database to use indexes and you should get an immediate response.
+YouHaveXObjectUseComboOptim=You have %s %s in the database. You can go into setup of module to enable loading of combo list on key pressed event.
-YouHaveXObjectAndSearchOptimOn=You have %s %s in the database and constant %s is set to 1 in Home-Setup-Other.
+YouHaveXObjectUseSearchOptim=You have %s %s in the database. You can add the constant %s to 1 in Home-Setup-Other.
+YouHaveXObjectUseSearchOptimDesc=This limits the search to the beginning of strings which makes it possible for the database to use indexes and you should get an immediate response.
+YouHaveXObjectAndSearchOptimOn=You have %s %s in the database and constant %s is set to %s in Home-Setup-Other.
 BrowserIsOK=You are using the %s web browser. This browser is ok for security and performance.
 BrowserIsKO=You are using the %s web browser. This browser is known to be a bad choice for security, performance and reliability. We recommend using Firefox, Chrome, Opera or Safari.
 PHPModuleLoaded=PHP component %s is loaded
@@ -1433,6 +1440,7 @@ MemberMainOptions=الخيارات الرئيسية
 AdherentLoginRequired= إدارة تسجيل الدخول لكل عضو
 AdherentMailRequired=Email required to create a new member
 MemberSendInformationByMailByDefault=مربع لإرسال الرسائل للأعضاء تأكيدا على افتراضي
+MemberCreateAnExternalUserForSubscriptionValidated=Create an external user login for each new member subscription validated
 VisitorCanChooseItsPaymentMode=Visitor can choose from available payment modes
 MEMBER_REMINDER_EMAIL=Enable automatic reminder <b>by email</b> of expired subscriptions. Note: Module <strong>%s</strong> must be enabled and correctly setup to send reminders.
 MembersDocModules=Document templates for documents generated from member record
@@ -1763,7 +1771,7 @@ AGENDA_DEFAULT_VIEW=Which view do you want to open by default when selecting men
 AGENDA_REMINDER_BROWSER=Enable event reminder <b>on user's browser</b> (When remind date is reached, a popup is shown by the browser. Each user can disable such notifications from its browser notification setup).
 AGENDA_REMINDER_BROWSER_SOUND=Enable sound notification
 AGENDA_REMINDER_EMAIL=Enable event reminder <b>by emails</b> (remind option/delay can be defined on each event).
-AGENDA_REMINDER_EMAIL_NOTE=Note: The frequency of the task %s must be enough to be sure that the remind are sent at the correct moment.
+AGENDA_REMINDER_EMAIL_NOTE=Note: The frequency of the scheduled job %s must be enough to be sure that the remind are sent at the correct moment.
 AGENDA_SHOW_LINKED_OBJECT=Show linked object into agenda view
 ##### Clicktodial #####
 ClickToDialSetup=انقر لإعداد وحدة الاتصال الهاتفي
@@ -1979,6 +1987,8 @@ MAIN_PDF_MARGIN_RIGHT=الهامش الايمن لملفات صيغة المست
 MAIN_PDF_MARGIN_TOP=الهامش العلوي لصيغة المستندات المتنقلة
 MAIN_PDF_MARGIN_BOTTOM=الهامش العلوي لصيغة المستندات المتنقلة
 MAIN_DOCUMENTS_LOGO_HEIGHT=ارتفاع الشعار على صيغة المستندات المتنقلة
+MAIN_GENERATE_PROPOSALS_WITH_PICTURE=Add picture on proposal line
+MAIN_PDF_PROPAL_USE_ELECTRONIC_SIGNING=Add electronic sign in PDF
 NothingToSetup=There is no specific setup required for this module.
 SetToYesIfGroupIsComputationOfOtherGroups=Set this to yes if this group is a computation of other groups
 EnterCalculationRuleIfPreviousFieldIsYes=Enter calculation rule if previous field was set to Yes.<br>For example:<br>CODEGRP1+CODEGRP2
@@ -2096,7 +2106,6 @@ PDF_SHOW_PROJECT=Show project on document
 ShowProjectLabel=Project Label
 PDF_USE_ALSO_LANGUAGE_CODE=اذا كنت ترغب في تكرار بعض النصوص بلغتين مختلفتين  في ملفاتك المولدة بصيغة المستندات المتنقلة . يجب عليك ان ان تحدد اللغة الثانية هنا حتى يتسنى للملفات المولدة ان تحتوي على لغتين في نفس الصفحة . اللغة المختارة اثناء توليد المستند واللغة المختارة هنا (فقط بعض قوالب صيغة المستندات المتنقلة تدعم هذه الميزة) . ابق الخيار فارغاً للتوليد بلغة واحدة 
 FafaIconSocialNetworksDesc=Enter here the code of a FontAwesome icon. If you don't know what is FontAwesome, you can use the generic value fa-address-book.
-FeatureNotAvailableWithReceptionModule=Feature not available when module Reception is enabled
 RssNote=ملاحظة: كل تعريف لمصدر اخبار مختصرة يوفر بريمج يجب تفعيله ليكون متاحا في لوحة المعلومات
 JumpToBoxes=اذهب الى الاعدادت -> البريمجات
 MeasuringUnitTypeDesc=Use here a value like "size", "surface", "volume", "weight", "time"
@@ -2120,12 +2129,18 @@ ConfFileIsReadableOrWritableByAnyUsers=The conf file is readable or writable by
 MailToSendEventOrganization=Event Organization
 AGENDA_EVENT_DEFAULT_STATUS=Default event status when creating a event from the form
 YouShouldDisablePHPFunctions=You should disable PHP functions
-IfCLINotRequiredYouShouldDisablePHPFunctions=Except if you need to run system commands (for the module Scheduled job, or to run the external command line Anti-virus for example), you shoud disable PHP functions
+IfCLINotRequiredYouShouldDisablePHPFunctions=Except if you need to run system commands in custom code, you shoud disable PHP functions
+PHPFunctionsRequiredForCLI=For shell purpose (like scheduled job backup or running an anitivurs program), you must keep PHP functions
 NoWritableFilesFoundIntoRootDir=No writable files or directories of the common programs were found into your root directory (Good)
 RecommendedValueIs=Recommended: %s
+NotRecommended=Not recommanded
 ARestrictedPath=A restricted path
 CheckForModuleUpdate=Check for external modules updates
 CheckForModuleUpdateHelp=This action will connect to editors of external modules to check if a new version is available.
 ModuleUpdateAvailable=An update is available
 NoExternalModuleWithUpdate=No updates found for external modules
 SwaggerDescriptionFile=Swagger API description file (for use with redoc for example)
+YouEnableDeprecatedWSAPIsUseRESTAPIsInstead=You enabled deprecated WS API. You should use REST API instead.
+RandomlySelectedIfSeveral=Randomly selected if several pictures are available
+DatabasePasswordObfuscated=Database password is obfuscated in conf file
+DatabasePasswordNotObfuscated=Database password is NOT obfuscated in conf file

htdocs/langs/ar_SA/agenda.lang

@@ -4,7 +4,7 @@ Actions=الأحداث
 Agenda=جدول الأعمال
 TMenuAgenda=جدول الأعمال
 Agendas=جداول الأعمال
-LocalAgenda=التقويم الداخلي
+LocalAgenda=التقويم الافتراضي
 ActionsOwnedBy=الحدث مملوك بواسطة
 ActionsOwnedByShort=مالك
 AffectedTo=مخصص ل
@@ -14,13 +14,13 @@ EventsNb=عدد الأحداث
 ListOfActions=قائمة الأحداث
 EventReports=تقارير الحدث
 Location=الموقع
-ToUserOfGroup=Event assigned to any user in group
+ToUserOfGroup=حدث مخصص لأي مستخدم في المجموعة
 EventOnFullDay=الأحداث في كامل اليوم (أيام)
 MenuToDoActions=جميع الأحداث الغير مكتملة
 MenuDoneActions=جميع الأحداث الملغية
 MenuToDoMyActions=أحداثي الغير مكتملة
 MenuDoneMyActions=أحداثي الملغاة
-ListOfEvents=قائمة الأحداث (التقويم الداخلي)
+ListOfEvents=قائمة الأحداث (التقويم الافتراضي)
 ActionsAskedBy=أحداث تم إعداد التقرير عنها بواسطة
 ActionsToDoBy=أحداث عينت لـ
 ActionsDoneBy=أحداث تم اتمامها بواسطة
@@ -33,11 +33,12 @@ ViewPerType=العرض حسب النوع
 AutoActions= إكمال تلقائي
 AgendaAutoActionDesc= Here you may define events which you want Dolibarr to create automatically  in Agenda. If nothing is checked, only manual actions will be included in logs and displayed in Agenda. Automatic tracking of business actions done on objects (validation, status change) will not be saved.
 AgendaSetupOtherDesc= This page provides options to allow the export of your Dolibarr events into an external calendar (Thunderbird, Google Calendar etc...)
-AgendaExtSitesDesc=تسمح هذه الصفحة بإعلان المصادر الخارجية للتقاويم لمشاهدة أحداثها في جدول أعمال دوليبار.
+AgendaExtSitesDesc=تسمح هذه الصفحة بالإعلان عن المصادر الخارجية للتقويمات لرؤية أحداثها في جدول أعمال Dolibarr.
 ActionsEvents=الأحداث التي سيقوم دوليبار بإنشاء أعمال في جدول الأعمال بشكل تلقائي
 EventRemindersByEmailNotEnabled=Event reminders by email was not enabled into %s module setup.
 ##### Agenda event labels #####
 NewCompanyToDolibarr=تم إنشاء الطرف الثالث %s
+COMPANY_MODIFYInDolibarr=Third party %s modified
 COMPANY_DELETEInDolibarr=Third party %s deleted
 ContractValidatedInDolibarr=العقد%s  تم التأكد من صلاحيته
 CONTRACT_DELETEInDolibarr=Contract %s deleted
@@ -87,6 +88,7 @@ OrderDeleted=تم حذف الطلب
 InvoiceDeleted=تم حذف الفاتورة
 DraftInvoiceDeleted=Draft invoice deleted
 CONTACT_CREATEInDolibarr=Contact %s created
+CONTACT_MODIFYInDolibarr=Contact %s modified
 CONTACT_DELETEInDolibarr=Contact %s deleted
 PRODUCT_CREATEInDolibarr=المنتج %s تم انشاؤه
 PRODUCT_MODIFYInDolibarr=المنتج %sتم تعديلة
@@ -119,6 +121,7 @@ MRP_MO_UNVALIDATEInDolibarr=MO set to draft status
 MRP_MO_PRODUCEDInDolibarr=MO produced
 MRP_MO_DELETEInDolibarr=MO deleted
 MRP_MO_CANCELInDolibarr=MO canceled
+PAIDInDolibarr=%s paid
 ##### End agenda events #####
 AgendaModelModule=نماذج المستندات للحدث
 DateActionStart=تاريخ البدء
@@ -130,7 +133,7 @@ AgendaUrlOptions4=<b>لوجينت =%s</b> لتقييد الإخراج على ا
 AgendaUrlOptionsProject=<b>project=__PROJECT_ID__</b> to restrict output to actions linked to project <b>__PROJECT_ID__</b>.
 AgendaUrlOptionsNotAutoEvent=<b>notactiontype=systemauto</b> to exclude automatic events.
 AgendaUrlOptionsIncludeHolidays=<b>includeholidays=1</b> to include events of holidays.
-AgendaShowBirthdayEvents=عرض تواريخ ميلاد جهات الإتصال
+AgendaShowBirthdayEvents=Birthdays of contacts
 AgendaHideBirthdayEvents=إخفاء تواريخ ميلاد جهات الإتصال
 Busy=مشغول
 ExportDataset_event1=قائمة الأحداث في جدول الأعمال
@@ -152,6 +155,7 @@ ActionType=نوع الحدث
 DateActionBegin=تاريخ البدء الحدث
 ConfirmCloneEvent=هل انت متأكد انك ترغب في استنساخ الحدث <b>%s</b> ؟
 RepeatEvent=تكرار الحدث
+OnceOnly=Once only
 EveryWeek=كل اسبوع
 EveryMonth=كل شهر
 DayOfMonth=يوم من الشهر
@@ -165,4 +169,4 @@ TimeType=Duration type
 ReminderType=Callback type
 AddReminder=Create an automatic reminder notification for this event
 ErrorReminderActionCommCreation=Error creating the reminder notification for this event
-BrowserPush=Browser Notification
+BrowserPush=Browser Popup Notification

htdocs/langs/ar_SA/banks.lang

@@ -109,13 +109,13 @@ SocialContributionPayment=مدفوعات الضرائب الاجتماعية /
 BankTransfer=تحويل الرصيد
 BankTransfers=تحويلات الرصيد
 MenuBankInternalTransfer=حوالة داخلية
-TransferDesc=Use internal transfer to transfer from one account to another, the application will write two records: a debit in the source account and a credit in the target account. The same amount, label and date will be used for this transaction.
+TransferDesc=إستخدم التحويل الداخلي للتحويل من حساب الى اخر، سيقوم البرنامج بكتابة قيدين: قيد دائن في حساب المحول وقيد مدين في حساب المستلم. يستخدم نفس المبلغ والعنوان والتاريخ في المعاملة.
 TransferFrom=من
 TransferTo=إلى
 TransferFromToDone=التحويل من <b>%s</b>إلى <b>%s</b>من <b>%s</b>%s قد تم تسجيلة.
 CheckTransmitter=مرسل
 ValidateCheckReceipt=تأكيد صحة الشيك المستلم؟
-ConfirmValidateCheckReceipt=Are you sure that you want to submit this check receipt for validation? No changes are possible it's done.
+ConfirmValidateCheckReceipt=هل انت متأكد من رغبتك بإرسال إيصال هذا الشيك للتأكيد ؟ لا تغيير ممكن بعد الاكمال.
 DeleteCheckReceipt=حذف هذا الشيك ؟
 ConfirmDeleteCheckReceipt=هل انت متأكد أنك تريد حذف هذا الشيك؟
 BankChecks=الشيكات المصرفية
@@ -128,7 +128,7 @@ ConfirmDeleteTransaction=هل تريد بالتأكيد حذف هذه المعا
 ThisWillAlsoDeleteBankRecord=سيؤدي هذا أيضا إلى حذف القيد البنكي الذي تم إنشاؤه
 BankMovements=حركات
 PlannedTransactions=المعاملات المخططة
-Graph=Graphs
+Graph=الرسوم البيانية
 ExportDataset_banque_1=القيود البنكية وكشف الحساب
 ExportDataset_banque_2=قسيمة الإيداع
 TransactionOnTheOtherAccount=معاملة على الحساب الآخر
@@ -142,7 +142,7 @@ AllAccounts=جميع الحسابات المصرفية والنقدية
 BackToAccount=عودة إلى الحساب
 ShowAllAccounts=عرض لجميع الحسابات
 FutureTransaction=الصفقة المستقبلية. غير قادر على التسوية.
-SelectChequeTransactionAndGenerate=Select/filter the checks which are to be included in the check deposit receipt. Then, click on "Create".
+SelectChequeTransactionAndGenerate=قم بتحديد / تصفية الشيكات لتضمينها في إيصال إيداع الشيك واضغط على "إنشاء".
 InputReceiptNumber=اختيار كشف الحساب البنكي ذات الصلة مع التسوية. استخدام قيمة رقمية للفرز: شهر سنة أو يوم شهر سنة
 EventualyAddCategory=في نهاية المطاف، حدد الفئة التي لتصنيف السجلات
 ToConciliate=للتسوية؟
@@ -174,7 +174,7 @@ YourSEPAMandate=تفويض سيبا الخاص بك
 FindYourSEPAMandate=This is your SEPA mandate to authorize our company to make direct debit order to your bank. Return it signed (scan of the signed document) or send it by mail to
 AutoReportLastAccountStatement=قم تلقائيًا بتعبئة الحقل "رقم كشف الحساب البنكي" برقم كشف الحساب الأخير عند إجراء التسوية
 CashControl=مراقبة مكتب النقدية في نقاط البيع
-NewCashFence=New cash desk opening or closing
+NewCashFence=إفتتاح او إغلاق جديد لصنوق النقدية
 BankColorizeMovement=تلوين الحركات
 BankColorizeMovementDesc=إذا تم تمكين هذه الوظيفة ، يمكنك اختيار لون خلفية محدد لحركات الخصم أو الائتمان
 BankColorizeMovementName1=لون الخلفية لحركة الخصم

htdocs/langs/ar_SA/bills.lang

@@ -259,6 +259,7 @@ DateMaxPayment=السداد المستحق في
 DateInvoice=تاريخ الفاتورة
 DatePointOfTax=Point of tax
 NoInvoice=لا فاتورة
+NoOpenInvoice=No open invoice
 ClassifyBill=صنف كفاتورة
 SupplierBillsToPay=فواتير المورد الغير مسددة
 CustomerBillsUnpaid=فواتير العملاء غير المسددة
@@ -589,3 +590,4 @@ FacParentLine=أصل سطر الفاتورة
 SituationTotalRayToRest=ما تبقى للدفع بدون ضريبة
 PDFSituationTitle=Situation n° %d
 SituationTotalProgress=إجمالي التقدم %d %%
+SearchUnpaidInvoicesWithDueDate=Search unpaid invoices with a due date = %s

htdocs/langs/ar_SA/cashdesk.lang

@@ -102,7 +102,7 @@ CashDeskGenericMaskCodes6 = <br><b>{TN}</b> tag is used to add the terminal numb
 TakeposGroupSameProduct=Group same products lines
 StartAParallelSale=Start a new parallel sale
 SaleStartedAt=Sale started at %s
-ControlCashOpening=Control cash popup at opening POS
+ControlCashOpening=Open the "Control cash" popup when opening the POS
 CloseCashFence=Close cash desk control
 CashReport=Cash report
 MainPrinterToUse=Main printer to use
@@ -126,5 +126,5 @@ ModuleReceiptPrinterMustBeEnabled=Module Receipt printer must have been enabled
 AllowDelayedPayment=Allow delayed payment
 PrintPaymentMethodOnReceipts=Print payment method on tickets|receipts
 WeighingScale=Weighing scale
-ShowPriceHT = Display the price excluding tax column
+ShowPriceHT = Display the column with the price excluding tax (on screen)
-ShowPriceHTOnReceipt = Display the price excluding tax column on receipt
+ShowPriceHTOnReceipt = Display the column with the price excluding tax (on receipt)

htdocs/langs/ar_SA/commercial.lang

@@ -1,6 +1,6 @@
 # Dolibarr language file - Source file is en_US - commercial
-Commercial=Commerce
+Commercial=التجارة
-CommercialArea=Commerce area
+CommercialArea=منطقة التجارة
 Customer=العميل
 Customers=العملاء
 Prospect=احتمال
@@ -9,72 +9,73 @@ DeleteAction=حذف حدث
 NewAction=حدث جديد
 AddAction=إنشاء الحدث
 AddAnAction=إنشاء حدث
-AddActionRendezVous=إنشاء الحدث RENDEZ المفكرة
+AddActionRendezVous=اضافة حدث اتماعى او اجتماع
-ConfirmDeleteAction=Are you sure you want to delete this event?
+ConfirmDeleteAction=هل أنت متأكد من حذف هذا الحدث؟
-CardAction=بطاقة العمل
+CardAction=بطاقة الحدث
-ActionOnCompany=Related company
+ActionOnCompany=شركة ذات صلة
-ActionOnContact=Related contact
+ActionOnContact=جهة اتصال ذات صلة
-TaskRDVWith=لقاء مع ق ٪
+TaskRDVWith=لقاء مع %s
-ShowTask=وتظهر هذه المهمة
+ShowTask=عرض المهمة
-ShowAction=وتظهر العمل
+ShowAction=عرض الحدث
-ActionsReport=تقرير الأعمال
+ActionsReport=تقرير الأحداث
-ThirdPartiesOfSaleRepresentative=Thirdparties مع مندوب مبيعات
+ThirdPartiesOfSaleRepresentative=أطراف ثالثة مع مندوب مبيعات
-SaleRepresentativesOfThirdParty=Sales representatives of third party
+SaleRepresentativesOfThirdParty=مندوبي مبيعات الطرف الثالث
-SalesRepresentative=ممثل مبيعات
+SalesRepresentative=مندوب مبيعات
 SalesRepresentatives=مندوبي المبيعات
-SalesRepresentativeFollowUp=ممثل مبيعات (متابعة)
+SalesRepresentativeFollowUp=مندوب مبيعات (متابعة)
-SalesRepresentativeSignature=ممثل مبيعات (التوقيع)
+SalesRepresentativeSignature=مندوب مبيعات (توقيع)
-NoSalesRepresentativeAffected=أي ممثل مبيعات المتضررة
+NoSalesRepresentativeAffected=لم يتم تعيين مندوب مبيعات معين
-ShowCustomer=وتبين للعملاء
+ShowCustomer=عرض العميل
-ShowProspect=وتظهر احتمال
+ShowProspect=عرض العميل المحتمل
-ListOfProspects=قائمة التوقعات
+ListOfProspects=قائمة العملاء المحتملين
 ListOfCustomers=قائمة العملاء
-LastDoneTasks=Latest %s completed actions
+LastDoneTasks=أحدث %s إجراءات مكتملة
-LastActionsToDo=Oldest %s not completed actions
+LastActionsToDo=أقدم %s إجراءات غير مكتملة
-DoneAndToDoActions=ويتم القيام بمهام
+DoneAndToDoActions=الأحداث المنجزة والمهام المتبقية
-DoneActions=إجراءات عمله
+DoneActions=الأحداث المنجزة
-ToDoActions=عدم اكتمال الإجراءات
+ToDoActions=أحداث غير منجزة
-SendPropalRef=تقديم اقتراح التجاري٪ الصورة
+SendPropalRef=تقديم العرض التجاري لـ %s
-SendOrderRef=تقديم النظام %s
+SendOrderRef=تقديم طلب او امر لـ %s
 StatusNotApplicable=لا ينطبق
-StatusActionToDo=القيام
+StatusActionToDo=لكى يفعل
-StatusActionDone=فعل
+StatusActionDone=اكتمل
-StatusActionInProcess=في العملية
+StatusActionInProcess=تحت الانجاز
-TasksHistoryForThisContact=إجراءات لهذا الاتصال
+TasksHistoryForThisContact=أحداث لجهة الاتصال هذه
-LastProspectDoNotContact=لا اتصال
+LastProspectDoNotContact=لا تتصل
-LastProspectNeverContacted=اتصل أبدا
+LastProspectNeverContacted=لا تتصل ابدا
 LastProspectToContact=للاتصال
-LastProspectContactInProcess=في عملية الاتصال
+LastProspectContactInProcess=الاتصال قيد الانجاز
-LastProspectContactDone=الاتصال به
+LastProspectContactDone=تم الاتصال
-ActionAffectedTo=الحدث المخصصة ل
+ActionAffectedTo=تم تعيين الحدث لـ
-ActionDoneBy=العمل الذي قام به
+ActionDoneBy=تم تنفيذ الحدث بواسطة
 ActionAC_TEL=اتصال هاتفي
 ActionAC_FAX=إرسال فاكس
-ActionAC_PROP=إرسال اقتراح
+ActionAC_PROP=إرسال الاقتراح بالبريد
 ActionAC_EMAIL=ارسال بريد الكتروني
-ActionAC_EMAIL_IN=Reception of Email
+ActionAC_EMAIL_IN=استقبال البريد الإلكتروني
 ActionAC_RDV=اجتماعات
-ActionAC_INT=تدخل على الموقع
+ActionAC_INT=تدخل في الموقع
-ActionAC_FAC=ارسال الفواتير
+ActionAC_FAC=إرسال فاتورة العميل بالبريد
-ActionAC_REL=ارسال الفواتير (للتذكير)
+ActionAC_REL=إرسال فاتورة العميل بالبريد (تذكير)
 ActionAC_CLO=إغلاق
 ActionAC_EMAILING=إرسال البريد الإلكتروني الجماعي
-ActionAC_COM=Send sales order by mail
+ActionAC_COM=إرسال أمر المبيعات بالبريد
 ActionAC_SHIP=إرسال الشحن عن طريق البريد
-ActionAC_SUP_ORD=Send purchase order by mail
+ActionAC_SUP_ORD=إرسال أمر الشراء عن طريق البريد
-ActionAC_SUP_INV=Send vendor invoice by mail
+ActionAC_SUP_INV=إرسال فاتورة المورد بالبريد
 ActionAC_OTH=آخر
-ActionAC_OTH_AUTO=أحداث إدراجها تلقائيا
+ActionAC_OTH_AUTO=Other auto
-ActionAC_MANUAL=أحداث إدراجها يدويا
+ActionAC_MANUAL=الأحداث المدرجة يدويًا
-ActionAC_AUTO=أحداث إدراجها تلقائيا
+ActionAC_AUTO=الأحداث المدرجة تلقائيًا
-ActionAC_OTH_AUTOShort=Auto
+ActionAC_OTH_AUTOShort=الآخر
+ActionAC_EVENTORGANIZATION=حدث فعاليات للمنظمة
 Stats=إحصاءات المبيعات
 StatusProsp=احتمال وضع
 DraftPropals=صياغة مقترحات تجارية
 NoLimit=لا حدود
-ToOfferALinkForOnlineSignature=Link for online signature
+ToOfferALinkForOnlineSignature=رابط للتوقيع عبر الإنترنت
-WelcomeOnOnlineSignaturePage=Welcome to the page to accept commercial proposals from %s
+WelcomeOnOnlineSignaturePage=مرحبًا بك في الصفحة لقبول العروض التجارية من %s
-ThisScreenAllowsYouToSignDocFrom=This screen allow you to accept and sign, or refuse, a quote/commercial proposal
+ThisScreenAllowsYouToSignDocFrom=تسمح لك هذه الشاشة بقبول وتوقيع أو رفض عرض أسعار / عرض تجاري
-ThisIsInformationOnDocumentToSign=This is information on document to accept or refuse
+ThisIsInformationOnDocumentToSign=هذه معلومات على الوثيقة لقبولها أو رفضها
-SignatureProposalRef=Signature of quote/commercial proposal %s
+SignatureProposalRef=توقيع عرض الأسعار / العرض التجاري %s
-FeatureOnlineSignDisabled=Feature for online signing disabled or document generated before the feature was enabled
+FeatureOnlineSignDisabled=تم تعطيل ميزة التوقيع عبر الإنترنت أو تم إنشاء المستند قبل تمكين الميزة

htdocs/langs/ar_SA/compta.lang

@@ -286,3 +286,9 @@ ReportPurchaseTurnover=Purchase turnover invoiced
 ReportPurchaseTurnoverCollected=Purchase turnover collected
 IncludeVarpaysInResults = Include various payments in reports
 IncludeLoansInResults = Include loans in reports
+InvoiceLate30Days = Invoices late > 30 days
+InvoiceLate15Days = Invoices late > 15 days
+InvoiceLateMinus15Days = Invoices late
+InvoiceNotLate = To be collected < 15 days
+InvoiceNotLate15Days = To be collected in 15 days
+InvoiceNotLate30Days = To be collected in 30 days

htdocs/langs/ar_SA/cron.lang

@@ -60,7 +60,7 @@ CronErrEndDateStartDt=تاريخ نهاية لا يمكن أن يكون قبل
 StatusAtInstall=Status at module installation
 CronStatusActiveBtn=Schedule
 CronStatusInactiveBtn=يعطل
-CronTaskInactive=تم تعطيل هذه الوظائف
+CronTaskInactive=This job is disabled (not scheduled)
 CronId=هوية شخصية
 CronClassFile=Filename with class
 CronModuleHelp=Name of Dolibarr module directory (also work with external Dolibarr module). <BR> For example to call the fetch method of Dolibarr Product object /htdocs/<u>product</u>/class/product.class.php, the value for module is<br><i>product</i>

htdocs/langs/ar_SA/deliveries.lang

@@ -2,7 +2,7 @@
 Delivery=توصيل
 DeliveryRef=معرف التسليم
 DeliveryCard=بطاقة استلام
-DeliveryOrder=Delivery receipt
+DeliveryOrder=إيصال التسليم
 DeliveryDate=تاريخ التسليم او الوصول
 CreateDeliveryOrder=إنشاء إيصال الاستلام
 DeliveryStateSaved=تم حفظ حالة التسليم
@@ -18,14 +18,15 @@ StatusDeliveryCanceled=ألغيت
 StatusDeliveryDraft=مسودة
 StatusDeliveryValidated=تم الاستلام
 # merou PDF model
-NameAndSignature=Name and Signature:
+NameAndSignature=الاسم والتوقيع :
 ToAndDate=إلى ___________________________________ في ____ / _____ / __________
 GoodStatusDeclaration=تلقيت البضائع أعلاه في حالة جيدة،
-Deliverer=Deliverer:
+Deliverer=الموصل:
 Sender=مرسل
 Recipient=مستلم
 ErrorStockIsNotEnough=ليس هناك مخزون كاف
 Shippable=قابل للشحن
 NonShippable=غير قابل للشحن
+ShowShippableStatus=إظهار علامة قابل للشحن
 ShowReceiving=عرض إيصال الاستلام
-NonExistentOrder=Nonexistent order
+NonExistentOrder=امر غير موجود

htdocs/langs/ar_SA/donations.lang

@@ -6,7 +6,7 @@ Donor=الجهات المانحة
 AddDonation=إنشاء التبرع
 NewDonation=منحة جديدة
 DeleteADonation=حذف التبرع
-ConfirmDeleteADonation=Are you sure you want to delete this donation?
+ConfirmDeleteADonation=هل أنت متأكد أنك تريد حذف هذا التبرع؟
 PublicDonation=تبرع العامة
 DonationsArea=التبرعات المنطقة
 DonationStatusPromiseNotValidated=مشروع وعد
@@ -16,7 +16,7 @@ DonationStatusPromiseNotValidatedShort=مسودة
 DonationStatusPromiseValidatedShort=صادق
 DonationStatusPaidShort=وردت
 DonationTitle=استلام التبرع
-DonationDate=Donation date
+DonationDate=تاريخ التبرع
 DonationDatePayment=تاريخ الدفع
 ValidPromess=التحقق من صحة الوعد
 DonationReceipt=استلام التبرع
@@ -31,4 +31,5 @@ DONATION_ART200=تبين المادة 200 من CGI إذا كنت تشعر بال
 DONATION_ART238=تبين المادة 238 من CGI إذا كنت تشعر بالقلق
 DONATION_ART885=تبين المادة 885 من CGI إذا كنت تشعر بالقلق
 DonationPayment=دفع التبرع
-DonationValidated=Donation %s validated
+DonationValidated=تم تأكيد التبرع %s
+DonationUseThirdparties=إستخدام طرف ثالث موجود كمنسق للمتبرعين

htdocs/langs/ar_SA/errors.lang

@@ -11,6 +11,7 @@ ErrorBadValueForParamNotAString=Bad value for your parameter. It appends general
 ErrorRefAlreadyExists=Reference <b>%s</b> already exists.
 ErrorLoginAlreadyExists=ادخل ٪ ق موجود بالفعل.
 ErrorGroupAlreadyExists=المجموعة ٪ ق موجود بالفعل.
+ErrorEmailAlreadyExists=Email %s already exists.
 ErrorRecordNotFound=لم يتم العثور على السجل.
 ErrorFailToCopyFile=فشل في نسخ الملف <b>'%s'</b> إلى <b>'%s</b> &quot;.
 ErrorFailToCopyDir=Failed to copy directory '<b>%s</b>' into '<b>%s</b>'.
@@ -117,7 +118,7 @@ ErrorCantReadFile=فشل في قراءة الملف '%s'
 ErrorCantReadDir=فشل في قراءة '%s' الدليل
 ErrorBadLoginPassword=سيئة قيمة لتسجيل الدخول أو كلمة السر
 ErrorLoginDisabled=لقد تم تعطيل حسابك
-ErrorFailedToRunExternalCommand=فشل لتشغيل الأوامر الخارجية. التحقق من ذلك هو متاح وrunnable من قبل خادم PHP. إذا تم تمكين PHP <b>الوضع الآمن،</b> والتحقق من أن الأمر داخل دليل يحددها <b>safe_mode_exec_dir</b> المعلمة.
+ErrorFailedToRunExternalCommand=Failed to run external command. Check it is available and runnable by your PHP server user. Check also the command is not protected on shell level by a security layer like apparmor.
 ErrorFailedToChangePassword=فشل في تغيير كلمة السر
 ErrorLoginDoesNotExists=لا يستطيع المستخدم الدخول مع <b>%s</b> يمكن العثور عليها.
 ErrorLoginHasNoEmail=هذا المستخدم ليس لديه عنوان البريد الإلكتروني. إحباط عملية.
@@ -262,6 +263,7 @@ ErrorDateIsInFuture=Error, the date can't be in the future
 ErrorAnAmountWithoutTaxIsRequired=Error, amount is mandatory
 ErrorAPercentIsRequired=Error, please fill in the percentage correctly
 ErrorYouMustFirstSetupYourChartOfAccount=You must first setup your chart of account
+ErrorFailedToFindEmailTemplate=Failed to find template with code name %s
 
 # Warnings
 WarningParamUploadMaxFileSizeHigherThanPostMaxSize=Your PHP parameter upload_max_filesize (%s) is higher than PHP parameter post_max_size (%s). This is not a consistent setup.
@@ -298,3 +300,4 @@ WarningModuleXDisabledSoYouMayMissEventHere=Module %s has not been enabled. So y
 ErrorActionCommPropertyUserowneridNotDefined=User's owner is required
 ErrorActionCommBadType=Selected event type (id: %n, code: %s) do not exist in Event Type dictionary
 CheckVersionFail=Version check fail
+ErrorWrongFileName=Name of the file cannot have __SOMETHING__ in it

htdocs/langs/ar_SA/eventorganization.lang

@@ -1,4 +1,5 @@
 # Copyright (C) 2021		Florian Henry			<florian.henry@scopen.fr>
+# Copyright (C) 2021		Dorian Vabre			<dorian.vabre@gmail.com>
 #
 # This program is free software: you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -81,7 +82,10 @@ PriceOfBoothHelp=Subscription price to stand a booth
 EventOrganizationICSLink=Link ICS for events
 ConferenceOrBoothInformation=Conference Or Booth informations
 Attendees = Attendees
+DownloadICSLink = Download ICS link
 EVENTORGANIZATION_SECUREKEY = Secure Key of the public registration link to a conference
+SERVICE_BOOTH_LOCATION = Service used for the invoice row about a booth location
+SERVICE_CONFERENCE_ATTENDEE_SUBSCRIPTION = Service used for the invoice row about an attendee subscription to a conference
 #
 # Status
 #
@@ -94,8 +98,46 @@ EvntOrgCancelled = Cancelled
 #
 # Public page
 #
+SuggestForm = Suggestion page
+RegisterPage = Page for conferences or booth
+EvntOrgRegistrationHelpMessage = Here, you can vote for an event, or suggest a new conference or booth for the project
+EvntOrgRegistrationConfHelpMessage = Here, you can suggest a new conference for the project
+EvntOrgRegistrationBoothHelpMessage = Here, you can suggest a new booth for the project
+ListOfSuggestedConferences = List of suggested conferences
+ListOfSuggestedBooths = List of suggested booths
+SuggestConference = Suggest a new conference
+SuggestBooth = Suggest a booth
+ViewAndVote = View and vote for suggested events
 PublicAttendeeSubscriptionPage = Public link of registration to a conference
 MissingOrBadSecureKey = The security key is invalid or missing
-EvntOrgWelcomeMessage = This form allows you to register as a new participant to the conference
+EvntOrgWelcomeMessage = This form allows you to register as a new participant to the conference : '%s'
-EvntOrgStartDuration = This conference starts on
+EvntOrgDuration = This conference starts on %s and ends on %s.
-EvntOrgEndDuration =  and ends on
+ConferenceAttendeeFee = Conference attendee fee for the event : '%s' occurring from %s to %s.
+BoothLocationFee = Booth location for the event : '%s' occurring from %s to %s
+EventType = نوع الحدث
+
+#
+# Vote page
+#
+EvntOrgRegistrationWelcomeMessage = Welcome on the conference or booth suggestion page.
+EvntOrgRegistrationConfWelcomeMessage = Welcome on the conference suggestion page.
+EvntOrgRegistrationBoothWelcomeMessage = Welcome on the booth suggestion page.
+EvntOrgVoteHelpMessage = Here, you can view and vote for the suggested events for the project
+VoteOk = Your vote has been accepted.
+AlreadyVoted = You have already voted for this event.
+VoteError = An error has occurred during the vote, please try again.
+
+#
+# SubscriptionOk page
+#
+SubscriptionOk = Your subscription to this conference has been validated
+#
+# Subscription validation mail
+#
+ConfAttendeeSubscriptionConfirmation = Confirmation of your subscription to a conference
+#
+# Payment page
+#
+Attendee = Attendee
+PaymentConferenceAttendee = Conference attendee payment
+PaymentBoothLocation = Booth location payment

htdocs/langs/ar_SA/externalsite.lang

@@ -1,5 +1,5 @@
 # Dolibarr language file - Source file is en_US - externalsite
 ExternalSiteSetup=إعداد رابط لموقع خارجي
-ExternalSiteURL=External Site URL of HTML iframe content
+ExternalSiteURL=رابط موقع خارجي لمحتوى إطار داخلي في لغة توصيف النص التشعبي
 ExternalSiteModuleNotComplete=لم يتم تهيئة نموذج الموقع الخارجي بصورة صحيحة.
 ExampleMyMenuEntry=مُدخل قائمتي

htdocs/langs/ar_SA/hrm.lang

@@ -5,13 +5,13 @@ Establishments=مؤسسات
 Establishment=مؤسسة
 NewEstablishment=مؤسسة جديدة
 DeleteEstablishment=حذف المؤسسة
-ConfirmDeleteEstablishment=Are you sure you wish to delete this establishment?
+ConfirmDeleteEstablishment=هل انت متأكد أنك تريد حذف هذة المؤسسة ؟
 OpenEtablishment=فتح المؤسسة
 CloseEtablishment=إغلاق المؤسسة
 # Dictionary
-DictionaryPublicHolidays=HRM - Public holidays
+DictionaryPublicHolidays=الإجازات - الإجازات عامة
 DictionaryDepartment=إدارة الموارد البشرية - قائمة القسم
-DictionaryFunction=HRM - Job positions
+DictionaryFunction=إدارة الموارد البشرية - المسميات الوظيفية
 # Module
 Employees=الموظفين
 Employee=الموظف

htdocs/langs/ar_SA/knowledgemanagement.lang

@@ -47,7 +47,7 @@ KnowledgeManagementArea = Knowledge Management
 # Menu
 #
 MenuKnowledgeRecord = Knowledge base
-ListOfArticles = List of articles
+ListKnowledgeRecord = List of articles
 NewKnowledgeRecord = New article
 ValidateReply = Validate solution
 KnowledgeRecords = Articles

htdocs/langs/ar_SA/languages.lang

@@ -1,11 +1,12 @@
 # Dolibarr language file - Source file is en_US - languages
-Language_am_ET=Ethiopian
+Language_am_ET=إثيوبي
 Language_ar_AR=العربية
-Language_ar_EG=Arabic (Egypt)
+Language_ar_EG=العربية (مصر)
 Language_ar_SA=العربية
-Language_az_AZ=Azerbaijani
+Language_ar_TN=Arabic (Tunisia)
+Language_az_AZ=أذربيجان
 Language_bn_BD=بنغالي
-Language_bn_IN=Bengali (India)
+Language_bn_IN=البنغالية (الهند)
 Language_bg_BG=البلغارية
 Language_bs_BA=البوسنية
 Language_ca_ES=كاتالاني
@@ -23,7 +24,7 @@ Language_en_GB=الانجليزية (المملكة المتحدة)
 Language_en_IN=الإنكليزية (الهند)
 Language_en_NZ=الإنجليزية (نيوزيلندا)
 Language_en_SA=الإنجليزية (المملكة العربية السعودية)
-Language_en_SG=English (Singapore)
+Language_en_SG=الإنجليزية (سنغافورة)
 Language_en_US=الإنكليزية (الولايات المتحدة)
 Language_en_ZA=الإنكليزية (جنوب أفريقيا)
 Language_es_ES=الأسبانية
@@ -33,16 +34,16 @@ Language_es_CL=الإسبانية (تشيلي)
 Language_es_CO=الأسبانية (كولومبيا)
 Language_es_DO=الأسبانية (جمهورية الدومنيكان)
 Language_es_EC=الإسبانية (إكوادور)
-Language_es_GT=Spanish (Guatemala)
+Language_es_GT=الإسبانية (غواتيمالا)
 Language_es_HN=الأسبانية (هندوراس)
 Language_es_MX=الإسبانية (المكسيك)
 Language_es_PA=الإسبانية (بنما)
 Language_es_PY=الأسبانية (باراغواي)
 Language_es_PE=الإسبانية (بيرو)
 Language_es_PR=الأسبانية (بورتو ريكو)
-Language_es_US=Spanish (USA)
+Language_es_US=الإسبانية (الولايات المتحدة الأمريكية)
-Language_es_UY=Spanish (Uruguay)
+Language_es_UY=الإسبانية (أوروغواي)
-Language_es_GT=Spanish (Guatemala)
+Language_es_GT=الإسبانية (غواتيمالا)
 Language_es_VE=الإسبانية (فنزويلا)
 Language_et_EE=الإستونية
 Language_eu_ES=الباسكي
@@ -51,22 +52,22 @@ Language_fi_FI=اللغة الفنلندية
 Language_fr_BE=الفرنسية (بلجيكا)
 Language_fr_CA=الفرنسية (كندا)
 Language_fr_CH=الفرنسية (سويسرا)
-Language_fr_CI=French (Cost Ivory)
+Language_fr_CI=الفرنسية (ساحل العاج)
-Language_fr_CM=French (Cameroun)
+Language_fr_CM=الفرنسية (الكاميرون)
 Language_fr_FR=الفرنسية
-Language_fr_GA=French (Gabon)
+Language_fr_GA=الفرنسية (الجابون)
 Language_fr_NC=الفرنسية (كاليدونيا الجديدة)
-Language_fr_SN=French (Senegal)
+Language_fr_SN=الفرنسية (السنغال)
 Language_fy_NL=الفريزية
-Language_gl_ES=Galician
+Language_gl_ES=الجاليكية
 Language_he_IL=اللغة العبرية
-Language_hi_IN=Hindi (India)
+Language_hi_IN=الهندية (الهند)
 Language_hr_HR=الكرواتية
 Language_hu_HU=المجري
 Language_id_ID=الأندونيسية
 Language_is_IS=الآيسلندي
 Language_it_IT=الإيطالي
-Language_it_CH=Italian (Switzerland)
+Language_it_CH=الإيطالية (سويسرا)
 Language_ja_JP=اليابانية
 Language_ka_GE=الجورجية
 Language_km_KH=الخمير
@@ -78,12 +79,13 @@ Language_lv_LV=اللاتفية
 Language_mk_MK=المقدونية
 Language_mn_MN=المنغولية
 Language_nb_NO=النرويجية (بوكمال)
-Language_ne_NP=Nepali
+Language_ne_NP=النيبالية
 Language_nl_BE=الهولندية (بلجيكا)
-Language_nl_NL=Dutch
+Language_nl_NL=اللغة الهولندية
 Language_pl_PL=بولندي
 Language_pt_BR=البرتغالية (البرازيل)
 Language_pt_PT=البرتغالية
+Language_ro_MD=Romanian (Moldavia)
 Language_ro_RO=الرومانية
 Language_ru_RU=الروسية
 Language_ru_UA=الروسية (أوكرانيا)
@@ -101,5 +103,5 @@ Language_uz_UZ=الأوزبكي
 Language_vi_VN=الفيتنامية
 Language_zh_CN=الصينية
 Language_zh_TW=الصينية (التقليدية)
-Language_zh_HK=Chinese (Hong Kong)
+Language_zh_HK=الصينية (هونج كونج)
-Language_bh_MY=Malay
+Language_bh_MY=لغة الملايو

htdocs/langs/ar_SA/ldap.lang

@@ -1,27 +1,27 @@
 # Dolibarr language file - Source file is en_US - ldap
 YouMustChangePassNextLogon=كلمة السر للمستخدم <b>٪</b> على النطاق <b>ق ق ٪</b> ويجب أن يتغير.
 UserMustChangePassNextLogon=يجب على المستخدم تغيير كلمة المرور على المجال ق ٪
-LDAPInformationsForThisContact=المعلومات في قاعدة البيانات LDAP لهذا الاتصال
+LDAPInformationsForThisContact=المعلومات في قاعدة بيانات  خادم الوصول الخفيف للأدلة لهذا الاتصال
-LDAPInformationsForThisUser=المعلومات في قاعدة البيانات LDAP لهذا المستخدم
+LDAPInformationsForThisUser=المعلومات في قاعدة بيانات خادم الوصول الخفيف للأدلة لهذا المستخدم
-LDAPInformationsForThisGroup=المعلومات في قاعدة البيانات LDAP لهذه المجموعة
+LDAPInformationsForThisGroup=المعلومات في قاعدة بيانات خادم الوصول الخفيف للأدلة لهذه المجموعة
-LDAPInformationsForThisMember=المعلومات في قاعدة البيانات LDAP لهذا العضو
+LDAPInformationsForThisMember=المعلومات في قاعدة بيانات خادم الوصول الخفيف للأدلة لهذا العضو
-LDAPInformationsForThisMemberType=Information in LDAP database for this member type
+LDAPInformationsForThisMemberType=المعلومات في قاعدة بيانات خادم الوصول للأدلة الخفيق لنوع العضو
-LDAPAttributes=LDAP الصفات
+LDAPAttributes=خصائص خادم الوصول الخفيف للأدلة
-LDAPCard=بطاقة LDAP
+LDAPCard=بطاقة خادم الوصول الخفيف للأدلة
-LDAPRecordNotFound=سجل غير موجود في قاعدة البيانات LDAP
+LDAPRecordNotFound=سجل غير موجود في قاعدة بيانات خادم الوصول الخفيف للأدلة
-LDAPUsers=المستخدمين في قاعدة البيانات LDAP
+LDAPUsers=المستخدمين في قاعدة بيانات خادم الوصول الخفيف للأدلة
-LDAPFieldStatus=حالة
+LDAPFieldStatus=الحالة
-LDAPFieldFirstSubscriptionDate=أول موعد الاكتتاب
+LDAPFieldFirstSubscriptionDate=تاريخ اول إشتراك
-LDAPFieldFirstSubscriptionAmount=قبضة مبلغ الاشتراك
+LDAPFieldFirstSubscriptionAmount=مبلغ اول إشتراك
-LDAPFieldLastSubscriptionDate=Latest subscription date
+LDAPFieldLastSubscriptionDate=تاريخ اخر إشتراك
-LDAPFieldLastSubscriptionAmount=Latest subscription amount
+LDAPFieldLastSubscriptionAmount=مبلغ اخر إشتراك
-LDAPFieldSkype=Skype id
+LDAPFieldSkype=معرف سكايبي
-LDAPFieldSkypeExample=Example : skypeName
+LDAPFieldSkypeExample=مثال : اسم إسكايبي
-UserSynchronized=وتزامن المستخدم
+UserSynchronized=تمت مزامنة المستخدم
-GroupSynchronized=مجموعة متزامنة
+GroupSynchronized=تمت مزامنة المجموعة
-MemberSynchronized=عضو متزامنة
+MemberSynchronized=تمت مزامنة العضو
-MemberTypeSynchronized=Member type synchronized
+MemberTypeSynchronized=تمت مزامنة نوع العضو
-ContactSynchronized=وتزامن الاتصال
+ContactSynchronized=تمت مزامنة جهة الاتصال
-ForceSynchronize=واكبت قوة Dolibarr --> LDAP
+ForceSynchronize=إجبار التزامن بين دوليبار و خادم الوصول الخفيف للأدلة
-ErrorFailedToReadLDAP=فشل في قراءة قاعدة البيانات LDAP. LDAP وحدة التحقق من الإعداد ، وإمكانية الوصول إلى قاعدة البيانات.
+ErrorFailedToReadLDAP=فشل في قراءة قاعدة بيانات خادم الوصول الخفيف للأدلة. راجع إعدادات وحدة خادم الوصول الخفيف للأدلة، وإمكانية الوصول إلى قاعدة البيانات.
-PasswordOfUserInLDAP=Password of user in LDAP
+PasswordOfUserInLDAP=كلمة سر المستخدم في  خادم الوصول الخفيف للأدلة

htdocs/langs/ar_SA/link.lang

@@ -8,4 +8,4 @@ LinkRemoved= الرابط%sتم إزالتة
 ErrorFailedToDeleteLink= فشل في إزالة الرابط '<b> %s </b>'
 ErrorFailedToUpdateLink= فشل تحديث الرابط '<b> %s </b>'
 URLToLink=عنوان URL للربط
-OverwriteIfExists=Overwrite file if exists
+OverwriteIfExists=إستبدال محتوى الملف إذا كان موجوداً

htdocs/langs/ar_SA/main.lang

@@ -430,6 +430,7 @@ LT1IN=CGST
 LT2IN=SGST
 LT1GC=Additionnal cents
 VATRate=معدل الضريبة
+RateOfTaxN=Rate of tax %s
 VATCode=كود معدل الضريبة
 VATNPR=معدل ضريبة NPR
 DefaultTaxRate=معدل الضريبة الافتراضي
@@ -729,6 +730,7 @@ MenuMembers=أعضاء
 MenuAgendaGoogle=أجندة غوغل
 MenuTaxesAndSpecialExpenses=الضرائب | مصاريف خاصة
 ThisLimitIsDefinedInSetup=حدود دوليبار (Menu home-setup-security): %s كيلوبايت ، حد PHP: %s كيلوبايت
+ThisLimitIsDefinedInSetupAt=Dolibarr limit (Menu %s): %s Kb, PHP limit (Param %s): %s Kb
 NoFileFound=لم يتم رفع مستند
 CurrentUserLanguage=اللغة الحالية
 CurrentTheme=الواجهة الحالية
@@ -1072,6 +1074,7 @@ ValidFrom=صالح من
 ValidUntil=صالح حتى
 NoRecordedUsers=لايوجد مستخدمين
 ToClose=لغلق
+ToRefuse=To refuse
 ToProcess=لعملية
 ToApprove=للموافقة
 GlobalOpenedElemView=نظرة شاملة
@@ -1126,9 +1129,11 @@ UpdateForAllLines=تحديث لجميع البنود
 OnHold=في الانتظار
 Civility=Civility
 AffectTag=Affect Tag
+CreateExternalUser=Create external user
 ConfirmAffectTag=Bulk Tag Affect
 ConfirmAffectTagQuestion=Are you sure you want to affect tags to the %s selected record(s)?
 CategTypeNotFound=لا يوجد ملصق لنوع السجل
 CopiedToClipboard=تم النسخ الى الحافظة
 InformationOnLinkToContract=هذا المبلغ هو مجموع بنود العقد . دون مراعاة قيمة الزمن
 ConfirmCancel=Are you sure you want to cancel
+EmailMsgID=Email MsgID

htdocs/langs/ar_SA/margins.lang

@@ -16,20 +16,20 @@ MarginDetails=تفاصيل الهامش
 ProductMargins=هوامش المنتج
 CustomerMargins=هوامش العملاء
 SalesRepresentativeMargins=هوامش ممثل المبيعات
-ContactOfInvoice=Contact of invoice
+ContactOfInvoice=جهة إتصال الفاتورة
 UserMargins=هوامش المستخدم
 ProductService=المنتج أو الخدمة
 AllProducts=جميع المنتجات والخدمات
 ChooseProduct/Service=اختيار المنتج أو الخدمة
 ForceBuyingPriceIfNull=فرض سعر  شراء / تكلفة إلى سعر البيع إذا لم يتم تحديدها
-ForceBuyingPriceIfNullDetails=If buying/cost price not provided when we add a new line, and this option is "ON", the margin will be 0 on the new line (buying/cost price = selling price). If this option is "OFF" (recommended), margin will be equal to the value suggested by default (and may be 100% if no default value can be found).
+ForceBuyingPriceIfNullDetails=إذا لم يتم تحديد سعر / تكلفة الشراء عند إضافة بند جديد، وتم "تشغيل" هذا الخيار ، فإن الهامش على البند المضاف سيكون صفراَ (سعر /لتكلفة الشراء  = سعر البيع). إذا تم  "إيقاف" هذا الخيار(مستحسن)، فإن الهامش يساوي القيمة الاولية المقترحة (وربما تكون 100% إذا لم توجد قيمة اولية).
 MARGIN_METHODE_FOR_DISCOUNT=طريقة الهامش للخصومات العالمية
 UseDiscountAsProduct=كمنتج
 UseDiscountAsService=كخدمة
 UseDiscountOnTotal=على المجموع الفرعي
 MARGIN_METHODE_FOR_DISCOUNT_DETAILS=يحدد ما إذا كان يتم التعامل مع الخصم العالمي كمنتج أو خدمة أو فقط على المجموع الفرعي لحساب الهامش.
 MARGIN_TYPE=سعر الشراء / التكلفة المقترحة افتراضيا لحساب الهامش
-MargeType1=Margin on Best vendor price
+MargeType1=الهامش على سعر المورد الافضل
 MargeType2=الهامش على متوسط ​​السعر المرجح (واب)
 MargeType3=هامش على سعر التكلفة
 MarginTypeDesc=* Margin on best buying price = Selling price - Best vendor price defined on product card<br>* Margin on Weighted Average Price (WAP) = Selling price - Product Weighted Average Price (WAP) or best vendor price if WAP not yet defined<br>* Margin on Cost price = Selling price - Cost price defined on product card or WAP if cost price not defined, or best vendor price if WAP not yet defined

htdocs/langs/ar_SA/members.lang

@@ -213,3 +213,5 @@ SendReminderForExpiredSubscription=Send reminder by email to members when subscr
 MembershipPaid=Membership paid for current period (until %s)
 YouMayFindYourInvoiceInThisEmail=You may find your invoice attached to this email
 XMembersClosed=%s member(s) closed
+XExternalUserCreated=%s external user(s) created
+ForceMemberNature=Force member nature (Individual or Corporation)

htdocs/langs/ar_SA/modulebuilder.lang

@@ -143,3 +143,4 @@ AsciiToHtmlConverter=Ascii to HTML converter
 AsciiToPdfConverter=Ascii to PDF converter
 TableNotEmptyDropCanceled=Table not empty. Drop has been canceled.
 ModuleBuilderNotAllowed=The module builder is available but not allowed to your user.
+ImportExportProfiles=Import and export profiles

htdocs/langs/ar_SA/mrp.lang

@@ -1,4 +1,4 @@
-Mrp=Manufacturing Orders
+Mrp=أوامر التصنيع
 MOs=Manufacturing orders
 ManufacturingOrder=Manufacturing Order
 MRPDescription=Module to manage production and Manufacturing Orders (MO).
@@ -8,12 +8,12 @@ MenuBOM=Bills of material
 LatestBOMModified=Latest %s Bills of materials modified
 LatestMOModified=Latest %s Manufacturing Orders modified
 Bom=Bills of Material
-BillOfMaterials=Bill of Material
+BillOfMaterials=Bill of Materials
 BOMsSetup=Setup of module BOM
 ListOfBOMs=List of bills of material - BOM
 ListOfManufacturingOrders=List of Manufacturing Orders
-NewBOM=New bill of material
+NewBOM=New bill of materials
-ProductBOMHelp=Product to create with this BOM.<br>Note: Products with the property 'Nature of product' = 'Raw material' are not visible into this list.
+ProductBOMHelp=Product to create (or disassemble) with this BOM.<br>Note: Products with the property 'Nature of product' = 'Raw material' are not visible into this list.
 BOMsNumberingModules=BOM numbering templates
 BOMsModelModule=BOM document templates
 MOsNumberingModules=MO numbering templates
@@ -22,7 +22,7 @@ FreeLegalTextOnBOMs=Free text on document of BOM
 WatermarkOnDraftBOMs=Watermark on draft BOM
 FreeLegalTextOnMOs=Free text on document of MO
 WatermarkOnDraftMOs=Watermark on draft MO
-ConfirmCloneBillOfMaterials=Are you sure you want to clone the bill of material %s ?
+ConfirmCloneBillOfMaterials=Are you sure you want to clone the bill of materials %s ?
 ConfirmCloneMo=Are you sure you want to clone the Manufacturing Order %s ?
 ManufacturingEfficiency=Manufacturing efficiency
 ConsumptionEfficiency=Consumption efficiency
@@ -30,16 +30,16 @@ ValueOfMeansLoss=Value of 0.95 means an average of 5%% of loss during the produc
 ValueOfMeansLossForProductProduced=Value of 0.95 means an average of 5%% of loss of produced product
 DeleteBillOfMaterials=Delete Bill Of Materials
 DeleteMo=Delete Manufacturing Order
-ConfirmDeleteBillOfMaterials=Are you sure you want to delete this Bill Of Material?
+ConfirmDeleteBillOfMaterials=Are you sure you want to delete this Bill Of Materials?
-ConfirmDeleteMo=Are you sure you want to delete this Bill Of Material?
+ConfirmDeleteMo=Are you sure you want to delete this Bill Of Materials?
-MenuMRP=Manufacturing Orders
+MenuMRP=أوامر التصنيع
 NewMO=New Manufacturing Order
 QtyToProduce=Qty to produce
 DateStartPlannedMo=Date start planned
 DateEndPlannedMo=Date end planned
 KeepEmptyForAsap=Empty means 'As Soon As Possible'
 EstimatedDuration=Estimated duration
-EstimatedDurationDesc=Estimated duration to manufacture this product using this BOM
+EstimatedDurationDesc=Estimated duration to manufacture (or disassemble) this product using this BOM
 ConfirmValidateBom=Are you sure you want to validate the BOM with the reference <strong>%s</strong> (you will be able to use it to build new Manufacturing Orders)
 ConfirmCloseBom=Are you sure you want to cancel this BOM (you won't be able to use it to build new Manufacturing Orders anymore) ?
 ConfirmReopenBom=Are you sure you want to re-open this BOM (you will be able to use it to build new Manufacturing Orders)
@@ -63,13 +63,14 @@ ConsumeAndProduceAll=Consume and Produce All
 Manufactured=Manufactured
 TheProductXIsAlreadyTheProductToProduce=The product to add is already the product to produce.
 ForAQuantityOf=For a quantity to produce of %s
+ForAQuantityToConsumeOf=For a quantity to disassemble of %s
 ConfirmValidateMo=Are you sure you want to validate this Manufacturing Order?
 ConfirmProductionDesc=By clicking on '%s', you will validate the consumption and/or production for the quantities set. This will also update the stock and record stock movements.
 ProductionForRef=Production of %s
 AutoCloseMO=Close automatically the Manufacturing Order if quantities to consume and to produce are reached
 NoStockChangeOnServices=No stock change on services
 ProductQtyToConsumeByMO=Product quantity still to consume by open MO
-ProductQtyToProduceByMO=Product quentity still to produce by open MO
+ProductQtyToProduceByMO=Product quantity still to produce by open MO
 AddNewConsumeLines=Add new line to consume
 ProductsToConsume=Products to consume
 ProductsToProduce=Products to produce
@@ -83,15 +84,13 @@ Workstations=Workstations
 WorkstationsDescription=Workstations management
 WorkstationSetup = Workstations setup
 WorkstationSetupPage = Workstations setup page
-WorkstationAbout = About Workstation
-WorkstationAboutPage = Workstations about page
 WorkstationList=Workstation list
 WorkstationCreate=Add new workstation
 ConfirmEnableWorkstation=Are you sure you want to enable workstation <b>%s</b> ?
 EnableAWorkstation=Enable a workstation
 ConfirmDisableWorkstation=Are you sure you want to disable workstation <b>%s</b> ?
 DisableAWorkstation=Disable a workstation
-DeleteWorkstation=Supprimer
+DeleteWorkstation=حذف
 NbOperatorsRequired=Number of operators required
 THMOperatorEstimated=Estimated operator THM
 THMMachineEstimated=Estimated machine THM

htdocs/langs/ar_SA/orders.lang

@@ -11,13 +11,14 @@ OrderDate=تاريخ الامر
 OrderDateShort=تاريخ الامر
 OrderToProcess=امر للعمل
 NewOrder=امر جديد
+NewSupplierOrderShort=امر جديد
 NewOrderSupplier=أمر شراء جديد
 ToOrder=قم بالامر
 MakeOrder=قم بالامر
 SupplierOrder=أمر شراء
 SuppliersOrders=اوامر الشراء
-SaleOrderLines=Sale order lines
+SaleOrderLines=بنود امر البيع
-PurchaseOrderLines=Puchase order lines
+PurchaseOrderLines=بنود امر الشراء
 SuppliersOrdersRunning=أوامر الشراء الحالية
 CustomerOrder=امر بيع
 CustomersOrders=اوامر البيع
@@ -73,6 +74,7 @@ DeleteOrder=حذف الامر
 CancelOrder=الغاء الامر
 OrderReopened= إعادة فتح الامر %s
 AddOrder=إنشاء امر
+AddSupplierOrderShort=إنشاء امر
 AddPurchaseOrder=إنشاء أمر شراء
 AddToDraftOrders=أضف إلى مسودة امر
 ShowOrder=عرض الامر

htdocs/langs/ar_SA/other.lang

@@ -129,6 +129,7 @@ ClosedByLogin=تسجيل دخول المستخدم الذي أغلق
 FileWasRemoved=تم حذف الملف
 DirWasRemoved=دليل أزيل
 FeatureNotYetAvailable=Feature not yet available in the current version
+FeatureNotAvailableOnDevicesWithoutMouse=Feature not available on devices without mouse
 FeaturesSupported=Supported features
 Width=عرض
 Height=ارتفاع
@@ -263,7 +264,7 @@ ContactCreatedByEmailCollector=Contact/address created by email collector from e
 ProjectCreatedByEmailCollector=Project created by email collector from email MSGID %s
 TicketCreatedByEmailCollector=Ticket created by email collector from email MSGID %s
 OpeningHoursFormatDesc=Use a - to separate opening and closing hours.<br>Use a space to enter different ranges.<br>Example: 8-12 14-18
-PrefixSession=Prefix for session ID
+SuffixSessionName=Suffix for session name
 
 ##### Export #####
 ExportsArea=صادرات المنطقة

htdocs/langs/ar_SA/partnership.lang

@@ -16,41 +16,72 @@
 #
 # Generic
 #
-ModulePartnershipName = إدارة الشراكة
+ModulePartnershipName=إدارة الشراكة
-PartnershipDescription = وحدة إدارة الشراكة
+PartnershipDescription=وحدة إدارة الشراكة
 PartnershipDescriptionLong= وحدة إدارة الشراكة
 
+AddPartnership=Add partnership
+CancelPartnershipForExpiredMembers=Partnership: Cancel partnership of members with expired subscriptions
+PartnershipCheckBacklink=Partnership: Check referring backlink
+
 #
 # Menu
 #
-NewPartnership = شراكة جديدة
+NewPartnership=شراكة جديدة
-ListOfPartnerships = قائمة الشراكات
+ListOfPartnerships=قائمة الشراكات
 
 #
 # Admin page
 #
-PartnershipSetup = إعدادات الشراكة
+PartnershipSetup=إعدادات الشراكة
-PartnershipAbout = حول الشراكة
+PartnershipAbout=حول الشراكة
-PartnershipAboutPage = صفحة حول الشراكة 
+PartnershipAboutPage=صفحة حول الشراكة 
-
+partnershipforthirdpartyormember=Partner status must be set on a 'thirdparty' or a 'member'
+PARTNERSHIP_IS_MANAGED_FOR=Partnership managed for
+PARTNERSHIP_BACKLINKS_TO_CHECK=Backlinks to check
+PARTNERSHIP_NBDAYS_AFTER_MEMBER_EXPIRATION_BEFORE_CANCEL=Nb of days before cancelling status of a partnership when a subscription has expired
+ReferingWebsiteCheck=Check of website referring
+ReferingWebsiteCheckDesc=You can enable a feature to check that your partners has added a backlink to your website domains on their own website.
 
 #
 # Object
 #
+DeletePartnership=Delete a partnership
+PartnershipDedicatedToThisThirdParty=Partnership dedicated to this third party
+PartnershipDedicatedToThisMember=Partnership dedicated to this member
 DatePartnershipStart=تاريخ البدء
 DatePartnershipEnd=تاريخ الانتهاء
+ReasonDecline=Decline reason
+ReasonDeclineOrCancel=Decline reason
+PartnershipAlreadyExist=Partnership already exist
+ManagePartnership=Manage partnership
+BacklinkNotFoundOnPartnerWebsite=Backlink not found on partner website
+ConfirmClosePartnershipAsk=Are you sure you want to cancel this partnership?
+PartnershipType=Partnership type
 
 #
 # Template Mail
 #
+SendingEmailOnPartnershipWillSoonBeCanceled=Partnership will soon be canceled
+SendingEmailOnPartnershipRefused=Partnership refused
+SendingEmailOnPartnershipAccepted=Partnership accepted
+SendingEmailOnPartnershipCanceled=Partnership canceled
 
+YourPartnershipWillSoonBeCanceledTopic=Partnership will soon be canceled
+YourPartnershipRefusedTopic=Partnership refused
+YourPartnershipAcceptedTopic=Partnership accepted
+YourPartnershipCanceledTopic=Partnership canceled
+
+YourPartnershipWillSoonBeCanceledContent=We inform you that your partnership will soon be canceled (Backlink not found)
+YourPartnershipRefusedContent=We inform you that your partnership request has been refused.
+YourPartnershipAcceptedContent=We inform you that your partnership request has been accepted.
+YourPartnershipCanceledContent=We inform you that your partnership has been canceled.
 
 #
 # Status
 #
-PartnershipDraft = حوالة مصرفية
+PartnershipDraft=حوالة مصرفية
-PartnershipAccepted = قبلت
+PartnershipAccepted=قبلت
-PartnershipRefused = رفض
+PartnershipRefused=رفض
-PartnershipCanceled = ملغي
+PartnershipCanceled=ملغي
-
 PartnershipManagedFor=الشركاء هم

htdocs/langs/ar_SA/productbatch.lang

@@ -1,4 +1,4 @@
-# ProductBATCH language file - en_US - ProductBATCH
+# ProductBATCH language file - Source file is en_US - ProductBATCH
 ManageLotSerial=استخدام الكثير / الرقم التسلسلي
 ProductStatusOnBatch=Yes (lot required)
 ProductStatusOnSerial=Yes (unique serial number required)
@@ -33,3 +33,13 @@ CustomMasks=Adds an option to define mask in the product card
 LotProductTooltip=Adds an option in the product card to define a dedicated batch number mask
 SNProductTooltip=Adds an option in the product card to define a dedicated serial number mask
 QtyToAddAfterBarcodeScan=Qty to add for each barcode/lot/serial scanned
+LifeTime=Life span (in days)
+EndOfLife=End of life
+ManufacturingDate=Manufacturing date
+DestructionDate=Destruction date
+FirstUseDate=First use date
+QCFrequency=Quality control frequency (in days)
+
+#Traceability - qc status
+OutOfOrder=Out of order
+InWorkingOrder=In working order

htdocs/langs/ar_SA/products.lang

@@ -396,3 +396,5 @@ ActionAvailableOnVariantProductOnly=Action only available on the variant of prod
 ProductsPricePerCustomer=Product prices per customers
 ProductSupplierExtraFields=Additional Attributes (Supplier Prices)
 DeleteLinkedProduct=Delete the child product linked to the combination
+PMPValue=المتوسط المرجح لسعر
+PMPValueShort=الواب

htdocs/langs/ar_SA/projects.lang

@@ -267,9 +267,11 @@ InvoiceToUse=Draft invoice to use
 NewInvoice=فاتورة جديدة
 OneLinePerTask=One line per task
 OneLinePerPeriod=One line per period
+OneLinePerTimeSpentLine=One line for each time spent declaration
 RefTaskParent=Ref. Parent Task
 ProfitIsCalculatedWith=Profit is calculated using
 AddPersonToTask=Add also to tasks
 UsageOrganizeEvent=Usage: Event Organization
 PROJECT_CLASSIFY_CLOSED_WHEN_ALL_TASKS_DONE=Classify project as closed when all its tasks are completed (100%% progress)
 PROJECT_CLASSIFY_CLOSED_WHEN_ALL_TASKS_DONE_help=Note: existing projects with all tasks at 100 %% progress won't be affected: you will have to close them manually. This option only affects open projects.
+SelectLinesOfTimeSpentToInvoice=Select lines of time spent that are unbilled, then bulk action "Generate Invoice" to bill them

htdocs/langs/ar_SA/receptions.lang

@@ -44,4 +44,4 @@ ValidateOrderFirstBeforeReception=You must first validate the order before being
 ReceptionsNumberingModules=Numbering module for receptions
 ReceptionsReceiptModel=Document templates for receptions
 NoMorePredefinedProductToDispatch=No more predefined products to dispatch
-
+ReceptionExist=A reception exists

htdocs/langs/ar_SA/stocks.lang

@@ -56,8 +56,6 @@ UnitPurchaseValue=وحدة سعر الشراء
 StockTooLow=الاسهم منخفضة جدا
 StockLowerThanLimit=Stock lower than alert limit (%s)
 EnhancedValue=القيمة
-PMPValue=المتوسط المرجح لسعر
-PMPValueShort=الواب
 EnhancedValueOfWarehouses=قيمة المستودعات
 UserWarehouseAutoCreate=Create a user warehouse automatically when creating a user
 AllowAddLimitStockByWarehouse=Manage also value for minimum and desired stock per pairing (product-warehouse) in addition to the value for minimum and desired stock per product
@@ -251,7 +249,10 @@ SelectAStockMovementFileToImport=select a stock movement file to import
 InfoTemplateImport=Uploaded file needs to have this format (* are mandatory fields):<br>Source Warehouse* | Target Warehouse* | Product* | Quantity* | Lot/serial number<br>CSV character separator must be "<b>%s</b>"
 LabelOfInventoryMovemement=Inventory %s
 ReOpen=إعادة فتح
-ConfirmFinish=Do you confirm the closing of the inventory ? This will generate all stock movements to update your stock.
+ConfirmFinish=Do you confirm the closing of the inventory ? This will generate all stock movements to update your stock to the real qty you entered into the inventory.
 ObjectNotFound=%s not found
 MakeMovementsAndClose=Generate movements and close
 AutofillWithExpected=Fill real quantity with expected quantity
+ShowAllBatchByDefault=By default, show batch details on product "stock" tab
+CollapseBatchDetailHelp=You can set batch detail default display in stocks module configuration
+FieldCannotBeNegative=Field "%s" cannot be negative

htdocs/langs/ar_SA/ticket.lang

@@ -304,7 +304,7 @@ BoxLastModifiedTicket=Latest modified tickets
 BoxLastModifiedTicketDescription=Latest %s modified tickets
 BoxLastModifiedTicketContent=
 BoxLastModifiedTicketNoRecordedTickets=No recent modified tickets
-BoxTicketType=Number of open tickets by type
+BoxTicketType=Distribution of open tickets by type
 BoxTicketSeverity=Number of open tickets by severity
 BoxNoTicketSeverity=No tickets opened
 BoxTicketLastXDays=Number of new tickets by days the last %s days

htdocs/langs/ar_SA/website.lang

@@ -1,147 +1,147 @@
 # Dolibarr language file - Source file is en_US - website
-Shortname=رمز
+Shortname=نص مرمز
-WebsiteSetupDesc=Create here the websites you wish to use. Then go into menu Websites to edit them.
+WebsiteSetupDesc=قم بإنشاء الموقع الالكتروني الذي ترغب باستخدامه ثم اذهب الى القائمة المواقع الإلكترونية لتعديلها
-DeleteWebsite=Delete website
+DeleteWebsite=حذف الموقع الإلكتروني
-ConfirmDeleteWebsite=Are you sure you want to delete this web site? All its pages and content will also be removed. The files uploaded (like into the medias directory, the ECM module, ...) will remain.
+ConfirmDeleteWebsite=هل انت متأكد من رغبتك بحذف هذا الموقع الإلكتروني ؟ سيتم حذف جميع الصفحات والمحتويات ايضا. الملفات المحملة (كما في المسار الاستديو و وحدة وإدارة المحتوى الرقمي) ستبقى دون حذف.
-WEBSITE_TYPE_CONTAINER=Type of page/container
+WEBSITE_TYPE_CONTAINER=نوع الصفحة \\ الحاوية
-WEBSITE_PAGE_EXAMPLE=Web page to use as example
+WEBSITE_PAGE_EXAMPLE=الصفحة التي تريد إستخدامها كمثال
-WEBSITE_PAGENAME=Page name/alias
+WEBSITE_PAGENAME=اسم\\لقب الصفحة
-WEBSITE_ALIASALT=Alternative page names/aliases
+WEBSITE_ALIASALT=اسم\\لقب بديل للصفحة
-WEBSITE_ALIASALTDesc=Use here list of other name/aliases so the page can also be accessed using this other names/aliases (for example the old name after renaming the alias to keep backlink on old link/name working). Syntax is:<br>alternativename1, alternativename2, ...
+WEBSITE_ALIASALTDesc=إستخدم هنا قائمة من اسماء\\القاب الصفحة حتى يتم الوصول للصفحة باكثر من اسم\\لقب (على سبيل المثال اسم الصفحة القديم بعد إعادة تسميتها للمحافظة على عمل الروابط القديمة) . الطريقة هي <br> الاسم ابديل1 ، الاسم البديل2، ...
-WEBSITE_CSS_URL=URL of external CSS file
+WEBSITE_CSS_URL=رابط خارجي لملف المظهر
-WEBSITE_CSS_INLINE=CSS file content (common to all pages)
+WEBSITE_CSS_INLINE=محتوى ملف مظهر (مشترك بين كل الصفحات)
-WEBSITE_JS_INLINE=Javascript file content (common to all pages)
+WEBSITE_JS_INLINE=محتوى ملف جافاسكربت (مشترك بين كل الصفحات)
-WEBSITE_HTML_HEADER=Addition at bottom of HTML Header (common to all pages)
+WEBSITE_HTML_HEADER=ترويسات لغة ترميز النصوص التشعبية (مشتركة بين كل الصفحات)
-WEBSITE_ROBOT=Robot file (robots.txt)
+WEBSITE_ROBOT=محتوى ملف الروبوتات النصي 
-WEBSITE_HTACCESS=Website .htaccess file
+WEBSITE_HTACCESS=محتوى ملف ضبط الوصول
-WEBSITE_MANIFEST_JSON=Website manifest.json file
+WEBSITE_MANIFEST_JSON=ملف قوائم جسون للموقع
-WEBSITE_README=README.md file
+WEBSITE_README=ملف إقرأني الوصفي
-WEBSITE_KEYWORDSDesc=Use a comma to separate values
+WEBSITE_KEYWORDSDesc=إستخدم الشولة لفصل القيم 
-EnterHereLicenseInformation=Enter here meta data or license information to fille a README.md file. if you distribute your website as a template, the file will be included into the temptate package.
+EnterHereLicenseInformation=أدخل هنا المعلومات الوصفية او معلومات الترخيص لملئ محتوى ملف إقرأني الوصفي . إذا قمت بتوزيع موقعك كقالب ، سيتم تصمين الملف في الحزمة.
-HtmlHeaderPage=HTML header (specific to this page only)
+HtmlHeaderPage=ترويسات لغة ترميز النصوص التشعبية (لهذه الصفحة فقظ)
-PageNameAliasHelp=Name or alias of the page.<br>This alias is also used to forge a SEO URL when website is ran from a Virtual host of a Web server (like Apacke, Nginx, ...). Use the button "<strong>%s</strong>" to edit this alias.
+PageNameAliasHelp=اسم او لقب الصفحة. <br> هذا يستخدم ايضا لانشاء رابط تسريع محركات البحث عندما يتم تشغيل الموقع عبر خادم إستضافة افتراضي (مثل اباتشي او انجنكس..) إستخدم الزر "<strong>%s</strong>" لتعديل هذا الاسم او اللقب.
-EditTheWebSiteForACommonHeader=Note: If you want to define a personalized header for all pages, edit the header on the site level instead of on the page/container.
+EditTheWebSiteForACommonHeader=ملاحظة: اذا كنت ترغب في تعيين ترويسة لكل الصفحات إستخدم الترويسات على مستوى الموقع بدلا عن ترويسات الصفحة\\الحاوية
-MediaFiles=Media library
+MediaFiles=الاستديو
-EditCss=Edit website properties
+EditCss=تعديل خصائص الموقع الإلكتروني
-EditMenu=Edit menu
+EditMenu=تعديل القائمة
-EditMedias=Edit medias
+EditMedias=تعديل الاستديو
-EditPageMeta=Edit page/container properties
+EditPageMeta=تعديل خصائص الصفحة\\الحاوية
-EditInLine=Edit inline
+EditInLine=تعديل على السطور
-AddWebsite=Add website
+AddWebsite=إضافة موقع إلكتروني
-Webpage=Web page/container
+Webpage=الصفحة\\الحاوية
-AddPage=Add page/container
+AddPage=إضافة صفحة\\حاوية
 PageContainer=صفحة
-PreviewOfSiteNotYetAvailable=Preview of your website <strong>%s</strong> not yet available. You must first '<strong>Import a full website template</strong>' or just '<strong>Add a page/container</strong>'.
+PreviewOfSiteNotYetAvailable=إستعراض موقعك الإلكتروني <strong>%s</strong> غير متاح الان . عليك اولاً  "<strong>إستيراد قالب موقع إلكتروني </strong>"  او فقط  "<strong>إضافة صفحة\\حاوية</strong>".
-RequestedPageHasNoContentYet=Requested page with id %s has no content yet, or cache file .tpl.php was removed. Edit content of the page to solve this.
+RequestedPageHasNoContentYet=الصفحة المطلوبة بالمعرف  %s لاتحتوي بعد على محتوى ، او ان ملف القالب الخاص بها قد تم حذفه. قم بتعديل محتويات الصفحة لحل ذلك
-SiteDeleted=Web site '%s' deleted
+SiteDeleted= الموقع "%s" تم حذهف
-PageContent=Page/Contenair
+PageContent=الصفحة\\الحاوية
-PageDeleted=Page/Contenair '%s' of website %s deleted
+PageDeleted=الصفحة\\الحاوية  "%s" من الموقع الإلكتروني %s تم حذفها
-PageAdded=Page/Contenair '%s' added
+PageAdded=الصفحة\\الحاوية "%s" تم إضافتها
-ViewSiteInNewTab=View site in new tab
+ViewSiteInNewTab=عرض الموقع في علامة تبويب جديدة
-ViewPageInNewTab=View page in new tab
+ViewPageInNewTab=عرض الصفحة في علامة تبويب جديدة
-SetAsHomePage=Set as Home page
+SetAsHomePage=إجعلها الصفحة الرئيسية
-RealURL=Real URL
+RealURL=الرابط الحقيقة
-ViewWebsiteInProduction=View web site using home URLs
+ViewWebsiteInProduction=عرض الموقع باستخدام رابط الصفحة الرئيسية
-SetHereVirtualHost=<u>Use with Apache/NGinx/...</u><br>Create on your web server (Apache, Nginx, ...) a dedicated Virtual Host with PHP enabled and a Root directory on<br><strong>%s</strong>
+SetHereVirtualHost=<u>بإستخدام اباتشي \\انجنكس\\...</u><br> على خادمك (اباتشي او انجنكس..) قم بإنشاء خادم افتراضي يدعم البي اتش بي واجعل المسار الجذر له<br><strong>%s</strong>
-ExampleToUseInApacheVirtualHostConfig=Example to use in Apache virtual host setup:
+ExampleToUseInApacheVirtualHostConfig=مثال إعدادات لاستخدامه مع خادم اباتشي افتراضي
-YouCanAlsoTestWithPHPS=<u>Use with PHP embedded server</u><br>On develop environment, you may prefer to test the site with the PHP embedded web server (PHP 5.5 required) by running<br><strong>php -S 0.0.0.0:8080 -t %s</strong>
+YouCanAlsoTestWithPHPS=<u>لاستخدام خادم بي اتش بي المضمن </u><br>على بيئة التطوير ربما تفضل تجربة موقعك بخادم بي اتش بي المضمن (النسخة 5.5 فما فوق) عبر تشغيل <br><strong> php -S 0.0.0.0:8080 -t %s</strong> 
-YouCanAlsoDeployToAnotherWHP=<u>Run your web site with another Dolibarr Hosting provider</u><br>If you don't have a web server like Apache or NGinx available on internet, you can export and import your web site onto another Dolibarr instance provided by another Dolibarr hosting provider that provide full integration with the Website module. You can find a list of some Dolibarr hosting providers on <a href="https://saas.dolibarr.org" target="_blank">https://saas.dolibarr.org</a>
+YouCanAlsoDeployToAnotherWHP=<u>انشر موقعك الإلكتروني مع مقدم إستضافة اخر</u><br>إذا كنت لا تمتلك خادم مواقع مثل اباتشي او انجنكس على الأنترنت، يمكنك تصدير وإستيراد الى نظام دوليبار اخر المقدم بواسطة مقدم استضافة دوليبار والذي يوفر تكامل مكتمل مع وحدة الموقع الإلكتروني. يمكنك ايجاد قائمة من مقدمين إستضافة دوليبار على <a href="https://saas.dolibarr.org" target="_blank">موقع إستضافات دوليبار</a>
-CheckVirtualHostPerms=Check also that the virtual host user (for example www-data) has <strong>%s</strong> permissions on files into<br><strong>%s</strong>
+CheckVirtualHostPerms=ايضاً تأكد من ان مستخدم الخادم (مثلا www-data ) لديه صلاحيات <strong>%s</strong> على الملفات <br><strong>%s</strong>
 ReadPerm=قرأ
-WritePerm=Write
+WritePerm=التعديل والكتابة
-TestDeployOnWeb=Test/deploy on web
+TestDeployOnWeb=تجربة \\نشر على الانترنت
-PreviewSiteServedByWebServer=<u>Preview %s in a new tab.</u><br><br>The %s will be served by an external web server (like Apache, Nginx, IIS). You must install and setup this server before to point to directory:<br><strong>%s</strong><br>URL served by external server:<br><strong>%s</strong>
+PreviewSiteServedByWebServer=<u>إستعراض %s في علامة تبويب جديدة.</u><br><br> الرابط %s سيتم إنشائه بواسطة خادم خارجي (اباتشي او انجنكس مثلاً). لابد ان تثبت هذا الخادم بنفسك وتقوم بإعداده ليشير الى المسار : <br><strong>%s</strong><br>الرابط المخدوم بواسطة خادم خارجي هو : <br><strong>%s</strong>
-PreviewSiteServedByDolibarr=<u>Preview %s in a new tab.</u><br><br>The %s will be served by Dolibarr server so it does not need any extra web server (like Apache, Nginx, IIS) to be installed.<br>The inconvenient is that the URLs of pages are not user friendly and start with the path of your Dolibarr.<br>URL served by Dolibarr:<br><strong>%s</strong><br><br>To use your own external web server to serve this web site, create a virtual host on your web server that points on directory<br><strong>%s</strong><br>then enter the name of this virtual server in the properties of this website and click on the link "Test/Deploy on the web".
+PreviewSiteServedByDolibarr=<u>إستعراض %s في علامة تبويب جديدة.</u><br><br> الرابط %s سيتم إنشائه بواسطة خادم نظام دوليبار وبذالك لا يحتاج لتثبيت خادم خارجي (مثل اباتشي او انجنكس) .<br>المزعج في الامر ان روابط الصفحات صعبة للمستخدمين وستحتوي على مسار نظام دوليبار.<br> الرابط المخدوم بواسطة دوليبار :<br><strong>%s</strong><br><br>لإستخدام خادمك الخاص لتقديم موقعك الإلكتروني قم بأنشاء خادم إفتراضي (كما في اباتشي) واجعله يشير الى المسار<br><strong>%s</strong><br>ثم قم باضافة الرابط في إعدادات الموقع الإلكتروني ثم قم بالضغط على "تجربة\\نشر موقعك الإلكتروني"
-VirtualHostUrlNotDefined=URL of the virtual host served by external web server not defined
+VirtualHostUrlNotDefined=رابط الخادم الافتراضي المخدوم بواسطة خادم خارجي غير معرف
-NoPageYet=No pages yet
+NoPageYet=لا يوجد صفحات بعد
-YouCanCreatePageOrImportTemplate=You can create a new page or import a full website template
+YouCanCreatePageOrImportTemplate=يمكنك انشاء صفحة جديدة او إستيراد موقع إلكتروني كامل
-SyntaxHelp=Help on specific syntax tips
+SyntaxHelp=مساعدة ونصائح في تكريب جمل معينة
-YouCanEditHtmlSourceckeditor=You can edit HTML source code using the "Source" button in editor.
+YouCanEditHtmlSourceckeditor=يمكن تحرير مصدر  لغة ترميز النصوص التشعبية باستخدام زر "تحرير المصدر" في المحرر
-YouCanEditHtmlSource=<br><span class="fa fa-bug"></span> You can include PHP code into this source using tags <strong>&lt;?php ?&gt;</strong>. The following global variables are available: $conf, $db, $mysoc, $user, $website, $websitepage, $weblangs, $pagelangs.<br><br><span class="fa fa-bug"></span> You can also include content of another Page/Container with the following syntax:<br><strong>&lt;?php includeContainer('alias_of_container_to_include'); ?&gt;</strong><br><br><span class="fa fa-bug"></span> You can make a redirect to another Page/Container with the following syntax (Note: do not output any content before a redirect):<br><strong>&lt;?php redirectToContainer('alias_of_container_to_redirect_to'); ?&gt;</strong><br><br><span class="fa fa-link"></span> To add a link to another page, use the syntax:<br><strong>&lt;a href="alias_of_page_to_link_to.php"&gt;mylink&lt;a&gt;</strong><br><br><span class="fa fa-download"></span> To include a <strong>link to download</strong> a file stored into the <strong>documents</strong> directory, use the <strong>document.php</strong> wrapper:<br>Example, for a file into documents/ecm (need to be logged), syntax is:<br><strong>&lt;a href="/document.php?modulepart=ecm&file=[relative_dir/]filename.ext"&gt;</strong><br>For a file into documents/medias (open directory for public access), syntax is:<br><strong>&lt;a href="/document.php?modulepart=medias&file=[relative_dir/]filename.ext"&gt;</strong><br>For a file shared with a share link (open access using the sharing hash key of file), syntax is:<br><strong>&lt;a href="/document.php?hashp=publicsharekeyoffile"&gt;</strong><br><br><span class="fa fa-picture-o"></span> To include an <strong>image</strong> stored into the <strong>documents</strong> directory, use the <strong>viewimage.php</strong> wrapper:<br>Example, for an image into documents/medias (open directory for public access), syntax is:<br><strong>&lt;img src="/viewimage.php?modulepart=medias&amp;file=[relative_dir/]filename.ext"&gt;</strong><br>
+YouCanEditHtmlSource=<br><span class="fa fa-bug"></span>يمكنك تضمين نصوص بي اتش بي بإستخدام أوسمة <strong>&gt;?php?&lt;</strong>.  و المتغيرات العامة التالية متاحة : $conf, $db, $mysoc, $user, $website, $websitepage, $weblangs, $pagelangs.<br><br><span class="fa fa-bug"></span> يمكنك ايضا تضمين محتوى صفحة \\حاوية اخرى عن طريق تركيب الجملة التالي <br><strong>&lt;?php includeContainer('لقب_الصفحة_المطلوبة'); ?&gt; </strong><br><br><span class="fa fa-bug"></span>يمكنك إعادة التوجيه الى صفحة \\حاوية اخرى عن طريق تركيب الجملة التالي (ملاحظة لاتقم باي طباعة لمخرجات قبل عملية إعادة التوجهي ) : <br><strong>&lt;?php redirectToContainer('لقب_الصفحة_المطلوبة'); ?&gt;</strong><br><br><span class="fa fa-link"></span> لإضافة رابط رابط صفحة اخرى يمكنك إستخدام تركيب الجملة التالي :<br><strong> &lt;a href="لقب_الصفحة_المطلوبة.php"&gt;mylink&lt;a&gt;</strong><br><br><span class="fa fa-download"></span> لتضمين <strong>رابط لتحميل </strong> ملف موجود ضمن مسار <strong> المستندات </strong> إستخدم المغلف <strong>document.php</strong>:<br> على سبيل المثال لمف موجود على المسار /documents/ecm (يجب تسجيل الدخول اولاً) إستخدم تركيب الجملة التالي :<br><strong>&lt;a href="/document.php?modulepart=ecm&file=[relative_dir/]filename.ext"&gt;</strong><br> ولملف في المسار documents/medias (مسار مفتوح الوصول للجميع) إستخدم تركيب الجملة التالي: <br><strong> &lt;a href="/document.php?modulepart=medias&file=[relative_dir/]filename.ext"&gt;</strong><br> للمفات المشاركة بواسطة رابط المشاركة (وصول مفتوح بإستخدام مفتاح رمز دالة الملف ) إستخدم تركيب الجملة التالي:<br><strong> &lt;a href="/document.php?hashp=publicsharekeyoffile"&gt;</strong><br><br><span class="fa fa-picture-o"></span> لتضمين <strong>صورة </strong> مخزنة في مسار <strong>المستندات</strong> إستخدم المغلف <strong> viewimage.php</strong>: <br> على سبيل المثال لتضمين صورة موجودة في المسار documents/medias (مسار مفتوح الوصول للعامة)، إستخدم تركيب الجملة التالي:<br><strong> &lt;img src="/viewimage.php?modulepart=medias&amp;file=[relative_dir/]filename.ext"&gt;</strong><br>
 #YouCanEditHtmlSource2=<br><span class="fa fa-picture-o"></span> To include a <strong>image</strong> shared publicaly, use the <strong>viewimage.php</strong> wrapper:<br>Example with a shared key 123456789, syntax is:<br><strong>&lt;img src="/viewimage.php?hashp=12345679012..."&gt;</strong><br>
-YouCanEditHtmlSource2=For an image shared with a share link (open access using the sharing hash key of file), syntax is:<br><strong>&lt;img src="/viewimage.php?hashp=12345679012..."&gt;</strong><br>
+YouCanEditHtmlSource2=لتضمين صورة مشاركة عن طريق رابط المشاركة (وصول عام باستخدام رمز دالة الملف) إستخدم تركيب الجملة التالي:<br><strong> &lt;img src="/viewimage.php?hashp=12345679012..."&gt;</strong><br>
-YouCanEditHtmlSourceMore=<br>More examples of HTML or dynamic code available on <a href="%s" target="_blank">the wiki documentation</a><br>.
+YouCanEditHtmlSourceMore=<br>امثلة اكثر  للغة ترميز النصوص التشعبية متاحة على <a href="%s" target="_blank">مدونة التوثيق</a><br>
-ClonePage=Clone page/container
+ClonePage=نسخ الصفحة\\الحاوية
-CloneSite=Clone site
+CloneSite=نسخ الموقع
-SiteAdded=Website added
+SiteAdded=تم إضافة الموقع الإلكتروني
-ConfirmClonePage=Please enter code/alias of new page and if it is a translation of the cloned page.
+ConfirmClonePage=الرجاء ادخال الرمز\\اللقب للصفحة الجديدة او اذا كانت هذه الصفحة هي ترجمة للصفحة المنسوخة
-PageIsANewTranslation=The new page is a translation of the current page ?
+PageIsANewTranslation=هل الصفحة الجديدة هي ترجمة للصفحة الحالية ؟
-LanguageMustNotBeSameThanClonedPage=You clone a page as a translation. The language of the new page must be different than language of source page.
+LanguageMustNotBeSameThanClonedPage=لقد نسخت الصفحة كترجمة . لغة الصفحة الجديدة لابد ان تكون مختلفة عن الصفحة المصدر.
-ParentPageId=Parent page ID
+ParentPageId=معرف الصفحة الام
-WebsiteId=Website ID
+WebsiteId=معرف الموقع الإلكتروني
-CreateByFetchingExternalPage=Create page/container by fetching page from external URL...
+CreateByFetchingExternalPage=إنشاء صفحة\\حاوية عن طريق جلبها من رابط خارجي
-OrEnterPageInfoManually=Or create page from scratch or from a page template...
+OrEnterPageInfoManually=او انشئ صفحة من البداية او من قالب صفحة..
-FetchAndCreate=Fetch and Create
+FetchAndCreate=جلب و إنشاء
-ExportSite=Export website
+ExportSite=تصدير الموقع الالكتروني
-ImportSite=Import website template
+ImportSite=إستيراد قالب موقع إلكتروني
-IDOfPage=Id of page
+IDOfPage=معرف الصفحة
-Banner=Banner
+Banner=لافتة
-BlogPost=Blog post
+BlogPost=تدوينة
-WebsiteAccount=Website account
+WebsiteAccount=حساب موقع إلكتروني
 WebsiteAccounts=حسابات الموقع
-AddWebsiteAccount=Create web site account
+AddWebsiteAccount=إنشاء حساب موقع إلكتروني
-BackToListForThirdParty=Back to list for the third-party
+BackToListForThirdParty=عودة الى قائمة الاطراف الثالثة
-DisableSiteFirst=Disable website first
+DisableSiteFirst=عطل الموقع الإلكتروني اولاً
-MyContainerTitle=My web site title
+MyContainerTitle=عنوان موقعي
-AnotherContainer=This is how to include content of another page/container (you may have an error here if you enable dynamic code because the embedded subcontainer may not exists)
+AnotherContainer=هذه هي الطريقة لتضمين محتوى صفحة\\حاوية اخرى (ربما يظهر لك خطأ عند تمكين المحتوى المتحرك وذلك لان الحاوية الجزئية المضمنة غير موجودة!)
-SorryWebsiteIsCurrentlyOffLine=Sorry, this website is currently off line. Please comme back later...
+SorryWebsiteIsCurrentlyOffLine=للأسف، هذا الموقع غير متصل حاليا. يرجى العودة في وقت لاحق...
-WEBSITE_USE_WEBSITE_ACCOUNTS=Enable the web site account table
+WEBSITE_USE_WEBSITE_ACCOUNTS=تمكين جدول الموقع الالكتروني
-WEBSITE_USE_WEBSITE_ACCOUNTSTooltip=Enable the table to store web site accounts (login/pass) for each website / third party
+WEBSITE_USE_WEBSITE_ACCOUNTSTooltip=تمكين جدول لتخزين حسابات الموقع الإلكتروني (إسم المستخدم\\كلمة السر) لكل موقع إلكتروني \\ طرف ثالث
-YouMustDefineTheHomePage=You must first define the default Home page
+YouMustDefineTheHomePage=لابد ان تُعرف الصفحة الرئيسية المبدئية اولاً
-OnlyEditionOfSourceForGrabbedContentFuture=Warning: Creating a web page by importing an external web page is reserved for experienced users. Depending on the complexity of source page, the result of importation may differ from the original. Also if the source page uses common CSS styles or conflicting javascript, it may break the look or features of the Website editor when working on this page. This method is a quicker way to create a page but it is recommended to create your new page from scratch or from a suggested page template.<br>Note also that the inline editor may not works correclty when used on a grabbed external page.
+OnlyEditionOfSourceForGrabbedContentFuture=تحذير: إنشاء صفحة عن طريق جلبها من صفحة خارجية هي خاصية للمستخديمن المتمرسين. إعتماداً على تعقيد مصدر الصفحة ، نتيجة الجلب قد تختلف من الاصل. ايضا قد تستخدم الصفحة الاصل ملفات مظهر متعارضة او جافاسكربت تؤدي الى تعطل مظهر الصفحة او تعطل خصائص محرر صفحات الموقع الإلكتروني عند العمل على الصفحة. هذه الخاصية اسرع عند إنشاء الصفحات لكن من المستحسن إنشاء صفحة جديدة من البداية او من قالب صفحة .<br> لاحظ ايضا ان التحرير على السطر قد لا يعمل بصورة صحيحة عند العمل على الصفحة المجلوبة.
-OnlyEditionOfSourceForGrabbedContent=Only edition of HTML source is possible when content was grabbed from an external site
+OnlyEditionOfSourceForGrabbedContent=يتاح فقط مصدر لغة ترميز النصوص التشعبية عند الأستجلاب من موقع خارجي
-GrabImagesInto=Grab also images found into css and page.
+GrabImagesInto=جلب الصور الموجودة في الصفحة او في ملف المظهر ايضاً.
-ImagesShouldBeSavedInto=Images should be saved into directory
+ImagesShouldBeSavedInto=يجب ان تُحفظ الصور في مسار
-WebsiteRootOfImages=Root directory for website images
+WebsiteRootOfImages=المسار الجذر لصور الموقع الإلكتروني
-SubdirOfPage=Sub-directory dedicated to page
+SubdirOfPage=مسار فرعي مخصص للصفحة
-AliasPageAlreadyExists=Alias page <strong>%s</strong> already exists
+AliasPageAlreadyExists=لقب الصفحة <strong>%s</strong> موجود مسبقاً
-CorporateHomePage=Corporate Home page
+CorporateHomePage=الصفحة الرئيسية للمؤسسة
-EmptyPage=Empty page
+EmptyPage=صفحة فارغة
-ExternalURLMustStartWithHttp=External URL must start with http:// or https://
+ExternalURLMustStartWithHttp=العنوان الخارجي لابد ان يبدأ ب http:// او https://
-ZipOfWebsitePackageToImport=Upload the Zip file of the website template package
+ZipOfWebsitePackageToImport=قم برفع الملف المضغوط لقالب الموقع الإلكتروني
-ZipOfWebsitePackageToLoad=or Choose an available embedded website template package
+ZipOfWebsitePackageToLoad=او إختر قالب موقع إلكتروني متاحا من القوالب المضمنة
-ShowSubcontainers=Show dynamic content
+ShowSubcontainers=إظهار المحتوى المتحرك
-InternalURLOfPage=Internal URL of page
+InternalURLOfPage=العنوان الداخلي للصفحة
-ThisPageIsTranslationOf=This page/container is a translation of
+ThisPageIsTranslationOf=الصفخة\\الحاوية هي ترجمة لـ
-ThisPageHasTranslationPages=This page/container has translation
+ThisPageHasTranslationPages=هذه الصفحة \\الحاوية لديها ترجمة
-NoWebSiteCreateOneFirst=No website has been created yet. Create one first.
+NoWebSiteCreateOneFirst=لم يتم إنشاء موقع إلكتروني . قم بإنشاء واحد اولاً
-GoTo=Go to
+GoTo=ذهاب الى
-DynamicPHPCodeContainsAForbiddenInstruction=You add dynamic PHP code that contains the PHP instruction '<strong>%s</strong>' that is forbidden by default as dynamic content (see hidden options WEBSITE_PHP_ALLOW_xxx to increase list of allowed commands).
+DynamicPHPCodeContainsAForbiddenInstruction=لقد اضفت ترميز نص بي اتش بي والذي يحتوي على التعليمة "<strong>%s</strong>" وهو ممنوع إبتداءاً في المحتوى المتحرك (راجع الخيار المخفي WEBSITE_PHP_ALLOW_xxx لزيادة قائمة التلعيمات المسموح بها).
-NotAllowedToAddDynamicContent=You don't have permission to add or edit PHP dynamic content in websites. Ask permission or just keep code into php tags unmodified.
+NotAllowedToAddDynamicContent=ليس لديك إذن لإضافة او تعديل محتوى بي اتش بي متحرك في المواقع الإلكترونية. اطلب اذناً او حافظ على الترميز داخل رموز بي اتش بي بدون تعديل
-ReplaceWebsiteContent=Search or Replace website content
+ReplaceWebsiteContent=بحث او إستبدال محتوى الموقع
-DeleteAlsoJs=Delete also all javascript files specific to this website?
+DeleteAlsoJs=حذف جميع ملفات الجافا سكربت الخاصة بهذا الموقع الإلكتروني ؟
-DeleteAlsoMedias=Delete also all medias files specific to this website?
+DeleteAlsoMedias=حذف محتويات الاستديو الخاصة بهذا الموقع الإلكتروني ؟
-MyWebsitePages=My website pages
+MyWebsitePages=صفحات موقعي الإلكتروني
-SearchReplaceInto=Search | Replace into
+SearchReplaceInto=بحث|إستبدال
-ReplaceString=New string
+ReplaceString=النص البديل
-CSSContentTooltipHelp=Enter here CSS content. To avoid any conflict with the CSS of the application, be sure to prepend all declaration with the .bodywebsite class. For example:<br><br>#mycssselector, input.myclass:hover { ... }<br>must be<br>.bodywebsite #mycssselector, .bodywebsite input.myclass:hover { ... }<br><br>Note: If you have a large file without this prefix, you can use 'lessc' to convert it to append the .bodywebsite prefix everywhere.
+CSSContentTooltipHelp=ادخل هنا محتوى نصوص المظهر المتشعبة . لتجنب اي تعارض مع ملفات مظهر لتطبيقات اخرى تأكد من إستباق جميع التعريفات بالفئة .bodywebsite  . على بيل المثال :<br><br>#mycssselector, input.myclass:hover { ... }<br> لابد ان تكتب <br>.bodywebsite #mycssselector, .bodywebsite input.myclass:hover { ... }<br><br>ملاحظة : إذا كان لديك ملف كبير بدون السابقة يمكنك إستخدام lessc لتحويل الملف وإضافة السابقة .bodywebsite في كل مكان.
-LinkAndScriptsHereAreNotLoadedInEditor=Warning: This content is output only when site is accessed from a server. It is not used in Edit mode so if you need to load javascript files also in edit mode, just add your tag 'script src=...' into the page.
+LinkAndScriptsHereAreNotLoadedInEditor=تحذير : هذا المحتوى هو المخرجات فقط عند الوصول للموقع من جهة الخادم. وهو ليس المحتوى المستخدم في وضع التعديل لذلك اذا كنت تريد تحميل ملف جافاسكربت في وضع التعديل فقط اضف وسمك 'script src=...' للصفحة
-Dynamiccontent=Sample of a page with dynamic content
+Dynamiccontent=مثال على صفحة مع محتوى متحرك
-ImportSite=Import website template
+ImportSite=إستيراد قالب موقع إلكتروني
-EditInLineOnOff=Mode 'Edit inline' is %s
+EditInLineOnOff=وضع التعديل على السطر %s
-ShowSubContainersOnOff=Mode to execute 'dynamic content' is %s
+ShowSubContainersOnOff=وضع تنفيذ المحتوى المتحرك %s
-GlobalCSSorJS=Global CSS/JS/Header file of web site
+GlobalCSSorJS=ملف ترويسات المظهر\\جافاسكربت للموقع الإلكتروني
-BackToHomePage=Back to home page...
+BackToHomePage=عودة الى الصفحة الرئيسية
-TranslationLinks=Translation links
+TranslationLinks=روابط الترجمة
-YouTryToAccessToAFileThatIsNotAWebsitePage=You try to access to a page that is not available.<br>(ref=%s, type=%s, status=%s)
+YouTryToAccessToAFileThatIsNotAWebsitePage=انت تحاول الوصول الى صفحة غير متاحة <br>(مرجع=%s،النوع=%s،الحالة=%s)
-UseTextBetween5And70Chars=For good SEO practices, use a text between 5 and 70 characters
+UseTextBetween5And70Chars=لافضل إستخدام لتسريع محركات البحث، إستخدم نص ما بين 5 و 70 حرف.
-MainLanguage=Main language
+MainLanguage=اللغة الرئيسية
-OtherLanguages=Other languages
+OtherLanguages=لغات اخرى
-UseManifest=Provide a manifest.json file
+UseManifest=تقديم ملف قائمة جسون
-PublicAuthorAlias=Public author alias
+PublicAuthorAlias=لقب المحرر العام
-AvailableLanguagesAreDefinedIntoWebsiteProperties=Available languages are defined into website properties
+AvailableLanguagesAreDefinedIntoWebsiteProperties=اللغات المتاحة معرفة في خصائص الموقع الإلكتروني
-ReplacementDoneInXPages=Replacement done in %s pages or containers
+ReplacementDoneInXPages=تم الاستبدال في %s صفحة او حاوية
-RSSFeed=تغذية RSS
+RSSFeed=خلاصات المقالات
-RSSFeedDesc=You can get a RSS feed of latest articles with type 'blogpost' using this URL
+RSSFeedDesc=يمكنك الحصول على خلاصات المقالات من النوع "مدونة" بإستخدام الرابط
-PagesRegenerated=%s page(s)/container(s) regenerated
+PagesRegenerated=تم توليد %s صفحة\\حاوية
-RegenerateWebsiteContent=Regenerate web site cache files
+RegenerateWebsiteContent=إعادة توليد ملفات الموقع الإلكترونية المؤقتة 
-AllowedInFrames=Allowed in Frames
+AllowedInFrames=مسموح بها في الإطارات
-DefineListOfAltLanguagesInWebsiteProperties=Define list of all available languages into web site properties.
+DefineListOfAltLanguagesInWebsiteProperties=عرف قائمة بكل اللغات المتاحة في خصائص الموقع
-GenerateSitemaps=Generate website sitemap file
+GenerateSitemaps=توليد ملف خريطة الموقع
-ConfirmGenerateSitemaps=If you confirm, you will erase the existing sitemap file...
+ConfirmGenerateSitemaps=إذا اكدت ، ستقوم بحذف ملف خرطة الموقع الحالي...
-ConfirmSitemapsCreation=Confirm sitemap generation
+ConfirmSitemapsCreation=تأكيد توليد خريطة الموقع
-SitemapGenerated=Sitemap file <b>%s</b> generated
+SitemapGenerated=تم توليد ملف خريطة الموقع <b>%s</b>
-ImportFavicon=Favicon
+ImportFavicon=الايقونة
-ErrorFaviconType=Favicon must be png
+ErrorFaviconType=الأيقونة لابد ان تكون بي ان جي
-ErrorFaviconSize=Favicon must be sized 16x16, 32x32 or 64x64
+ErrorFaviconSize=لابد ان يكون حجم الأيقونة 16x16 ، 32x32 او 64x64 
-FaviconTooltip=Upload an image which needs to be a png (16x16, 32x32 or 64x64)
+FaviconTooltip=رفع صورة بي ان جي (16x16،32x32 او 64x64)

htdocs/langs/az_AZ/accountancy.lang

@@ -158,7 +158,7 @@ ACCOUNTING_LENGTH_AACCOUNT=Length of the third-party accounting accounts (If you
 ACCOUNTING_MANAGE_ZERO=Allow to manage different number of zeros at the end of an accounting account. Needed by some countries (like Switzerland). If set to off (default), you can set the following two parameters to ask the application to add virtual zeros.
 BANK_DISABLE_DIRECT_INPUT=Disable direct recording of transaction in bank account
 ACCOUNTING_ENABLE_EXPORT_DRAFT_JOURNAL=Enable draft export on journal
-ACCOUNTANCY_COMBO_FOR_AUX=Enable combo list for subsidiary account (may be slow if you have a lot of third parties)
+ACCOUNTANCY_COMBO_FOR_AUX=Enable combo list for subsidiary account (may be slow if you have a lot of third parties, break ability to search on a part of value)
 ACCOUNTING_DATE_START_BINDING=Define a date to start binding & transfer in accountancy. Below this date, the transactions will not be transferred to accounting.
 ACCOUNTING_DEFAULT_PERIOD_ON_TRANSFER=On accountancy transfer, select period show by default
 
@@ -328,6 +328,9 @@ ACCOUNTING_DISABLE_BINDING_ON_PURCHASES=Disable binding & transfer in accountanc
 ACCOUNTING_DISABLE_BINDING_ON_EXPENSEREPORTS=Disable binding & transfer in accountancy on expense reports (expense reports will not be taken into account in accounting)
 
 ## Export
+NotifiedExportDate=Notified export date (modification of the entries will not be possible)
+NotifiedValidationDate=Validation of the entries (modification or deletion of the entries will not be possible)
+ConfirmExportFile=Confirmation of the generation of the accounting export file ?
 ExportDraftJournal=Export draft journal
 Modelcsv=Model of export
 Selectmodelcsv=Select a model of export

htdocs/langs/az_AZ/admin.lang

@@ -221,8 +221,8 @@ NotCompatible=This module does not seem compatible with your Dolibarr %s (Min %s
 CompatibleAfterUpdate=This module requires an update to your Dolibarr %s (Min %s - Max %s).
 SeeInMarkerPlace=See in Market place
 SeeSetupOfModule=See setup of module %s
+SetOptionTo=Set option <b>%s</b> to %s
 Updated=Updated
-Nouveauté=Novelty
 AchatTelechargement=Buy / Download
 GoModuleSetupArea=To deploy/install a new module, go to the Module setup area: <a href="%s">%s</a>.
 DoliStoreDesc=DoliStore, the official market place for Dolibarr ERP/CRM external modules
@@ -399,6 +399,7 @@ SecurityToken=Key to secure URLs
 NoSmsEngine=No SMS sender manager available. A SMS sender manager is not installed with the default distribution because they depend on an external vendor, but you can find some on %s
 PDF=PDF
 PDFDesc=Global options for PDF generation
+PDFOtherDesc=PDF Option specific to some modules
 PDFAddressForging=Rules for address section
 HideAnyVATInformationOnPDF=Hide all information related to Sales Tax / VAT
 PDFRulesForSalesTax=Rules for Sales Tax / VAT
@@ -561,7 +562,7 @@ Module53Desc=Management of Services
 Module54Name=Contracts/Subscriptions
 Module54Desc=Management of contracts (services or recurring subscriptions)
 Module55Name=Barcodes
-Module55Desc=Barcode management
+Module55Desc=Barcode or QR code management
 Module56Name=Payment by credit transfer
 Module56Desc=Management of payment of suppliers by Credit Transfer orders. It includes generation of SEPA file for European countries.
 Module57Name=Payments by Direct Debit
@@ -848,10 +849,10 @@ Permission402=Create/modify discounts
 Permission403=Validate discounts
 Permission404=Delete discounts
 Permission430=Use Debug Bar
-Permission511=Read payments of salaries (yours and subordinates)
+Permission511=Read salaries and payments (yours and subordinates)
-Permission512=Create/modify payments of salaries
+Permission512=Create/modify salaries and payments
-Permission514=Delete payments of salaries
+Permission514=Delete salaries and payments
-Permission517=Read payments of salaries of everybody
+Permission517=Read salaries and payments everybody
 Permission519=Export salaries
 Permission520=Read Loans
 Permission522=Create/modify loans
@@ -965,6 +966,8 @@ Permission23003=Delete Scheduled job
 Permission23004=Execute Scheduled job
 Permission50101=Use Point of Sale (SimplePOS)
 Permission50151=Use Point of Sale (TakePOS)
+Permission50152=Edit sales lines
+Permission50153=Edit ordered sales lines
 Permission50201=Read transactions
 Permission50202=Import transactions
 Permission50330=Read objects of Zapier
@@ -1039,11 +1042,12 @@ DictionaryMeasuringUnits=Measuring Units
 DictionarySocialNetworks=Social Networks
 DictionaryProspectStatus=Prospect status for companies
 DictionaryProspectContactStatus=Prospect status for contacts
-DictionaryHolidayTypes=Types of leave
+DictionaryHolidayTypes=Leave - Types of leave
 DictionaryOpportunityStatus=Lead status for project/lead
 DictionaryExpenseTaxCat=Expense report - Transportation categories
 DictionaryExpenseTaxRange=Expense report - Range by transportation category
 DictionaryTransportMode=Intracomm report - Transport mode
+DictionaryBatchStatus=Product lot/serial Quality Control status
 TypeOfUnit=Type of unit
 SetupSaved=Setup saved
 SetupNotSaved=Setup not saved
@@ -1187,7 +1191,7 @@ SetupDescription4=<a href="%s">%s -> %s</a><br><br>This software is a suite of m
 SetupDescription5=Other Setup menu entries manage optional parameters.
 AuditedSecurityEvents=Security events that are audited
 NoSecurityEventsAreAduited=No security events are audited. You can enable them from menu %s
-Audit=Audit
+Audit=Security events
 InfoDolibarr=About Dolibarr
 InfoBrowser=About Browser
 InfoOS=About OS
@@ -1319,9 +1323,12 @@ ConditionIsCurrently=Condition is currently %s
 YouUseBestDriver=You use driver %s which is the best driver currently available.
 YouDoNotUseBestDriver=You use driver %s but driver %s is recommended.
 NbOfObjectIsLowerThanNoPb=You have only %s %s in the database. This does not require any particular optimization.
+ComboListOptim=Combo list loading optimization
 SearchOptim=Search optimization
-YouHaveXObjectUseSearchOptim=You have %s %s in the database. You can add the constant %s to 1 in Home-Setup-Other. Limit the search to the beginning of strings which makes it possible for the database to use indexes and you should get an immediate response.
+YouHaveXObjectUseComboOptim=You have %s %s in the database. You can go into setup of module to enable loading of combo list on key pressed event.
-YouHaveXObjectAndSearchOptimOn=You have %s %s in the database and constant %s is set to 1 in Home-Setup-Other.
+YouHaveXObjectUseSearchOptim=You have %s %s in the database. You can add the constant %s to 1 in Home-Setup-Other.
+YouHaveXObjectUseSearchOptimDesc=This limits the search to the beginning of strings which makes it possible for the database to use indexes and you should get an immediate response.
+YouHaveXObjectAndSearchOptimOn=You have %s %s in the database and constant %s is set to %s in Home-Setup-Other.
 BrowserIsOK=You are using the %s web browser. This browser is ok for security and performance.
 BrowserIsKO=You are using the %s web browser. This browser is known to be a bad choice for security, performance and reliability. We recommend using Firefox, Chrome, Opera or Safari.
 PHPModuleLoaded=PHP component %s is loaded
@@ -1433,6 +1440,7 @@ MemberMainOptions=Main options
 AdherentLoginRequired= Manage a Login for each member
 AdherentMailRequired=Email required to create a new member
 MemberSendInformationByMailByDefault=Checkbox to send mail confirmation to members (validation or new subscription) is on by default
+MemberCreateAnExternalUserForSubscriptionValidated=Create an external user login for each new member subscription validated
 VisitorCanChooseItsPaymentMode=Visitor can choose from available payment modes
 MEMBER_REMINDER_EMAIL=Enable automatic reminder <b>by email</b> of expired subscriptions. Note: Module <strong>%s</strong> must be enabled and correctly setup to send reminders.
 MembersDocModules=Document templates for documents generated from member record
@@ -1763,7 +1771,7 @@ AGENDA_DEFAULT_VIEW=Which view do you want to open by default when selecting men
 AGENDA_REMINDER_BROWSER=Enable event reminder <b>on user's browser</b> (When remind date is reached, a popup is shown by the browser. Each user can disable such notifications from its browser notification setup).
 AGENDA_REMINDER_BROWSER_SOUND=Enable sound notification
 AGENDA_REMINDER_EMAIL=Enable event reminder <b>by emails</b> (remind option/delay can be defined on each event).
-AGENDA_REMINDER_EMAIL_NOTE=Note: The frequency of the task %s must be enough to be sure that the remind are sent at the correct moment.
+AGENDA_REMINDER_EMAIL_NOTE=Note: The frequency of the scheduled job %s must be enough to be sure that the remind are sent at the correct moment.
 AGENDA_SHOW_LINKED_OBJECT=Show linked object into agenda view
 ##### Clicktodial #####
 ClickToDialSetup=Click To Dial module setup
@@ -1979,6 +1987,8 @@ MAIN_PDF_MARGIN_RIGHT=Right margin on PDF
 MAIN_PDF_MARGIN_TOP=Top margin on PDF
 MAIN_PDF_MARGIN_BOTTOM=Bottom margin on PDF
 MAIN_DOCUMENTS_LOGO_HEIGHT=Height for logo on PDF
+MAIN_GENERATE_PROPOSALS_WITH_PICTURE=Add picture on proposal line
+MAIN_PDF_PROPAL_USE_ELECTRONIC_SIGNING=Add electronic sign in PDF
 NothingToSetup=There is no specific setup required for this module.
 SetToYesIfGroupIsComputationOfOtherGroups=Set this to yes if this group is a computation of other groups
 EnterCalculationRuleIfPreviousFieldIsYes=Enter calculation rule if previous field was set to Yes.<br>For example:<br>CODEGRP1+CODEGRP2
@@ -2096,7 +2106,6 @@ PDF_SHOW_PROJECT=Show project on document
 ShowProjectLabel=Project Label
 PDF_USE_ALSO_LANGUAGE_CODE=If you want to have some texts in your PDF duplicated in 2 different languages in the same generated PDF, you must set here this second language so generated PDF will contains 2 different languages in same page, the one chosen when generating PDF and this one (only few PDF templates support this). Keep empty for 1 language per PDF.
 FafaIconSocialNetworksDesc=Enter here the code of a FontAwesome icon. If you don't know what is FontAwesome, you can use the generic value fa-address-book.
-FeatureNotAvailableWithReceptionModule=Feature not available when module Reception is enabled
 RssNote=Note: Each RSS feed definition provides a widget that you must enable to have it available in dashboard
 JumpToBoxes=Jump to Setup -> Widgets
 MeasuringUnitTypeDesc=Use here a value like "size", "surface", "volume", "weight", "time"
@@ -2120,12 +2129,18 @@ ConfFileIsReadableOrWritableByAnyUsers=The conf file is readable or writable by
 MailToSendEventOrganization=Event Organization
 AGENDA_EVENT_DEFAULT_STATUS=Default event status when creating a event from the form
 YouShouldDisablePHPFunctions=You should disable PHP functions
-IfCLINotRequiredYouShouldDisablePHPFunctions=Except if you need to run system commands (for the module Scheduled job, or to run the external command line Anti-virus for example), you shoud disable PHP functions
+IfCLINotRequiredYouShouldDisablePHPFunctions=Except if you need to run system commands in custom code, you shoud disable PHP functions
+PHPFunctionsRequiredForCLI=For shell purpose (like scheduled job backup or running an anitivurs program), you must keep PHP functions
 NoWritableFilesFoundIntoRootDir=No writable files or directories of the common programs were found into your root directory (Good)
 RecommendedValueIs=Recommended: %s
+NotRecommended=Not recommanded
 ARestrictedPath=A restricted path
 CheckForModuleUpdate=Check for external modules updates
 CheckForModuleUpdateHelp=This action will connect to editors of external modules to check if a new version is available.
 ModuleUpdateAvailable=An update is available
 NoExternalModuleWithUpdate=No updates found for external modules
 SwaggerDescriptionFile=Swagger API description file (for use with redoc for example)
+YouEnableDeprecatedWSAPIsUseRESTAPIsInstead=You enabled deprecated WS API. You should use REST API instead.
+RandomlySelectedIfSeveral=Randomly selected if several pictures are available
+DatabasePasswordObfuscated=Database password is obfuscated in conf file
+DatabasePasswordNotObfuscated=Database password is NOT obfuscated in conf file

htdocs/langs/az_AZ/agenda.lang

@@ -4,7 +4,7 @@ Actions=Events
 Agenda=Agenda
 TMenuAgenda=Agenda
 Agendas=Agendas
-LocalAgenda=Internal calendar
+LocalAgenda=Default calendar
 ActionsOwnedBy=Event owned by
 ActionsOwnedByShort=Owner
 AffectedTo=Assigned to
@@ -14,13 +14,13 @@ EventsNb=Number of events
 ListOfActions=List of events
 EventReports=Event reports
 Location=Location
-ToUserOfGroup=Event assigned to any user in group
+ToUserOfGroup=Event assigned to any user in the group
 EventOnFullDay=Event on all day(s)
 MenuToDoActions=All incomplete events
 MenuDoneActions=All terminated events
 MenuToDoMyActions=My incomplete events
 MenuDoneMyActions=My terminated events
-ListOfEvents=List of events (internal calendar)
+ListOfEvents=List of events (default calendar)
 ActionsAskedBy=Events reported by
 ActionsToDoBy=Events assigned to
 ActionsDoneBy=Events done by
@@ -38,6 +38,7 @@ ActionsEvents=Events for which Dolibarr will create an action in agenda automati
 EventRemindersByEmailNotEnabled=Event reminders by email was not enabled into %s module setup.
 ##### Agenda event labels #####
 NewCompanyToDolibarr=Third party %s created
+COMPANY_MODIFYInDolibarr=Third party %s modified
 COMPANY_DELETEInDolibarr=Third party %s deleted
 ContractValidatedInDolibarr=Contract %s validated
 CONTRACT_DELETEInDolibarr=Contract %s deleted
@@ -87,6 +88,7 @@ OrderDeleted=Order deleted
 InvoiceDeleted=Invoice deleted
 DraftInvoiceDeleted=Draft invoice deleted
 CONTACT_CREATEInDolibarr=Contact %s created
+CONTACT_MODIFYInDolibarr=Contact %s modified
 CONTACT_DELETEInDolibarr=Contact %s deleted
 PRODUCT_CREATEInDolibarr=Product %s created
 PRODUCT_MODIFYInDolibarr=Product %s modified
@@ -119,6 +121,7 @@ MRP_MO_UNVALIDATEInDolibarr=MO set to draft status
 MRP_MO_PRODUCEDInDolibarr=MO produced
 MRP_MO_DELETEInDolibarr=MO deleted
 MRP_MO_CANCELInDolibarr=MO canceled
+PAIDInDolibarr=%s paid
 ##### End agenda events #####
 AgendaModelModule=Document templates for event
 DateActionStart=Start date
@@ -130,7 +133,7 @@ AgendaUrlOptions4=<b>logint=%s</b> to restrict output to actions assigned to use
 AgendaUrlOptionsProject=<b>project=__PROJECT_ID__</b> to restrict output to actions linked to project <b>__PROJECT_ID__</b>.
 AgendaUrlOptionsNotAutoEvent=<b>notactiontype=systemauto</b> to exclude automatic events.
 AgendaUrlOptionsIncludeHolidays=<b>includeholidays=1</b> to include events of holidays.
-AgendaShowBirthdayEvents=Show birthdays of contacts
+AgendaShowBirthdayEvents=Birthdays of contacts
 AgendaHideBirthdayEvents=Hide birthdays of contacts
 Busy=Busy
 ExportDataset_event1=List of agenda events
@@ -152,6 +155,7 @@ ActionType=Event type
 DateActionBegin=Start event date
 ConfirmCloneEvent=Are you sure you want to clone the event <b>%s</b>?
 RepeatEvent=Repeat event
+OnceOnly=Once only
 EveryWeek=Every week
 EveryMonth=Every month
 DayOfMonth=Day of month
@@ -165,4 +169,4 @@ TimeType=Duration type
 ReminderType=Callback type
 AddReminder=Create an automatic reminder notification for this event
 ErrorReminderActionCommCreation=Error creating the reminder notification for this event
-BrowserPush=Browser Notification
+BrowserPush=Browser Popup Notification

htdocs/langs/az_AZ/bills.lang

@@ -259,6 +259,7 @@ DateMaxPayment=Payment due on
 DateInvoice=Invoice date
 DatePointOfTax=Point of tax
 NoInvoice=No invoice
+NoOpenInvoice=No open invoice
 ClassifyBill=Classify invoice
 SupplierBillsToPay=Unpaid vendor invoices
 CustomerBillsUnpaid=Unpaid customer invoices
@@ -589,3 +590,4 @@ FacParentLine=Invoice Line Parent
 SituationTotalRayToRest=Remainder to pay without taxe
 PDFSituationTitle=Situation n° %d
 SituationTotalProgress=Total progress %d %%
+SearchUnpaidInvoicesWithDueDate=Search unpaid invoices with a due date = %s

htdocs/langs/az_AZ/cashdesk.lang

@@ -102,7 +102,7 @@ CashDeskGenericMaskCodes6 = <br><b>{TN}</b> tag is used to add the terminal numb
 TakeposGroupSameProduct=Group same products lines
 StartAParallelSale=Start a new parallel sale
 SaleStartedAt=Sale started at %s
-ControlCashOpening=Control cash popup at opening POS
+ControlCashOpening=Open the "Control cash" popup when opening the POS
 CloseCashFence=Close cash desk control
 CashReport=Cash report
 MainPrinterToUse=Main printer to use
@@ -126,5 +126,5 @@ ModuleReceiptPrinterMustBeEnabled=Module Receipt printer must have been enabled
 AllowDelayedPayment=Allow delayed payment
 PrintPaymentMethodOnReceipts=Print payment method on tickets|receipts
 WeighingScale=Weighing scale
-ShowPriceHT = Display the price excluding tax column
+ShowPriceHT = Display the column with the price excluding tax (on screen)
-ShowPriceHTOnReceipt = Display the price excluding tax column on receipt
+ShowPriceHTOnReceipt = Display the column with the price excluding tax (on receipt)

htdocs/langs/az_AZ/compta.lang

@@ -286,3 +286,9 @@ ReportPurchaseTurnover=Purchase turnover invoiced
 ReportPurchaseTurnoverCollected=Purchase turnover collected
 IncludeVarpaysInResults = Include various payments in reports
 IncludeLoansInResults = Include loans in reports
+InvoiceLate30Days = Invoices late > 30 days
+InvoiceLate15Days = Invoices late > 15 days
+InvoiceLateMinus15Days = Invoices late
+InvoiceNotLate = To be collected < 15 days
+InvoiceNotLate15Days = To be collected in 15 days
+InvoiceNotLate30Days = To be collected in 30 days

htdocs/langs/az_AZ/cron.lang

@@ -60,7 +60,7 @@ CronErrEndDateStartDt=End date cannot be before start date
 StatusAtInstall=Status at module installation
 CronStatusActiveBtn=Schedule
 CronStatusInactiveBtn=Disable
-CronTaskInactive=This job is disabled
+CronTaskInactive=This job is disabled (not scheduled)
 CronId=Id
 CronClassFile=Filename with class
 CronModuleHelp=Name of Dolibarr module directory (also work with external Dolibarr module). <BR> For example to call the fetch method of Dolibarr Product object /htdocs/<u>product</u>/class/product.class.php, the value for module is<br><i>product</i>

htdocs/langs/az_AZ/errors.lang

@@ -11,6 +11,7 @@ ErrorBadValueForParamNotAString=Bad value for your parameter. It appends general
 ErrorRefAlreadyExists=Reference <b>%s</b> already exists.
 ErrorLoginAlreadyExists=Login %s already exists.
 ErrorGroupAlreadyExists=Group %s already exists.
+ErrorEmailAlreadyExists=Email %s already exists.
 ErrorRecordNotFound=Record not found.
 ErrorFailToCopyFile=Failed to copy file '<b>%s</b>' into '<b>%s</b>'.
 ErrorFailToCopyDir=Failed to copy directory '<b>%s</b>' into '<b>%s</b>'.
@@ -117,7 +118,7 @@ ErrorCantReadFile=Failed to read file '%s'
 ErrorCantReadDir=Failed to read directory '%s'
 ErrorBadLoginPassword=Bad value for login or password
 ErrorLoginDisabled=Your account has been disabled
-ErrorFailedToRunExternalCommand=Failed to run external command. Check it is available and runnable by your PHP server. If PHP <b>Safe Mode</b> is enabled, check that command is inside a directory defined by parameter <b>safe_mode_exec_dir</b>.
+ErrorFailedToRunExternalCommand=Failed to run external command. Check it is available and runnable by your PHP server user. Check also the command is not protected on shell level by a security layer like apparmor.
 ErrorFailedToChangePassword=Failed to change password
 ErrorLoginDoesNotExists=User with login <b>%s</b> could not be found.
 ErrorLoginHasNoEmail=This user has no email address. Process aborted.
@@ -262,6 +263,7 @@ ErrorDateIsInFuture=Error, the date can't be in the future
 ErrorAnAmountWithoutTaxIsRequired=Error, amount is mandatory
 ErrorAPercentIsRequired=Error, please fill in the percentage correctly
 ErrorYouMustFirstSetupYourChartOfAccount=You must first setup your chart of account
+ErrorFailedToFindEmailTemplate=Failed to find template with code name %s
 
 # Warnings
 WarningParamUploadMaxFileSizeHigherThanPostMaxSize=Your PHP parameter upload_max_filesize (%s) is higher than PHP parameter post_max_size (%s). This is not a consistent setup.
@@ -298,3 +300,4 @@ WarningModuleXDisabledSoYouMayMissEventHere=Module %s has not been enabled. So y
 ErrorActionCommPropertyUserowneridNotDefined=User's owner is required
 ErrorActionCommBadType=Selected event type (id: %n, code: %s) do not exist in Event Type dictionary
 CheckVersionFail=Version check fail
+ErrorWrongFileName=Name of the file cannot have __SOMETHING__ in it

htdocs/langs/az_AZ/eventorganization.lang

@@ -1,4 +1,5 @@
 # Copyright (C) 2021		Florian Henry			<florian.henry@scopen.fr>
+# Copyright (C) 2021		Dorian Vabre			<dorian.vabre@gmail.com>
 #
 # This program is free software: you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -81,7 +82,10 @@ PriceOfBoothHelp=Subscription price to stand a booth
 EventOrganizationICSLink=Link ICS for events
 ConferenceOrBoothInformation=Conference Or Booth informations
 Attendees = Attendees
+DownloadICSLink = Download ICS link
 EVENTORGANIZATION_SECUREKEY = Secure Key of the public registration link to a conference
+SERVICE_BOOTH_LOCATION = Service used for the invoice row about a booth location
+SERVICE_CONFERENCE_ATTENDEE_SUBSCRIPTION = Service used for the invoice row about an attendee subscription to a conference
 #
 # Status
 #
@@ -94,8 +98,46 @@ EvntOrgCancelled = Cancelled
 #
 # Public page
 #
+SuggestForm = Suggestion page
+RegisterPage = Page for conferences or booth
+EvntOrgRegistrationHelpMessage = Here, you can vote for an event, or suggest a new conference or booth for the project
+EvntOrgRegistrationConfHelpMessage = Here, you can suggest a new conference for the project
+EvntOrgRegistrationBoothHelpMessage = Here, you can suggest a new booth for the project
+ListOfSuggestedConferences = List of suggested conferences
+ListOfSuggestedBooths = List of suggested booths
+SuggestConference = Suggest a new conference
+SuggestBooth = Suggest a booth
+ViewAndVote = View and vote for suggested events
 PublicAttendeeSubscriptionPage = Public link of registration to a conference
 MissingOrBadSecureKey = The security key is invalid or missing
-EvntOrgWelcomeMessage = This form allows you to register as a new participant to the conference
+EvntOrgWelcomeMessage = This form allows you to register as a new participant to the conference : '%s'
-EvntOrgStartDuration = This conference starts on
+EvntOrgDuration = This conference starts on %s and ends on %s.
-EvntOrgEndDuration =  and ends on
+ConferenceAttendeeFee = Conference attendee fee for the event : '%s' occurring from %s to %s.
+BoothLocationFee = Booth location for the event : '%s' occurring from %s to %s
+EventType = Event type
+
+#
+# Vote page
+#
+EvntOrgRegistrationWelcomeMessage = Welcome on the conference or booth suggestion page.
+EvntOrgRegistrationConfWelcomeMessage = Welcome on the conference suggestion page.
+EvntOrgRegistrationBoothWelcomeMessage = Welcome on the booth suggestion page.
+EvntOrgVoteHelpMessage = Here, you can view and vote for the suggested events for the project
+VoteOk = Your vote has been accepted.
+AlreadyVoted = You have already voted for this event.
+VoteError = An error has occurred during the vote, please try again.
+
+#
+# SubscriptionOk page
+#
+SubscriptionOk = Your subscription to this conference has been validated
+#
+# Subscription validation mail
+#
+ConfAttendeeSubscriptionConfirmation = Confirmation of your subscription to a conference
+#
+# Payment page
+#
+Attendee = Attendee
+PaymentConferenceAttendee = Conference attendee payment
+PaymentBoothLocation = Booth location payment

htdocs/langs/az_AZ/hrm.lang

@@ -9,7 +9,7 @@ ConfirmDeleteEstablishment=Are you sure you wish to delete this establishment?
 OpenEtablishment=Open establishment
 CloseEtablishment=Close establishment
 # Dictionary
-DictionaryPublicHolidays=HRM - Public holidays
+DictionaryPublicHolidays=Leave - Public holidays
 DictionaryDepartment=HRM - Department list
 DictionaryFunction=HRM - Job positions
 # Module